[Thu Oct  6 03:28:37 2011] Detection parameters:
  Position = (852.5, 609.8) = 1 5 14.48 0 2 26.2
  Extent = 0.5" x 0.5", rotation angle = 160 degrees
  Source counts = 188.4 +/- 13.8
  Background counts = 1.6
  Rate = 0.01 +/- 0.0009

[Thu Oct  6 03:28:37 2011] Off-axis axis estimate = 4.84'
[Thu Oct  6 03:29:41 2011] Using EEF radius (= 1.12 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 03:29:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 03:29:41 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Thu Oct  6 03:29:41 2011] source mask rpix=2.3, npix_max = 30, mask sum = 28, frac = 0.913
[Thu Oct  6 03:29:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.12"
[Thu Oct  6 03:29:43 2011] fullrun_ccd1_acisf11765_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct  6 03:29:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11765_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 03:29:43 2011] fullrun_ccd1_acisf11765_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct  6 03:29:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11765_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 03:29:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11765_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11765_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 03:29:43 2011] fullrun_ccd1_acisf11765_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 03:29:43 2011] fullrun_ccd1_acisf11765_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 03:29:43 2011] Fit fullrun_ccd1_acisf11765_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 03:29:51 2011] Spatial fit model total counts = 208.769000, observed total counts = 210.000000
[Thu Oct  6 03:29:51 2011] Offset between fit and detection position for source 1 = 0.804225 pixels
[Thu Oct  6 03:29:51 2011] 207.903800 total counts/ 10.458800 bgd. counts: snr = 61.052747
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.804225 pixels
  Position = (853.0, 610.5) = 1 5 14.48 0 2 26.3
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 197.4 +/- 14.4
  Background counts = 10.5
  Rate = 0.01 +/- 0.001
[Thu Oct  6 03:29:51 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 03:29:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 03:29:51 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 03:29:51 2011] Source does appear to be extended
[Thu Oct  6 03:29:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 03:30:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 03:30:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 03:30:10 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Thu Oct  6 03:30:10 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.115
[Thu Oct  6 03:30:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.80"
[Thu Oct  6 03:30:13 2011] fullrun_ccd1_acisf11765_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct  6 03:30:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11765_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 03:30:14 2011] fullrun_ccd1_acisf11765_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct  6 03:30:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11765_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 03:30:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11765_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11765_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 03:30:15 2011] fullrun_ccd1_acisf11765_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 03:30:15 2011] fullrun_ccd1_acisf11765_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 03:30:15 2011] Fit fullrun_ccd1_acisf11765_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 03:30:21 2011] Spatial fit model total counts = 205.449000, observed total counts = 208.000000
[Thu Oct  6 03:30:21 2011] Offset between fit and detection position for source 1 = 0.041168 pixels
[Thu Oct  6 03:30:21 2011] 204.429800 total counts/ 10.280800 bgd. counts: snr = 60.551053
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.041168 pixels
  Position = (853.0, 610.5) = 1 5 14.48 0 2 26.3
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 194.1 +/- 14.3
  Background counts = 10.3
  Rate = 0.01 +/- 0.001
[Thu Oct  6 03:30:21 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 03:30:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 03:30:21 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 03:30:21 2011] Source does appear to be extended
[Thu Oct  6 03:30:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 03:31:38 2011] Not overwriting source region fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_src.reg
[Thu Oct  6 03:31:38 2011] Extracting stamp from image fullrun_ccd1_acisf11765_pi14-548_cl_sm2.00.img.gz, (817, 574) - (889, 646)
[Thu Oct  6 03:31:38 2011] Writing fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1.gif
[Thu Oct  6 03:31:38 2011] ../../acisf11765/products/events/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_src.evt and ../../acisf11765/products/events/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct  6 03:31:38 2011] Size of ../../acisf11765/products/events/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_src.evt.gz[events] = 205 counts
[Thu Oct  6 03:31:38 2011] Mean chipx,y = (298.90, 574.46)
[Thu Oct  6 03:31:38 2011] Mean tdetx,y = (4557.54, 4405.90)
[Thu Oct  6 03:31:38 2011] chipx,y range = (280.00-320.00, 556.00-594.00)
[Thu Oct  6 03:31:38 2011] Size of ../../acisf11765/products/events/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 14 counts
[Thu Oct  6 03:31:38 2011] ../../acisf11765/products/images/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_src.img and ../../acisf11765/products/images/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct  6 03:31:38 2011] ../../acisf11765/products/spectra/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_src.pi and ../../acisf11765/products/spectra/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct  6 03:31:42 2011] ../../acisf11765/products/lightcurves/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_src.lc and ../../acisf11765/products/lightcurves/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct  6 03:31:58 2011] Keeping rmf generated by specextract
[Thu Oct  6 03:31:58 2011] 188.936
[Thu Oct  6 03:33:17 2011] Updating aperture counts using extracted products
[Thu Oct  6 03:33:17 2011] Error reading totcts from fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct  6 03:33:17 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:33:17 2011] Using photon index=1.80, rate=0.013, arf fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1.arf
[Thu Oct  6 03:33:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 03:33:17 2011] Updating source flux to 1.6e-13
[Thu Oct  6 03:33:24 2011] Reading fit data from acisf11765/analysis//spectral/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_pl.csv
[Thu Oct  6 03:33:24 2011] Spectral fit parameter nH value = 9.54713e+20
[Thu Oct  6 03:33:24 2011] Spectral fit parameter PhoIndex value = 2.20479
[Thu Oct  6 03:33:24 2011] Failed to get F(0.3-8.0) from acisf11765/analysis//spectral/fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 03:33:24 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:33:24 2011] Using Nh = 9.5e+20, photon index=2.20, rate=0.013, arf fullrun_ccd1_acisf11765_pi14-548_pass1_cl_src1.arf
[Thu Oct  6 03:33:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 03:33:24 2011] Updating source flux to 1.4e-13