[Thu Oct  6 08:22:12 2011] Detection parameters:
  Position = (727.2, 503.1) = 23 14 20.93 -42 40 36.1
  Extent = 0.5" x 0.5", rotation angle = 111 degrees
  Source counts = 50.5 +/- 7.5
  Background counts = 5.5
  Rate = 0.0005 +/- 8e-05

[Thu Oct  6 08:22:15 2011] Off-axis axis estimate = 3.52'
[Thu Oct  6 08:24:59 2011] Using EEF radius (= 0.70 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:24:59 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Thu Oct  6 08:24:59 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.089
[Thu Oct  6 08:24:59 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.70"
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src11.ximg exists
[Thu Oct  6 08:25:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src11.csv
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src11_1.ximg exists
[Thu Oct  6 08:25:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src11.csv
[Thu Oct  6 08:25:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Oct  6 08:25:00 2011] Fit fullrun_ccd2_acisf11758_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Oct  6 08:25:22 2011] Spatial fit model total counts = 71.900600, observed total counts = 72.000000
[Thu Oct  6 08:25:22 2011] Offset between fit and detection position for source 9 = 0.578980 pixels
[Thu Oct  6 08:25:22 2011] 72.807400 total counts/ 23.803600 bgd. counts: snr = 10.044040
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.578980 pixels
  Position = (727.6, 503.5) = 23 14 20.94 -42 40 36.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 49.0 +/- 8.5
  Background counts = 23.8
  Rate = 0.0005 +/- 9e-05
[Thu Oct  6 08:25:22 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:25:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:25:22 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:25:22 2011] Source does appear to be extended
[Thu Oct  6 08:25:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:25:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:25:53 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Thu Oct  6 08:25:53 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.801
[Thu Oct  6 08:25:53 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.58"
[Thu Oct  6 08:25:54 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src11.ximg exists
[Thu Oct  6 08:25:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src11.csv
[Thu Oct  6 08:25:54 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src11_1.ximg exists
[Thu Oct  6 08:25:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src11.csv
[Thu Oct  6 08:25:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:25:55 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Thu Oct  6 08:25:55 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Oct  6 08:25:55 2011] Fit fullrun_ccd2_acisf11758_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Oct  6 08:26:10 2011] Spatial fit model total counts = 73.911000, observed total counts = 74.000000
[Thu Oct  6 08:26:10 2011] Offset between fit and detection position for source 9 = 0.036712 pixels
[Thu Oct  6 08:26:10 2011] 74.591600 total counts/ 25.965300 bgd. counts: snr = 9.542772
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.036712 pixels
  Position = (727.7, 503.5) = 23 14 20.93 -42 40 36.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 48.6 +/- 8.6
  Background counts = 26.0
  Rate = 0.0005 +/- 9e-05
[Thu Oct  6 08:26:10 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:26:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:26:10 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:26:10 2011] Source does appear to be extended
[Thu Oct  6 08:26:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:30:10 2011] Not overwriting source region fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_src.reg
[Thu Oct  6 08:30:10 2011] Extracting stamp from image fullrun_ccd2_acisf11758_pi14-548_cl_sm2.00.img.gz, (702, 478) - (753, 529)
[Thu Oct  6 08:30:10 2011] Writing fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9.gif
[Thu Oct  6 08:30:47 2011] ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_src.evt and ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Thu Oct  6 08:30:47 2011] Size of ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_src.evt.gz[events] = 55 counts
[Thu Oct  6 08:30:47 2011] Mean chipx,y = (350.98, 633.25)
[Thu Oct  6 08:30:47 2011] Mean tdetx,y = (3694.25, 3735.02)
[Thu Oct  6 08:30:47 2011] chipx,y range = (332.00-367.00, 611.00-652.00)
[Thu Oct  6 08:30:47 2011] Size of ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 41 counts
[Thu Oct  6 08:30:47 2011] ../../acisf11758/products/images/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_src.img and ../../acisf11758/products/images/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Thu Oct  6 08:30:47 2011] ../../acisf11758/products/spectra/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_src.pi and ../../acisf11758/products/spectra/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Thu Oct  6 08:30:47 2011] Not generating rmf since there are only 48 counts
[Thu Oct  6 08:30:50 2011] ../../acisf11758/products/lightcurves/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_src.lc and ../../acisf11758/products/lightcurves/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Thu Oct  6 08:32:44 2011] 190.828
[Thu Oct  6 08:33:59 2011] Updating aperture counts using extracted products
[Thu Oct  6 08:33:59 2011] Error reading totcts from fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9_src.pi.gz
[Thu Oct  6 08:33:59 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 08:33:59 2011] Using photon index=1.80, rate=0.000498, arf fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src9.arf
[Thu Oct  6 08:33:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 08:33:59 2011] Updating source flux to 6.2e-15
[Thu Oct  6 08:34:30 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting