[Sat Feb 11 04:40:39 2012] Detection parameters:
  Position = (821.6, 626.9) = 4 17 45.18 -11 48 50.2
  Extent = 0.6" x 0.5", rotation angle = 9 degrees
  Source counts = 27.8 +/- 5.4
  Background counts = 1.2
  Rate = 0.0005 +/- 0.0001

[Sat Feb 11 04:40:40 2012] Off-axis axis estimate = 3.72'
[Sat Feb 11 05:26:45 2012] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 05:26:45 2012] Initial guess for spatial extent in simple fitting = 0.75"
[Sat Feb 11 05:26:45 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.978
[Sat Feb 11 05:26:45 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 0.75"
[Sat Feb 11 05:47:38 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src8.ximg exists
[Sat Feb 11 05:47:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src8.csv
[Sat Feb 11 05:47:38 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src8_1.ximg exists
[Sat Feb 11 05:47:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src8.csv
[Sat Feb 11 05:47:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 05:47:38 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sat Feb 11 05:47:39 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Feb 11 05:47:39 2012] Fit fullrun_ccd2_acisf11759_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Feb 11 06:42:57 2012] Spatial fit model total counts = 29.805200, observed total counts = 31.000000
[Sat Feb 11 06:42:57 2012] Offset between fit and detection position for source 12 = 0.750571 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.750571 pixels
  Position = (822.3, 627.4) = 4 17 45.17 -11 48 50.3
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 29.8 +/- 5.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Feb 11 06:42:57 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 06:42:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 06:42:57 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 06:42:57 2012] Source does appear to be extended
[Sat Feb 11 06:42:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 07:12:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 07:12:36 2012] Initial guess for spatial extent in simple fitting = 0.80"
[Sat Feb 11 07:12:36 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.104
[Sat Feb 11 07:12:36 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 0.80"
[Sat Feb 11 07:33:24 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src8.ximg exists
[Sat Feb 11 07:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src8.csv
[Sat Feb 11 07:33:24 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src8_1.ximg exists
[Sat Feb 11 07:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src8.csv
[Sat Feb 11 07:33:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 07:33:24 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sat Feb 11 07:33:24 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Feb 11 07:33:24 2012] Fit fullrun_ccd2_acisf11759_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Feb 11 08:23:32 2012] Spatial fit model total counts = 28.465300, observed total counts = 31.000000
[Sat Feb 11 08:23:32 2012] Offset between fit and detection position for source 12 = 0.029099 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.029099 pixels
  Position = (822.2, 627.4) = 4 17 45.17 -11 48 50.3
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 28.6 +/- 5.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Feb 11 08:23:32 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 08:23:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 08:23:32 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 08:23:32 2012] Source does appear to be extended
[Sat Feb 11 08:23:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 08:34:03 2012] Writing source region out to fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src12_src.reg
[Sat Feb 11 08:34:03 2012] Extracting stamp from image fullrun_ccd2_acisf11759_pi14-548_cl_sm2.00.img.gz, (788, 593) - (857, 662)
[Sat Feb 11 08:34:03 2012] Writing fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src12.gif
[Sat Feb 11 08:38:34 2012] Size of ../../acisf11759/products/events/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src12_src.evt.gz[events] = 31 counts
[Sat Feb 11 08:38:34 2012] Mean chipx,y = (530.13, 641.42)
[Sat Feb 11 08:38:34 2012] Mean tdetx,y = (3702.42, 3555.87)
[Sat Feb 11 08:38:34 2012] chipx,y range = (510.00-543.00, 624.00-658.00)
[Sat Feb 11 08:38:34 2012] Size of ../../acisf11759/products/events/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 28 counts
[Sat Feb 11 08:38:35 2012] Not generating rmf since there are only 28 counts
[Sat Feb 11 08:38:35 2012] arf not found, will run specextract
[Sat Feb 11 08:39:09 2012] ../../acisf11759/products/spectra/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src12.warf not found
[Sat Feb 11 08:39:09 2012] ../../acisf11759/products/spectra/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src12.wrmf not found
[Sat Feb 11 08:39:09 2012] Removal of ../../acisf11759/products/spectra/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src12.soff failed
[Sat Feb 11 08:55:58 2012] Spectrum 12 has only 29 counts, deleting rmf
[Sat Feb 11 08:55:58 2012] 164.741
[Sat Feb 11 09:11:56 2012] Updating aperture counts using extracted products
[Sat Feb 11 09:11:56 2012] Error reading totcts from fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src12_src.pi.gz
[Sat Feb 11 09:11:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 09:11:56 2012] Using photon index=1.80, rate=0.000557, arf fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src12.arf
[Sat Feb 11 09:11:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 11 09:11:56 2012] Updating source flux to 7.8e-15
[Sat Feb 11 09:12:08 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting