[Fri Oct 28 02:01:55 2011] Detection parameters:
  Position = (915.6, 721.4) = 13 51 4.62 77 13 4.2
  Extent = 2.9" x 1.9", rotation angle = 157 degrees
  Source counts = 17.4 +/- 5.1
  Background counts = 8.6
  Rate = 0.0005 +/- 0.0002

[Fri Oct 28 02:01:56 2011] Off-axis axis estimate = 10.23'
[Fri Oct 28 02:02:48 2011] Using EEF radius (= 4.64 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 02:02:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 02:02:48 2011] Initial guess for spatial extent in simple fitting = 4.64"
[Fri Oct 28 02:02:48 2011] source mask rpix=9.4, npix_max = 394, mask sum = 400, frac = 1.013
[Fri Oct 28 02:02:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.64"
[Fri Oct 28 02:02:48 2011] fullrun_ccd0_acisf11754_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 02:02:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11754_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 02:02:48 2011] fullrun_ccd0_acisf11754_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 02:02:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11754_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 02:02:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11754_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11754_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 02:02:48 2011] fullrun_ccd0_acisf11754_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 02:02:48 2011] fullrun_ccd0_acisf11754_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 02:02:48 2011] Fit fullrun_ccd0_acisf11754_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 02:02:57 2011] Spatial fit model total counts = 78.187600, observed total counts = 77.000000
[Fri Oct 28 02:02:57 2011] Offset between fit and detection position for source 1 = 3.036521 pixels
[Fri Oct 28 02:02:57 2011] 77.715700 total counts/ 60.003300 bgd. counts: snr = 2.286598
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.036521 pixels
  Position = (913.4, 723.6) = 13 51 5.01 77 13 5.0
  Extent = 2.4 (1.6-4.3)", rotation angle = 0
  Source counts = 17.7 +/- 8.8
  Background counts = 60.0
  Rate = 0.0005 +/- 0.0003
[Fri Oct 28 02:02:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 02:02:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 02:02:57 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 02:02:57 2011] Source does appear to be extended
[Fri Oct 28 02:02:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 02:03:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 02:03:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 02:03:17 2011] Initial guess for spatial extent in simple fitting = 2.37"
[Fri Oct 28 02:03:17 2011] source mask rpix=4.8, npix_max = 113, mask sum = 121, frac = 1.068
[Fri Oct 28 02:03:17 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.37"
[Fri Oct 28 02:03:17 2011] fullrun_ccd0_acisf11754_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 02:03:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11754_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 02:03:17 2011] fullrun_ccd0_acisf11754_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 02:03:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11754_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 02:03:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11754_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11754_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 02:03:18 2011] fullrun_ccd0_acisf11754_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 02:03:18 2011] fullrun_ccd0_acisf11754_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 02:03:18 2011] Fit fullrun_ccd0_acisf11754_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 02:03:25 2011] Spatial fit model total counts = 33.161400, observed total counts = 33.000000
[Fri Oct 28 02:03:25 2011] Offset between fit and detection position for source 1 = 0.691103 pixels
[Fri Oct 28 02:03:25 2011] 33.633500 total counts/ 16.888900 bgd. counts: snr = 4.074498
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.691103 pixels
  Position = (913.0, 723.0) = 13 51 5.07 77 13 4.8
  Extent = 2.4 (1.6-4.3)", rotation angle = 0
  Source counts = 16.7 +/- 5.8
  Background counts = 16.9
  Rate = 0.0005 +/- 0.0002
[Fri Oct 28 02:03:25 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 02:03:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 02:03:25 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 02:03:25 2011] Source does appear to be extended
[Fri Oct 28 02:03:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 02:03:47 2011] Not overwriting source region fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 28 02:03:47 2011] Extracting stamp from image fullrun_ccd0_acisf11754_pi14-548_cl_sm2.00.img.gz, (804, 614) - (1022, 832)
[Fri Oct 28 02:03:47 2011] Writing fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1.gif
[Fri Oct 28 02:03:48 2011] ../../acisf11754/products/events/fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_src.evt and ../../acisf11754/products/events/fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 28 02:03:48 2011] Size of ../../acisf11754/products/events/fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_src.evt.gz[events] = 30 counts
[Fri Oct 28 02:03:48 2011] Mean chipx,y = (280.53, 440.90)
[Fri Oct 28 02:03:48 2011] Mean tdetx,y = (3501.90, 4851.47)
[Fri Oct 28 02:03:48 2011] chipx,y range = (258.00-308.00, 412.00-469.00)
[Fri Oct 28 02:03:49 2011] Size of ../../acisf11754/products/events/fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 94 counts
[Fri Oct 28 02:03:49 2011] ../../acisf11754/products/images/fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_src.img and ../../acisf11754/products/images/fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 28 02:03:49 2011] ../../acisf11754/products/spectra/fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_src.pi and ../../acisf11754/products/spectra/fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 28 02:03:49 2011] Not generating rmf since there are only 16 counts
[Fri Oct 28 02:03:51 2011] ../../acisf11754/products/lightcurves/fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_src.lc and ../../acisf11754/products/lightcurves/fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 28 02:04:18 2011] 147.911
[Fri Oct 28 02:06:29 2011] Updating aperture counts using extracted products
[Fri Oct 28 02:06:29 2011] Error reading totcts from fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 28 02:06:29 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 02:06:29 2011] Using photon index=1.80, rate=0.000513, arf fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1.arf
[Fri Oct 28 02:06:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 02:06:29 2011] Updating source flux to 8.1e-15
[Fri Oct 28 02:06:32 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 02:06:33 2011] acisf11754/analysis//spectral/fullrun_ccd0_acisf11754_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete