[Thu Oct  6 08:22:09 2011] Detection parameters:
  Position = (345.5, 665.4) = 23 14 18.90 -42 50 43.1
  Extent = 0.8" x 0.6", rotation angle = 66 degrees
  Source counts = 186.6 +/- 15.0
  Background counts = 38.4
  Rate = 0.002 +/- 0.0002

[Thu Oct  6 08:22:11 2011] Off-axis axis estimate = 8.07'
[Thu Oct  6 08:24:57 2011] Using EEF radius (= 2.88 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:24:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 08:24:57 2011] Initial guess for spatial extent in simple fitting = 2.88"
[Thu Oct  6 08:24:57 2011] source mask rpix=5.8, npix_max = 161, mask sum = 157, frac = 0.974
[Thu Oct  6 08:24:57 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.88"
[Thu Oct  6 08:24:58 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src2.ximg exists
[Thu Oct  6 08:24:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src2.csv
[Thu Oct  6 08:24:58 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Oct  6 08:24:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src2.csv
[Thu Oct  6 08:24:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:24:59 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Oct  6 08:24:59 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Oct  6 08:24:59 2011] Fit fullrun_ccd1_acisf11758_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Oct  6 08:25:18 2011] Spatial fit model total counts = 302.773000, observed total counts = 293.000000
[Thu Oct  6 08:25:18 2011] Offset between fit and detection position for source 5 = 0.314894 pixels
[Thu Oct  6 08:25:18 2011] 303.413700 total counts/ 62.821700 bgd. counts: snr = 30.354728
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.314894 pixels
  Position = (345.2, 665.4) = 23 14 18.94 -42 50 43.3
  Extent = 2.5 (2.3-2.9)", rotation angle = 0
  Source counts = 240.6 +/- 17.4
  Background counts = 62.8
  Rate = 0.002 +/- 0.0002
[Thu Oct  6 08:25:18 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:25:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:25:18 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:25:18 2011] Source does appear to be extended
[Thu Oct  6 08:25:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:25:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:25:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 08:25:51 2011] Initial guess for spatial extent in simple fitting = 2.54"
[Thu Oct  6 08:25:51 2011] source mask rpix=5.2, npix_max = 128, mask sum = 112, frac = 0.874
[Thu Oct  6 08:25:51 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.54"
[Thu Oct  6 08:25:52 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src2.ximg exists
[Thu Oct  6 08:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src2.csv
[Thu Oct  6 08:25:52 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Oct  6 08:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src2.csv
[Thu Oct  6 08:25:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:25:53 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Oct  6 08:25:53 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Oct  6 08:25:53 2011] Fit fullrun_ccd1_acisf11758_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Oct  6 08:26:07 2011] Spatial fit model total counts = 284.184000, observed total counts = 278.000000
[Thu Oct  6 08:26:07 2011] Offset between fit and detection position for source 5 = 0.270793 pixels
[Thu Oct  6 08:26:07 2011] 284.824900 total counts/ 63.328900 bgd. counts: snr = 27.833314
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.270793 pixels
  Position = (344.9, 665.5) = 23 14 18.95 -42 50 43.3
  Extent = 2.4 (2.1-2.9)", rotation angle = 0
  Source counts = 221.5 +/- 16.9
  Background counts = 63.3
  Rate = 0.002 +/- 0.0002
[Thu Oct  6 08:26:07 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:26:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:26:07 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:26:07 2011] Source does appear to be extended
[Thu Oct  6 08:26:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:28:17 2011] Not overwriting source region fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_src.reg
[Thu Oct  6 08:28:17 2011] Extracting stamp from image fullrun_ccd1_acisf11758_pi14-548_cl_sm2.00.img.gz, (233, 554) - (456, 777)
[Thu Oct  6 08:28:17 2011] Writing fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5.gif
[Thu Oct  6 08:28:25 2011] ../../acisf11758/products/events/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_src.evt and ../../acisf11758/products/events/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu Oct  6 08:28:25 2011] Size of ../../acisf11758/products/events/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_src.evt.gz[events] = 291 counts
[Thu Oct  6 08:28:25 2011] Mean chipx,y = (699.05, 816.37)
[Thu Oct  6 08:28:25 2011] Mean tdetx,y = (4315.63, 4806.05)
[Thu Oct  6 08:28:25 2011] chipx,y range = (669.00-732.00, 784.00-854.00)
[Thu Oct  6 08:28:26 2011] Size of ../../acisf11758/products/events/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 559 counts
[Thu Oct  6 08:28:26 2011] ../../acisf11758/products/images/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_src.img and ../../acisf11758/products/images/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu Oct  6 08:28:26 2011] ../../acisf11758/products/spectra/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_src.pi and ../../acisf11758/products/spectra/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu Oct  6 08:28:33 2011] ../../acisf11758/products/lightcurves/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_src.lc and ../../acisf11758/products/lightcurves/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu Oct  6 08:30:09 2011] Keeping rmf generated by specextract
[Thu Oct  6 08:30:09 2011] 167.285
[Thu Oct  6 08:33:58 2011] Updating aperture counts using extracted products
[Thu Oct  6 08:33:58 2011] Error reading totcts from fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_src.pi.gz
[Thu Oct  6 08:33:58 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 08:33:58 2011] Using photon index=1.80, rate=0.00227, arf fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5.arf
[Thu Oct  6 08:33:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 08:33:58 2011] Updating source flux to 3.2e-14
[Thu Oct  6 08:34:30 2011] Reading fit data from acisf11758/analysis//spectral/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_pl.csv
[Thu Oct  6 08:34:30 2011] Spectral fit parameter nH value = 1.42731e+21
[Thu Oct  6 08:34:30 2011] Spectral fit parameter PhoIndex value = 2.28301
[Thu Oct  6 08:34:30 2011] Failed to get F(0.3-8.0) from acisf11758/analysis//spectral/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 08:34:30 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 08:34:30 2011] Using Nh = 1.4e+21, photon index=2.28, rate=0.00227, arf fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src5.arf
[Thu Oct  6 08:34:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 08:34:30 2011] Updating source flux to 2.6e-14