[Mon Oct 24 02:41:38 2011] Detection parameters:
  Position = (385.5, 927.0) = 20 10 10.57 -48 17 24.1
  Extent = 0.9" x 0.7", rotation angle = 37 degrees
  Source counts = 27.1 +/- 6.6
  Background counts = 15.9
  Rate = 0.0004 +/- 9e-05

[Mon Oct 24 02:41:39 2011] Off-axis axis estimate = 7.41'
[Mon Oct 24 02:42:48 2011] Using EEF radius (= 2.43 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 02:42:48 2011] Initial guess for spatial extent in simple fitting = 2.43"
[Mon Oct 24 02:42:48 2011] source mask rpix=4.9, npix_max = 118, mask sum = 110, frac = 0.926
[Mon Oct 24 02:42:48 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 2.43"
[Mon Oct 24 02:42:50 2011] fullrun_ccd3_acisf11753_pi14-548_cl_pass0_src20.ximg exists
[Mon Oct 24 02:42:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11753_pi14-548_cl_pass0_src20.csv
[Mon Oct 24 02:42:50 2011] fullrun_ccd3_acisf11753_pi14-548_cl_pass0_src20_1.ximg exists
[Mon Oct 24 02:42:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11753_pi14-548_cl_pass0_src20.csv
[Mon Oct 24 02:42:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11753_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11753_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 02:42:50 2011] fullrun_ccd3_acisf11753_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Mon Oct 24 02:42:50 2011] fullrun_ccd3_acisf11753_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Oct 24 02:42:50 2011] Fit fullrun_ccd3_acisf11753_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Oct 24 02:43:10 2011] Spatial fit model total counts = 98.809600, observed total counts = 99.000000
[Mon Oct 24 02:43:10 2011] Offset between fit and detection position for source 46 = 0.674269 pixels
[Mon Oct 24 02:43:10 2011] 97.729100 total counts/ 79.236700 bgd. counts: snr = 2.077448
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.674269 pixels
  Position = (386.2, 927.3) = 20 10 10.57 -48 17 24.2
  Extent = 1.1 (0.8-1.6)", rotation angle = 0
  Source counts = 18.5 +/- 9.9
  Background counts = 79.2
  Rate = 0.0003 +/- 0.0001
[Mon Oct 24 02:43:10 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 02:43:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 02:43:10 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 02:43:10 2011] Source does appear to be extended
[Mon Oct 24 02:43:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 02:43:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 02:43:41 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Mon Oct 24 02:43:41 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.054
[Mon Oct 24 02:43:41 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 1.07"
[Mon Oct 24 02:43:43 2011] fullrun_ccd3_acisf11753_pi14-548_cl_pass1_src20.ximg exists
[Mon Oct 24 02:43:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11753_pi14-548_cl_pass1_src20.csv
[Mon Oct 24 02:43:43 2011] fullrun_ccd3_acisf11753_pi14-548_cl_pass1_src20_1.ximg exists
[Mon Oct 24 02:43:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11753_pi14-548_cl_pass1_src20.csv
[Mon Oct 24 02:43:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11753_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11753_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 02:43:44 2011] fullrun_ccd3_acisf11753_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Mon Oct 24 02:43:44 2011] fullrun_ccd3_acisf11753_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Oct 24 02:43:44 2011] Fit fullrun_ccd3_acisf11753_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Oct 24 02:44:00 2011] Spatial fit model total counts = 36.632300, observed total counts = 37.000000
[Mon Oct 24 02:44:00 2011] Offset between fit and detection position for source 46 = 0.271339 pixels
[Mon Oct 24 02:44:00 2011] 36.942700 total counts/ 16.716200 bgd. counts: snr = 4.947114
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.271339 pixels
  Position = (385.9, 927.1) = 20 10 10.58 -48 17 24.3
  Extent = 1.1 (0.8-1.7)", rotation angle = 0
  Source counts = 20.2 +/- 6.1
  Background counts = 16.7
  Rate = 0.0003 +/- 8e-05
[Mon Oct 24 02:44:00 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 02:44:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 02:44:00 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 02:44:00 2011] Source does appear to be extended
[Mon Oct 24 02:44:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 02:47:59 2011] Not overwriting source region fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_src.reg
[Mon Oct 24 02:47:59 2011] Extracting stamp from image fullrun_ccd3_acisf11753_pi14-548_cl_sm2.00.img.gz, (337, 878) - (435, 976)
[Mon Oct 24 02:47:59 2011] Writing fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46.gif
[Mon Oct 24 02:48:53 2011] ../../acisf11753/products/events/fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_src.evt and ../../acisf11753/products/events/fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_bgd.evt exist, delete to re-create
[Mon Oct 24 02:48:53 2011] Size of ../../acisf11753/products/events/fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_src.evt.gz[events] = 35 counts
[Mon Oct 24 02:48:53 2011] Mean chipx,y = (133.31, 646.63)
[Mon Oct 24 02:48:53 2011] Mean tdetx,y = (4485.37, 3194.31)
[Mon Oct 24 02:48:53 2011] chipx,y range = (115.00-149.00, 625.00-666.00)
[Mon Oct 24 02:48:53 2011] Size of ../../acisf11753/products/events/fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_bgd.evt.gz[events] = 122 counts
[Mon Oct 24 02:48:53 2011] ../../acisf11753/products/images/fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_src.img and ../../acisf11753/products/images/fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_bgd.img exist, delete to re-create
[Mon Oct 24 02:48:53 2011] ../../acisf11753/products/spectra/fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_src.pi and ../../acisf11753/products/spectra/fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_bgd.pi exist, delete to re-create
[Mon Oct 24 02:48:53 2011] Not generating rmf since there are only 20 counts
[Mon Oct 24 02:48:55 2011] ../../acisf11753/products/lightcurves/fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_src.lc and ../../acisf11753/products/lightcurves/fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_bgd.lc exist, delete to re-create
[Mon Oct 24 02:49:46 2011] 167.943
[Mon Oct 24 02:49:53 2011] Updating aperture counts using extracted products
[Mon Oct 24 02:49:53 2011] Error reading totcts from fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46_src.pi.gz
[Mon Oct 24 02:49:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 02:49:53 2011] Using photon index=1.80, rate=0.000279, arf fullrun_ccd3_acisf11753_pi14-548_pass1_cl_src46.arf
[Mon Oct 24 02:49:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 02:49:53 2011] Updating source flux to 3.9e-15
[Mon Oct 24 02:50:25 2011] Source 46 has fewer than 100.000000 counts, skipping spectral fitting