[Thu Oct  6 08:22:08 2011] Detection parameters:
  Position = (312.7, 1034.8) = 23 15 0.97 -42 43 41.4
  Extent = 0.6" x 0.5", rotation angle = 50 degrees
  Source counts = 44.0 +/- 9.1
  Background counts = 39.0
  Rate = 0.0004 +/- 9e-05

[Thu Oct  6 08:22:09 2011] Off-axis axis estimate = 9.98'
[Thu Oct  6 08:24:55 2011] Using EEF radius (= 4.42 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:24:55 2011] Initial guess for spatial extent in simple fitting = 4.42"
[Thu Oct  6 08:24:55 2011] source mask rpix=9.0, npix_max = 359, mask sum = 342, frac = 0.952
[Thu Oct  6 08:24:55 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 4.42"
[Thu Oct  6 08:24:57 2011] fullrun_ccd0_acisf11758_pi14-548_cl_pass0_src21.ximg exists
[Thu Oct  6 08:24:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11758_pi14-548_cl_pass0_src21.csv
[Thu Oct  6 08:24:57 2011] fullrun_ccd0_acisf11758_pi14-548_cl_pass0_src21_1.ximg exists
[Thu Oct  6 08:24:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11758_pi14-548_cl_pass0_src21.csv
[Thu Oct  6 08:24:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11758_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11758_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:24:57 2011] fullrun_ccd0_acisf11758_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Thu Oct  6 08:24:57 2011] fullrun_ccd0_acisf11758_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Oct  6 08:24:57 2011] Fit fullrun_ccd0_acisf11758_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Oct  6 08:25:14 2011] Spatial fit model total counts = 170.541000, observed total counts = 167.000000
[Thu Oct  6 08:25:14 2011] Offset between fit and detection position for source 28 = 5.493873 pixels
[Thu Oct  6 08:25:14 2011] 171.902100 total counts/ 107.892000 bgd. counts: snr = 6.162457
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 5.493873 pixels
  Position = (313.5, 1029.4) = 23 15 0.96 -42 43 44.3
  Extent = 4.1 (3.3-5.2)", rotation angle = 0
  Source counts = 64.0 +/- 13.1
  Background counts = 107.9
  Rate = 0.0007 +/- 0.0001
[Thu Oct  6 08:25:14 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:25:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:25:14 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:25:14 2011] Source does appear to be extended
[Thu Oct  6 08:25:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:25:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:25:50 2011] Initial guess for spatial extent in simple fitting = 4.06"
[Thu Oct  6 08:25:50 2011] source mask rpix=8.2, npix_max = 305, mask sum = 283, frac = 0.925
[Thu Oct  6 08:25:50 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 4.06"
[Thu Oct  6 08:25:51 2011] fullrun_ccd0_acisf11758_pi14-548_cl_pass1_src20.ximg exists
[Thu Oct  6 08:25:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11758_pi14-548_cl_pass1_src20.csv
[Thu Oct  6 08:25:51 2011] fullrun_ccd0_acisf11758_pi14-548_cl_pass1_src20_1.ximg exists
[Thu Oct  6 08:25:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11758_pi14-548_cl_pass1_src20.csv
[Thu Oct  6 08:25:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11758_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11758_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:25:51 2011] fullrun_ccd0_acisf11758_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Thu Oct  6 08:25:51 2011] fullrun_ccd0_acisf11758_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Oct  6 08:25:51 2011] Fit fullrun_ccd0_acisf11758_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Thu Oct  6 08:26:03 2011] Spatial fit model total counts = 138.470000, observed total counts = 148.000000
[Thu Oct  6 08:26:03 2011] Offset between fit and detection position for source 28 = 0.954224 pixels
[Thu Oct  6 08:26:03 2011] 139.155800 total counts/ 67.776100 bgd. counts: snr = 8.670346
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.954224 pixels
  Position = (313.2, 1030.3) = 23 15 0.97 -42 43 43.9
  Extent = 4.2 (3.5-5.4)", rotation angle = 0
  Source counts = 71.4 +/- 11.8
  Background counts = 67.8
  Rate = 0.0007 +/- 0.0001
[Thu Oct  6 08:26:03 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:26:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:26:03 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:26:03 2011] Source does appear to be extended
[Thu Oct  6 08:26:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:26:33 2011] Not overwriting source region fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_src.reg
[Thu Oct  6 08:26:33 2011] Extracting stamp from image fullrun_ccd0_acisf11758_pi14-548_cl_sm2.00.img.gz, (121, 838) - (506, 1223)
[Thu Oct  6 08:26:33 2011] Writing fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28.gif
[Thu Oct  6 08:27:58 2011] ../../acisf11758/products/events/fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_src.evt and ../../acisf11758/products/events/fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Thu Oct  6 08:27:58 2011] Size of ../../acisf11758/products/events/fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_src.evt.gz[events] = 136 counts
[Thu Oct  6 08:27:58 2011] Mean chipx,y = (633.90, 25.46)
[Thu Oct  6 08:27:58 2011] Mean tdetx,y = (3086.46, 4498.10)
[Thu Oct  6 08:27:58 2011] chipx,y range = (586.00-676.00, 4.00-68.00)
[Thu Oct  6 08:27:58 2011] Size of ../../acisf11758/products/events/fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 744 counts
[Thu Oct  6 08:27:58 2011] ../../acisf11758/products/images/fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_src.img and ../../acisf11758/products/images/fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Thu Oct  6 08:27:58 2011] ../../acisf11758/products/spectra/fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_src.pi and ../../acisf11758/products/spectra/fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Thu Oct  6 08:27:58 2011] Not generating rmf since there are only 71 counts
[Thu Oct  6 08:28:06 2011] ../../acisf11758/products/lightcurves/fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_src.lc and ../../acisf11758/products/lightcurves/fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Thu Oct  6 08:28:17 2011] 154.951
[Thu Oct  6 08:33:58 2011] Updating aperture counts using extracted products
[Thu Oct  6 08:33:58 2011] Error reading totcts from fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28_src.pi.gz
[Thu Oct  6 08:33:58 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 08:33:58 2011] Using photon index=1.80, rate=0.00073, arf fullrun_ccd0_acisf11758_pi14-548_pass1_cl_src28.arf
[Thu Oct  6 08:33:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 08:33:58 2011] Updating source flux to 1.1e-14
[Thu Oct  6 08:34:03 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting