[Thu Oct  6 08:22:12 2011] Detection parameters:
  Position = (1054.2, 650.6) = 23 14 6.34 -42 39 23.6
  Extent = 0.7" x 0.6", rotation angle = 124 degrees
  Source counts = 56.5 +/- 7.9
  Background counts = 6.5
  Rate = 0.0006 +/- 8e-05

[Thu Oct  6 08:22:15 2011] Off-axis axis estimate = 3.57'
[Thu Oct  6 08:24:59 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:24:59 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Thu Oct  6 08:24:59 2011] source mask rpix=1.4, npix_max = 15, mask sum = 14, frac = 0.925
[Thu Oct  6 08:24:59 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.71"
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src10.ximg exists
[Thu Oct  6 08:25:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src10.csv
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src10_1.ximg exists
[Thu Oct  6 08:25:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src10.csv
[Thu Oct  6 08:25:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11758_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Thu Oct  6 08:25:00 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Oct  6 08:25:00 2011] Fit fullrun_ccd2_acisf11758_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Oct  6 08:25:22 2011] Spatial fit model total counts = 83.913000, observed total counts = 80.000000
[Thu Oct  6 08:25:22 2011] Offset between fit and detection position for source 10 = 0.533422 pixels
[Thu Oct  6 08:25:22 2011] 83.220900 total counts/ 22.946400 bgd. counts: snr = 12.582772
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.533422 pixels
  Position = (1054.7, 650.8) = 23 14 6.34 -42 39 23.7
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 60.3 +/- 9.1
  Background counts = 22.9
  Rate = 0.0006 +/- 9e-05
[Thu Oct  6 08:25:22 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:25:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:25:22 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:25:22 2011] Source does appear to be extended
[Thu Oct  6 08:25:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:25:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:25:53 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Thu Oct  6 08:25:53 2011] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.801
[Thu Oct  6 08:25:53 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.82"
[Thu Oct  6 08:25:54 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src10.ximg exists
[Thu Oct  6 08:25:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src10.csv
[Thu Oct  6 08:25:54 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src10_1.ximg exists
[Thu Oct  6 08:25:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src10.csv
[Thu Oct  6 08:25:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11758_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:25:55 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Thu Oct  6 08:25:55 2011] fullrun_ccd2_acisf11758_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Oct  6 08:25:55 2011] Fit fullrun_ccd2_acisf11758_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Oct  6 08:26:10 2011] Spatial fit model total counts = 83.935900, observed total counts = 80.000000
[Thu Oct  6 08:26:10 2011] Offset between fit and detection position for source 10 = 0.001003 pixels
[Thu Oct  6 08:26:10 2011] 83.244000 total counts/ 23.012200 bgd. counts: snr = 12.555869
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.001003 pixels
  Position = (1054.7, 650.8) = 23 14 6.34 -42 39 23.7
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 60.2 +/- 9.1
  Background counts = 23.0
  Rate = 0.0006 +/- 9e-05
[Thu Oct  6 08:26:10 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:26:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:26:10 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:26:10 2011] Source does appear to be extended
[Thu Oct  6 08:26:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:30:10 2011] Not overwriting source region fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_src.reg
[Thu Oct  6 08:30:10 2011] Extracting stamp from image fullrun_ccd2_acisf11758_pi14-548_cl_sm2.00.img.gz, (1017, 613) - (1092, 688)
[Thu Oct  6 08:30:10 2011] Writing fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10.gif
[Thu Oct  6 08:30:44 2011] ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_src.evt and ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Thu Oct  6 08:30:44 2011] Size of ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_src.evt.gz[events] = 67 counts
[Thu Oct  6 08:30:44 2011] Mean chipx,y = (634.22, 850.63)
[Thu Oct  6 08:30:44 2011] Mean tdetx,y = (3911.63, 3451.78)
[Thu Oct  6 08:30:44 2011] chipx,y range = (612.00-653.00, 833.00-872.00)
[Thu Oct  6 08:30:44 2011] Size of ../../acisf11758/products/events/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 109 counts
[Thu Oct  6 08:30:44 2011] ../../acisf11758/products/images/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_src.img and ../../acisf11758/products/images/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Thu Oct  6 08:30:44 2011] ../../acisf11758/products/spectra/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_src.pi and ../../acisf11758/products/spectra/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Thu Oct  6 08:30:44 2011] Not generating rmf since there are only 60 counts
[Thu Oct  6 08:30:47 2011] ../../acisf11758/products/lightcurves/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_src.lc and ../../acisf11758/products/lightcurves/fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Thu Oct  6 08:32:44 2011] 183.376
[Thu Oct  6 08:33:59 2011] Updating aperture counts using extracted products
[Thu Oct  6 08:33:59 2011] Error reading totcts from fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10_src.pi.gz
[Thu Oct  6 08:33:59 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 08:33:59 2011] Using photon index=1.80, rate=0.000616, arf fullrun_ccd2_acisf11758_pi14-548_pass1_cl_src10.arf
[Thu Oct  6 08:33:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 08:33:59 2011] Updating source flux to 8e-15
[Thu Oct  6 08:34:30 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting