[Sun Oct 30 19:27:12 2011] Detection parameters:
  Position = (870.3, 720.2) = 9 12 54.48 76 30 2.4
  Extent = 0.6" x 0.5", rotation angle = 160 degrees
  Source counts = 228.6 +/- 15.3
  Background counts = 4.4
  Rate = 0.008 +/- 0.0005

[Sun Oct 30 19:27:14 2011] Off-axis axis estimate = 3.49'
[Sun Oct 30 19:28:01 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 19:28:01 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Sun Oct 30 19:28:01 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.105
[Sun Oct 30 19:28:01 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.69"
[Sun Oct 30 19:28:01 2011] fullrun_ccd7_acisf11776_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 19:28:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11776_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 19:28:02 2011] fullrun_ccd7_acisf11776_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 19:28:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11776_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 19:28:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11776_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11776_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 19:28:02 2011] fullrun_ccd7_acisf11776_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 19:28:02 2011] fullrun_ccd7_acisf11776_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 19:28:02 2011] Fit fullrun_ccd7_acisf11776_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 30 19:28:11 2011] Source 1 is offset by 5.956841 and -6.242363 pixels which is larger than
2 X fitted extent = 0.701455 x 0.701455, not incorporating fit results
[Sun Oct 30 19:28:11 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 19:28:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 19:28:11 2011] Assessing source extent using major
[Sun Oct 30 19:28:11 2011] Source does appear to be extended
[Sun Oct 30 19:28:11 2011] Computing asymmetry using major and minor axis, asym = 1.25
[Sun Oct 30 19:28:31 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 19:28:31 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Sun Oct 30 19:28:31 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.105
[Sun Oct 30 19:28:31 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.69"
[Sun Oct 30 19:28:32 2011] fullrun_ccd7_acisf11776_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 19:28:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11776_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 19:28:32 2011] fullrun_ccd7_acisf11776_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 19:28:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11776_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 19:28:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11776_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11776_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 19:28:33 2011] fullrun_ccd7_acisf11776_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 19:28:33 2011] fullrun_ccd7_acisf11776_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 19:28:33 2011] Fit fullrun_ccd7_acisf11776_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 30 19:28:42 2011] Spatial fit model total counts = 234.379000, observed total counts = 234.000000
[Sun Oct 30 19:28:42 2011] Offset between fit and detection position for source 1 = 0.653326 pixels
[Sun Oct 30 19:28:42 2011] 235.150400 total counts/ 14.794400 bgd. counts: snr = 57.289654
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.653326 pixels
  Position = (870.8, 720.7) = 9 12 54.48 76 30 2.4
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 220.4 +/- 15.3
  Background counts = 14.8
  Rate = 0.007 +/- 0.0005
[Sun Oct 30 19:28:42 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 19:28:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 19:28:42 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 19:28:42 2011] Source does appear to be extended
[Sun Oct 30 19:28:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 19:30:13 2011] Not overwriting source region fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 30 19:30:13 2011] Extracting stamp from image fullrun_ccd7_acisf11776_pi14-548_cl_sm2.00.img.gz, (838, 688) - (904, 754)
[Sun Oct 30 19:30:13 2011] Writing fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1.gif
[Sun Oct 30 19:30:21 2011] ../../acisf11776/products/events/fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_src.evt and ../../acisf11776/products/events/fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 30 19:30:22 2011] Size of ../../acisf11776/products/events/fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_src.evt.gz[events] = 229 counts
[Sun Oct 30 19:30:22 2011] Mean chipx,y = (603.86, 621.43)
[Sun Oct 30 19:30:22 2011] Mean tdetx,y = (4520.86, 2323.43)
[Sun Oct 30 19:30:22 2011] chipx,y range = (585.00-621.00, 603.00-640.00)
[Sun Oct 30 19:30:22 2011] Size of ../../acisf11776/products/events/fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 28 counts
[Sun Oct 30 19:30:22 2011] ../../acisf11776/products/images/fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_src.img and ../../acisf11776/products/images/fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 30 19:30:22 2011] ../../acisf11776/products/spectra/fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_src.pi and ../../acisf11776/products/spectra/fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 30 19:30:24 2011] ../../acisf11776/products/lightcurves/fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_src.lc and ../../acisf11776/products/lightcurves/fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 30 19:31:48 2011] Keeping rmf generated by specextract
[Sun Oct 30 19:31:49 2011] 224.139
[Sun Oct 30 19:31:52 2011] Updating aperture counts using extracted products
[Sun Oct 30 19:31:52 2011] Error reading totcts from fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 30 19:31:53 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 19:31:53 2011] Using photon index=1.80, rate=0.00743, arf fullrun_ccd7_acisf11776_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 19:31:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 19:31:53 2011] Updating source flux to 5.7e-14
[Sun Oct 30 19:32:03 2011] Flag b found in src. 1 procflags, skipping spectral fitting