[Thu Oct  6 08:22:09 2011] Detection parameters:
  Position = (828.4, 1151.5) = 23 13 57.30 -42 46 43.9
  Extent = 0.6" x 0.5", rotation angle = 82 degrees
  Source counts = 85.0 +/- 9.8
  Background counts = 12.0
  Rate = 0.0009 +/- 0.0001

[Thu Oct  6 08:22:11 2011] Off-axis axis estimate = 4.15'
[Thu Oct  6 08:24:57 2011] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:24:57 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Thu Oct  6 08:24:57 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.203
[Thu Oct  6 08:24:57 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.88"
[Thu Oct  6 08:24:58 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src8.ximg exists
[Thu Oct  6 08:24:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src8.csv
[Thu Oct  6 08:24:58 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src8_1.ximg exists
[Thu Oct  6 08:24:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src8.csv
[Thu Oct  6 08:24:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11758_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:24:59 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Thu Oct  6 08:24:59 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Oct  6 08:24:59 2011] Fit fullrun_ccd1_acisf11758_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Oct  6 08:25:18 2011] Spatial fit model total counts = 101.743000, observed total counts = 102.000000
[Thu Oct  6 08:25:18 2011] Offset between fit and detection position for source 10 = 0.653286 pixels
[Thu Oct  6 08:25:18 2011] 100.520100 total counts/ 15.764200 bgd. counts: snr = 21.346859
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.653286 pixels
  Position = (829.0, 1151.8) = 23 13 57.30 -42 46 44.0
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 84.8 +/- 10.0
  Background counts = 15.8
  Rate = 0.0009 +/- 0.0001
[Thu Oct  6 08:25:18 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:25:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:25:18 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:25:18 2011] Source does appear to be extended
[Thu Oct  6 08:25:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:25:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:25:51 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Thu Oct  6 08:25:51 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.816
[Thu Oct  6 08:25:51 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.84"
[Thu Oct  6 08:25:52 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src8.ximg exists
[Thu Oct  6 08:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src8.csv
[Thu Oct  6 08:25:52 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src8_1.ximg exists
[Thu Oct  6 08:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src8.csv
[Thu Oct  6 08:25:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11758_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:25:53 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Thu Oct  6 08:25:53 2011] fullrun_ccd1_acisf11758_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Oct  6 08:25:53 2011] Fit fullrun_ccd1_acisf11758_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Oct  6 08:26:07 2011] Spatial fit model total counts = 99.997900, observed total counts = 100.000000
[Thu Oct  6 08:26:07 2011] Offset between fit and detection position for source 10 = 0.026652 pixels
[Thu Oct  6 08:26:07 2011] 99.176500 total counts/ 14.390200 bgd. counts: snr = 22.350759
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.026652 pixels
  Position = (829.0, 1151.8) = 23 13 57.30 -42 46 44.0
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 84.8 +/- 10.0
  Background counts = 14.4
  Rate = 0.0009 +/- 0.0001
[Thu Oct  6 08:26:07 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:26:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:26:07 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:26:07 2011] Source does appear to be extended
[Thu Oct  6 08:26:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:28:17 2011] Not overwriting source region fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_src.reg
[Thu Oct  6 08:28:17 2011] Extracting stamp from image fullrun_ccd1_acisf11758_pi14-548_cl_sm2.00.img.gz, (791, 1114) - (867, 1190)
[Thu Oct  6 08:28:17 2011] Writing fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10.gif
[Thu Oct  6 08:28:56 2011] ../../acisf11758/products/events/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_src.evt and ../../acisf11758/products/events/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Thu Oct  6 08:28:56 2011] Size of ../../acisf11758/products/events/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_src.evt.gz[events] = 94 counts
[Thu Oct  6 08:28:56 2011] Mean chipx,y = (40.34, 617.80)
[Thu Oct  6 08:28:56 2011] Mean tdetx,y = (4514.20, 4147.34)
[Thu Oct  6 08:28:56 2011] chipx,y range = (23.00-63.00, 599.00-637.00)
[Thu Oct  6 08:28:56 2011] Size of ../../acisf11758/products/events/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 157 counts
[Thu Oct  6 08:28:56 2011] ../../acisf11758/products/images/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_src.img and ../../acisf11758/products/images/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Thu Oct  6 08:28:56 2011] ../../acisf11758/products/spectra/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_src.pi and ../../acisf11758/products/spectra/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Thu Oct  6 08:28:56 2011] Not generating rmf since there are only 84 counts
[Thu Oct  6 08:29:00 2011] ../../acisf11758/products/lightcurves/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_src.lc and ../../acisf11758/products/lightcurves/fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Thu Oct  6 08:30:09 2011] 183.639
[Thu Oct  6 08:33:58 2011] Updating aperture counts using extracted products
[Thu Oct  6 08:33:58 2011] Error reading totcts from fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10_src.pi.gz
[Thu Oct  6 08:33:58 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 08:33:58 2011] Using photon index=1.80, rate=0.000868, arf fullrun_ccd1_acisf11758_pi14-548_pass1_cl_src10.arf
[Thu Oct  6 08:33:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 08:33:58 2011] Updating source flux to 1.1e-14
[Thu Oct  6 08:34:18 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting