[Sun Oct 30 05:48:36 2011] Detection parameters:
  Position = (381.4, 109.6) = 12 1 16.59 22 54 58.4
  Extent = 3.6" x 2.1", rotation angle = 142 degrees
  Source counts = 32.1 +/- 6.2
  Background counts = 5.9
  Rate = 0.005 +/- 0.0009

[Sun Oct 30 05:48:37 2011] Off-axis axis estimate = 9.78'
[Sun Oct 30 05:49:09 2011] Using EEF radius (= 4.23 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:49:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 05:49:09 2011] Initial guess for spatial extent in simple fitting = 4.23"
[Sun Oct 30 05:49:09 2011] source mask rpix=8.6, npix_max = 331, mask sum = 342, frac = 1.033
[Sun Oct 30 05:49:09 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.23"
[Sun Oct 30 05:49:09 2011] fullrun_ccd6_acisf11762_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 05:49:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11762_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:49:09 2011] fullrun_ccd6_acisf11762_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 05:49:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11762_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:49:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11762_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11762_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:49:09 2011] fullrun_ccd6_acisf11762_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 05:49:09 2011] fullrun_ccd6_acisf11762_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 05:49:09 2011] Fit fullrun_ccd6_acisf11762_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 05:49:13 2011] Spatial fit model total counts = 43.392400, observed total counts = 50.000000
[Sun Oct 30 05:49:13 2011] Offset between fit and detection position for source 1 = 0.845892 pixels
[Sun Oct 30 05:49:13 2011] 42.493700 total counts/ 36.340100 bgd. counts: snr = 1.020790
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.845892 pixels
  Position = (382.1, 109.1) = 12 1 16.58 22 54 57.9
  Extent = 1.5" x 1.5", rotation angle = 0
  Source counts = 6.2 +/- 6.5
  Background counts = 36.3
  Rate = 0.0009 +/- 0.0009
  Deleting source due to low Poisson probability