[Thu Oct  6 08:22:11 2011] Detection parameters:
  Position = (1014.5, 743.5) = 23 14 8.11 -42 38 37.8
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 91.7 +/- 9.9
  Background counts = 7.3
  Rate = 0.0009 +/- 0.0001

[Thu Oct  6 08:22:15 2011] Off-axis axis estimate = 4.34'
[Thu Oct  6 08:24:59 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:24:59 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Thu Oct  6 08:24:59 2011] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.036
[Thu Oct  6 08:24:59 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.94"
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src6.ximg exists
[Thu Oct  6 08:25:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src6.csv
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src6_1.ximg exists
[Thu Oct  6 08:25:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src6.csv
[Thu Oct  6 08:25:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Oct  6 08:25:00 2011] Fit fullrun_ccd2_acisf11758_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Oct  6 08:25:22 2011] Spatial fit model total counts = 119.568000, observed total counts = 120.000000
[Thu Oct  6 08:25:22 2011] Offset between fit and detection position for source 3 = 1.027427 pixels
[Thu Oct  6 08:25:22 2011] 121.126500 total counts/ 22.127300 bgd. counts: snr = 21.045899
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.027427 pixels
  Position = (1015.0, 744.4) = 23 14 8.11 -42 38 37.6
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 99.0 +/- 11.0
  Background counts = 22.1
  Rate = 0.001 +/- 0.0001
[Thu Oct  6 08:25:22 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:25:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:25:22 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:25:22 2011] Source does appear to be extended
[Thu Oct  6 08:25:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:25:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:25:53 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Thu Oct  6 08:25:53 2011] source mask rpix=1.5, npix_max = 15, mask sum = 15, frac = 0.969
[Thu Oct  6 08:25:53 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.72"
[Thu Oct  6 08:25:54 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src6.ximg exists
[Thu Oct  6 08:25:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src6.csv
[Thu Oct  6 08:25:54 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src6_1.ximg exists
[Thu Oct  6 08:25:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src6.csv
[Thu Oct  6 08:25:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:25:54 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Thu Oct  6 08:25:54 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Oct  6 08:25:54 2011] Fit fullrun_ccd2_acisf11758_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Oct  6 08:26:10 2011] Spatial fit model total counts = 122.273000, observed total counts = 122.000000
[Thu Oct  6 08:26:10 2011] Offset between fit and detection position for source 3 = 0.012924 pixels
[Thu Oct  6 08:26:10 2011] 123.822600 total counts/ 24.249600 bgd. counts: snr = 20.220380
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.012924 pixels
  Position = (1015.0, 744.4) = 23 14 8.11 -42 38 37.6
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 99.6 +/- 11.1
  Background counts = 24.2
  Rate = 0.001 +/- 0.0001
[Thu Oct  6 08:26:10 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:26:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:26:10 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:26:10 2011] Source does appear to be extended
[Thu Oct  6 08:26:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:30:10 2011] Not overwriting source region fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_src.reg
[Thu Oct  6 08:30:10 2011] Extracting stamp from image fullrun_ccd2_acisf11758_pi14-548_cl_sm2.00.img.gz, (982, 712) - (1048, 777)
[Thu Oct  6 08:30:10 2011] Writing fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3.gif
[Thu Oct  6 08:30:29 2011] ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_src.evt and ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Oct  6 08:30:29 2011] Size of ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_src.evt.gz[events] = 111 counts
[Thu Oct  6 08:30:29 2011] Mean chipx,y = (696.79, 772.67)
[Thu Oct  6 08:30:29 2011] Mean tdetx,y = (3833.67, 3389.21)
[Thu Oct  6 08:30:29 2011] chipx,y range = (680.00-718.00, 752.00-791.00)
[Thu Oct  6 08:30:29 2011] Size of ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 50 counts
[Thu Oct  6 08:30:29 2011] ../../acisf11758/products/images/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_src.img and ../../acisf11758/products/images/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Oct  6 08:30:29 2011] ../../acisf11758/products/spectra/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_src.pi and ../../acisf11758/products/spectra/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Oct  6 08:30:29 2011] Not generating rmf since there are only 99 counts
[Thu Oct  6 08:30:33 2011] ../../acisf11758/products/lightcurves/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_src.lc and ../../acisf11758/products/lightcurves/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Oct  6 08:32:43 2011] 180.07
[Thu Oct  6 08:33:59 2011] Updating aperture counts using extracted products
[Thu Oct  6 08:33:59 2011] Error reading totcts from fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Oct  6 08:33:59 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 08:33:59 2011] Using photon index=1.80, rate=0.00102, arf fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src3.arf
[Thu Oct  6 08:33:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 08:33:59 2011] Updating source flux to 1.4e-14
[Thu Oct  6 08:34:30 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting