[Sat Feb 11 04:40:38 2012] Detection parameters:
  Position = (862.4, 1198.9) = 4 17 43.81 -11 44 8.9
  Extent = 3.6" x 2.2", rotation angle = 155 degrees
  Source counts = 135.2 +/- 12.8
  Background counts = 27.8
  Rate = 0.003 +/- 0.0002

[Sat Feb 11 04:40:40 2012] Off-axis axis estimate = 8.34'
[Sat Feb 11 05:26:45 2012] Using EEF radius (= 3.07 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 05:26:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 11 05:26:45 2012] Initial guess for spatial extent in simple fitting = 3.07"
[Sat Feb 11 05:26:45 2012] source mask rpix=6.2, npix_max = 182, mask sum = 182, frac = 0.999
[Sat Feb 11 05:26:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.07"
[Sat Feb 11 05:47:38 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src1.ximg exists
[Sat Feb 11 05:47:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src1.csv
[Sat Feb 11 05:47:38 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Feb 11 05:47:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src1.csv
[Sat Feb 11 05:47:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11759_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 05:47:38 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Feb 11 05:47:38 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Feb 11 05:47:38 2012] Fit fullrun_ccd2_acisf11759_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Feb 11 06:42:57 2012] Spatial fit model total counts = 180.180000, observed total counts = 181.000000
[Sat Feb 11 06:42:57 2012] Offset between fit and detection position for source 1 = 0.580256 pixels
[Sat Feb 11 06:42:57 2012] 180.437800 total counts/ 63.914800 bgd. counts: snr = 14.575080
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.580256 pixels
  Position = (862.4, 1199.4) = 4 17 43.83 -11 44 8.8
  Extent = 2.2 (1.9-2.6)", rotation angle = 0
  Source counts = 116.5 +/- 13.4
  Background counts = 63.9
  Rate = 0.002 +/- 0.0003
[Sat Feb 11 06:42:57 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 06:42:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 06:42:57 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 06:42:57 2012] Source does appear to be extended
[Sat Feb 11 06:42:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 07:12:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 07:12:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 11 07:12:36 2012] Initial guess for spatial extent in simple fitting = 2.23"
[Sat Feb 11 07:12:36 2012] source mask rpix=4.5, npix_max = 101, mask sum = 100, frac = 0.983
[Sat Feb 11 07:12:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.23"
[Sat Feb 11 07:33:24 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src1.ximg exists
[Sat Feb 11 07:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src1.csv
[Sat Feb 11 07:33:24 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Feb 11 07:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src1.csv
[Sat Feb 11 07:33:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11759_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 07:33:24 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Feb 11 07:33:24 2012] fullrun_ccd2_acisf11759_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Feb 11 07:33:24 2012] Fit fullrun_ccd2_acisf11759_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Feb 11 08:23:32 2012] Spatial fit model total counts = 158.170000, observed total counts = 159.000000
[Sat Feb 11 08:23:32 2012] Offset between fit and detection position for source 1 = 0.272734 pixels
[Sat Feb 11 08:23:32 2012] 158.830900 total counts/ 53.221900 bgd. counts: snr = 14.476239
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.272734 pixels
  Position = (862.4, 1199.2) = 4 17 43.83 -11 44 9.0
  Extent = 2.0 (1.7-2.4)", rotation angle = 0
  Source counts = 105.6 +/- 12.6
  Background counts = 53.2
  Rate = 0.002 +/- 0.0002
[Sat Feb 11 08:23:32 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 08:23:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 08:23:32 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 08:23:32 2012] Source does appear to be extended
[Sat Feb 11 08:23:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 08:34:02 2012] Writing source region out to fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1_src.reg
[Sat Feb 11 08:34:02 2012] Extracting stamp from image fullrun_ccd2_acisf11759_pi14-548_cl_sm2.00.img.gz, (769, 1106) - (956, 1293)
[Sat Feb 11 08:34:02 2012] Writing fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1.gif
[Sat Feb 11 08:34:05 2012] Size of ../../acisf11759/products/events/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1_src.evt.gz[events] = 145 counts
[Sat Feb 11 08:34:05 2012] Mean chipx,y = (915.59, 217.35)
[Sat Feb 11 08:34:05 2012] Mean tdetx,y = (3278.35, 3170.41)
[Sat Feb 11 08:34:05 2012] chipx,y range = (894.00-946.00, 188.00-242.00)
[Sat Feb 11 08:34:05 2012] Size of ../../acisf11759/products/events/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 157 counts
[Sat Feb 11 08:34:06 2012] rmf not found, will run specextract
[Sat Feb 11 08:34:06 2012] arf not found, will run specextract
[Sat Feb 11 08:34:29 2012] ../../acisf11759/products/spectra/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1.warf not found
[Sat Feb 11 08:34:29 2012] ../../acisf11759/products/spectra/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1.wrmf not found
[Sat Feb 11 08:34:29 2012] Removal of ../../acisf11759/products/spectra/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1.soff failed
[Sat Feb 11 08:55:58 2012] Keeping rmf generated by specextract
[Sat Feb 11 08:55:58 2012] 155.419
[Sat Feb 11 09:11:56 2012] Updating aperture counts using extracted products
[Sat Feb 11 09:11:56 2012] Error reading totcts from fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Feb 11 09:11:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 09:11:56 2012] Using photon index=1.80, rate=0.00206, arf fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1.arf
[Sat Feb 11 09:11:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 11 09:11:56 2012] Updating source flux to 3.2e-14
[Sat Feb 11 09:12:19 2012] Reading fit data from acisf11759/analysis//spectral/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1_pl.csv
[Sat Feb 11 09:12:19 2012] Spectral fit parameter nH value = 9.2831e+12
[Sat Feb 11 09:12:19 2012] Spectral fit parameter PhoIndex value = 1.54655
[Sat Feb 11 09:12:19 2012] Failed to get F(0.3-8.0) from acisf11759/analysis//spectral/fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Feb 11 09:12:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 09:12:19 2012] Using Nh = 9.3e+12, photon index=1.55, rate=0.00206, arf fullrun_ccd2_acisf11759_pi14-548_pass1_cl_src1.arf
[Sat Feb 11 09:12:19 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 11 09:12:19 2012] Updating source flux to 3.4e-14