[Wed Sep 28 18:14:23 2011] Detection parameters:
  Position = (420.2, 404.5) = 9 13 20.67 35 6 36.0
  Extent = 6.3" x 5.3", rotation angle = 14 degrees
  Source counts = 45.4 +/- 10.8
  Background counts = 71.6
  Rate = 0.002 +/- 0.0004

[Wed Sep 28 18:14:23 2011] Off-axis axis estimate = 12.63'
[Wed Sep 28 18:15:08 2011] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 18:15:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 18:15:08 2011] Initial guess for spatial extent in simple fitting = 7.15"
[Wed Sep 28 18:15:08 2011] source mask rpix=14.5, npix_max = 902, mask sum = 930, frac = 1.030
[Wed Sep 28 18:15:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.15"
[Wed Sep 28 18:15:08 2011] fullrun_ccd2_acisf11777_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 18:15:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11777_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 18:15:08 2011] fullrun_ccd2_acisf11777_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 18:15:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11777_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 18:15:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11777_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11777_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 18:15:09 2011] fullrun_ccd2_acisf11777_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 18:15:09 2011] fullrun_ccd2_acisf11777_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 18:15:09 2011] Fit fullrun_ccd2_acisf11777_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 18:15:15 2011] Spatial fit model total counts = 275.054000, observed total counts = 275.000000
[Wed Sep 28 18:15:15 2011] Offset between fit and detection position for source 1 = 3.169218 pixels
[Wed Sep 28 18:15:15 2011] 275.266500 total counts/ 218.272000 bgd. counts: snr = 3.857749
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.169218 pixels
  Position = (421.8, 407.2) = 9 13 20.62 35 6 37.1
  Extent = 6.6 (4.3-10.5)", rotation angle = 0
  Source counts = 57.0 +/- 16.6
  Background counts = 218.3
  Rate = 0.002 +/- 0.0006
[Wed Sep 28 18:15:15 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 18:15:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 18:15:15 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 18:15:15 2011] Source does appear to be extended
[Wed Sep 28 18:15:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 18:15:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 18:15:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 18:15:35 2011] Initial guess for spatial extent in simple fitting = 6.62"
[Wed Sep 28 18:15:35 2011] source mask rpix=13.5, npix_max = 778, mask sum = 784, frac = 1.007
[Wed Sep 28 18:15:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.62"
[Wed Sep 28 18:15:35 2011] fullrun_ccd2_acisf11777_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 18:15:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11777_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 18:15:35 2011] fullrun_ccd2_acisf11777_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 18:15:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11777_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 18:15:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11777_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11777_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 18:15:35 2011] fullrun_ccd2_acisf11777_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 18:15:35 2011] fullrun_ccd2_acisf11777_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 18:15:35 2011] Fit fullrun_ccd2_acisf11777_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 18:15:42 2011] Spatial fit model total counts = 249.981000, observed total counts = 250.000000
[Wed Sep 28 18:15:42 2011] Offset between fit and detection position for source 1 = 0.640498 pixels
[Wed Sep 28 18:15:42 2011] 250.128800 total counts/ 196.310000 bgd. counts: snr = 3.841164
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.640498 pixels
  Position = (422.4, 406.9) = 9 13 20.60 35 6 36.9
  Extent = 6.4 (4.1-10.0)", rotation angle = 0
  Source counts = 53.8 +/- 15.8
  Background counts = 196.3
  Rate = 0.002 +/- 0.0005
[Wed Sep 28 18:15:42 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 18:15:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 18:15:42 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 18:15:42 2011] Source does appear to be extended
[Wed Sep 28 18:15:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 18:16:01 2011] Not overwriting source region fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 28 18:16:01 2011] Extracting stamp from image fullrun_ccd2_acisf11777_pi14-548_cl_sm2.00.img.gz, (132, 116) - (713, 697)
[Wed Sep 28 18:16:01 2011] Writing fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1.gif
[Wed Sep 28 18:16:02 2011] ../../acisf11777/products/events/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1_src.evt and ../../acisf11777/products/events/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 28 18:16:02 2011] Size of ../../acisf11777/products/events/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1_src.evt.gz[events] = 191 counts
[Wed Sep 28 18:16:02 2011] Mean chipx,y = (368.91, 744.39)
[Wed Sep 28 18:16:02 2011] Mean tdetx,y = (3805.39, 3717.09)
[Wed Sep 28 18:16:02 2011] chipx,y range = (309.00-433.00, 695.00-802.00)
[Wed Sep 28 18:16:02 2011] Size of ../../acisf11777/products/events/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1099 counts
[Wed Sep 28 18:16:02 2011] ../../acisf11777/products/images/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1_src.img and ../../acisf11777/products/images/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 28 18:16:02 2011] Not generating rmf since there are only 53 counts
[Wed Sep 28 18:16:02 2011] arf not found, will run specextract
[Wed Sep 28 18:16:32 2011] ../../acisf11777/products/spectra/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1.warf not found
[Wed Sep 28 18:16:32 2011] ../../acisf11777/products/spectra/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1.wrmf not found
[Wed Sep 28 18:16:32 2011] Removal of ../../acisf11777/products/spectra/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1.soff failed
[Wed Sep 28 18:16:37 2011] ../../acisf11777/products/lightcurves/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1_src.lc and ../../acisf11777/products/lightcurves/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 28 18:17:49 2011] Spectrum 1 has only 54 counts, deleting rmf
[Wed Sep 28 18:17:49 2011] 152.771
[Wed Sep 28 18:34:39 2011] Updating aperture counts using extracted products
[Wed Sep 28 18:34:39 2011] Error reading totcts from fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 28 18:34:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 18:34:39 2011] Using photon index=1.80, rate=0.00184, arf fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 18:34:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 18:34:39 2011] Updating source flux to 2.6e-14
[Wed Sep 28 18:34:43 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 18:34:44 2011] acisf11777/analysis//spectral/fullrun_ccd2_acisf11777_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete