[Fri Oct 21 02:29:23 2011] Detection parameters:
  Position = (685.2, 790.3) = 10 29 19.44 26 24 54.7
  Extent = 0.5" x 0.5", rotation angle = 99 degrees
  Source counts = 53.1 +/- 7.5
  Background counts = 2.9
  Rate = 0.001 +/- 0.0001

[Fri Oct 21 02:29:24 2011] Off-axis axis estimate = 3.19'
[Fri Oct 21 02:30:30 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 02:30:30 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Oct 21 02:30:30 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.968
[Fri Oct 21 02:30:30 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.62"
[Fri Oct 21 02:30:31 2011] fullrun_ccd7_acisf11755_pi14-548_cl_pass0_src13.ximg exists
[Fri Oct 21 02:30:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11755_pi14-548_cl_pass0_src13.csv
[Fri Oct 21 02:30:31 2011] fullrun_ccd7_acisf11755_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Oct 21 02:30:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11755_pi14-548_cl_pass0_src13.csv
[Fri Oct 21 02:30:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11755_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11755_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 02:30:32 2011] fullrun_ccd7_acisf11755_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Oct 21 02:30:32 2011] fullrun_ccd7_acisf11755_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Oct 21 02:30:32 2011] Fit fullrun_ccd7_acisf11755_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Oct 21 02:30:45 2011] Spatial fit model total counts = 57.083500, observed total counts = 60.000000
[Fri Oct 21 02:30:45 2011] Offset between fit and detection position for source 23 = 0.601065 pixels
[Fri Oct 21 02:30:45 2011] 56.517280 total counts/ 2.710380 bgd. counts: snr = 32.683073
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.601065 pixels
  Position = (685.7, 790.6) = 10 29 19.44 26 24 54.6
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 53.8 +/- 7.5
  Background counts = 2.7
  Rate = 0.001 +/- 0.0001
[Fri Oct 21 02:30:45 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 02:30:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 02:30:45 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 02:30:45 2011] Source does appear to be extended
[Fri Oct 21 02:30:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 02:31:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 02:31:09 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Fri Oct 21 02:31:09 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.903
[Fri Oct 21 02:31:09 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.65"
[Fri Oct 21 02:31:10 2011] fullrun_ccd7_acisf11755_pi14-548_cl_pass1_src13.ximg exists
[Fri Oct 21 02:31:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11755_pi14-548_cl_pass1_src13.csv
[Fri Oct 21 02:31:10 2011] fullrun_ccd7_acisf11755_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Oct 21 02:31:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11755_pi14-548_cl_pass1_src13.csv
[Fri Oct 21 02:31:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11755_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11755_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 02:31:11 2011] fullrun_ccd7_acisf11755_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Oct 21 02:31:11 2011] fullrun_ccd7_acisf11755_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Oct 21 02:31:11 2011] Fit fullrun_ccd7_acisf11755_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Oct 21 02:31:24 2011] Spatial fit model total counts = 56.941100, observed total counts = 60.000000
[Fri Oct 21 02:31:24 2011] Offset between fit and detection position for source 23 = 0.027152 pixels
[Fri Oct 21 02:31:24 2011] 56.378650 total counts/ 2.824850 bgd. counts: snr = 31.863435
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.027152 pixels
  Position = (685.7, 790.6) = 10 29 19.44 26 24 54.6
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 53.6 +/- 7.5
  Background counts = 2.8
  Rate = 0.001 +/- 0.0001
[Fri Oct 21 02:31:25 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 02:31:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 02:31:25 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 02:31:25 2011] Source does appear to be extended
[Fri Oct 21 02:31:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 02:34:09 2011] Not overwriting source region fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_src.reg
[Fri Oct 21 02:34:09 2011] Extracting stamp from image fullrun_ccd7_acisf11755_pi14-548_cl_sm2.00.img.gz, (656, 761) - (715, 820)
[Fri Oct 21 02:34:09 2011] Writing fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23.gif
[Fri Oct 21 02:34:50 2011] ../../acisf11755/products/events/fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_src.evt and ../../acisf11755/products/events/fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Fri Oct 21 02:34:50 2011] Size of ../../acisf11755/products/events/fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_src.evt.gz[events] = 55 counts
[Fri Oct 21 02:34:50 2011] Mean chipx,y = (574.29, 568.09)
[Fri Oct 21 02:34:50 2011] Mean tdetx,y = (4491.29, 2270.09)
[Fri Oct 21 02:34:50 2011] chipx,y range = (553.00-588.00, 550.00-585.00)
[Fri Oct 21 02:34:50 2011] Size of ../../acisf11755/products/events/fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 40 counts
[Fri Oct 21 02:34:50 2011] ../../acisf11755/products/images/fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_src.img and ../../acisf11755/products/images/fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Fri Oct 21 02:34:50 2011] ../../acisf11755/products/spectra/fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_src.pi and ../../acisf11755/products/spectra/fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Fri Oct 21 02:34:50 2011] Not generating rmf since there are only 53 counts
[Fri Oct 21 02:34:53 2011] ../../acisf11755/products/lightcurves/fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_src.lc and ../../acisf11755/products/lightcurves/fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Fri Oct 21 02:36:10 2011] 226.719
[Fri Oct 21 02:36:15 2011] Updating aperture counts using extracted products
[Fri Oct 21 02:36:15 2011] Error reading totcts from fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23_src.pi.gz
[Fri Oct 21 02:36:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 02:36:16 2011] Using photon index=1.80, rate=0.00096, arf fullrun_ccd7_acisf11755_pi14-548_pass1_cl_src23.arf
[Fri Oct 21 02:36:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 02:36:16 2011] Updating source flux to 7.3e-15
[Fri Oct 21 02:36:43 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting