[Mon Oct 24 02:41:32 2011] Detection parameters:
  Position = (871.4, 602.5) = 20 9 12.71 -48 26 43.2
  Extent = 0.9" x 0.7", rotation angle = 138 degrees
  Source counts = 3816.3 +/- 63.3
  Background counts = 192.7
  Rate = 0.05 +/- 0.0009

[Mon Oct 24 02:41:34 2011] Off-axis axis estimate = 7.96'
[Mon Oct 24 02:42:44 2011] Using EEF radius (= 2.80 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 02:42:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 02:42:44 2011] Initial guess for spatial extent in simple fitting = 2.80"
[Mon Oct 24 02:42:44 2011] source mask rpix=5.7, npix_max = 153, mask sum = 164, frac = 1.070
[Mon Oct 24 02:42:44 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.80"
[Mon Oct 24 02:42:45 2011] fullrun_ccd1_acisf11753_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 02:42:45 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11753_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 02:42:45 2011] fullrun_ccd1_acisf11753_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 02:42:45 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11753_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 02:42:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11753_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11753_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 02:42:46 2011] fullrun_ccd1_acisf11753_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 02:42:46 2011] fullrun_ccd1_acisf11753_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 02:42:46 2011] Fit fullrun_ccd1_acisf11753_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 02:43:01 2011] Spatial fit model total counts = 4483.650000, observed total counts = 4529.000000
[Mon Oct 24 02:43:01 2011] Offset between fit and detection position for source 13 = 0.598891 pixels
[Mon Oct 24 02:43:01 2011] 4489.178000 total counts/ 284.718000 bgd. counts: snr = 249.174022
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.598891 pixels
  Position = (871.8, 602.8) = 20 9 12.72 -48 26 43.3
  Extent = 2.2 (2.2-2.3)", rotation angle = 0
  Source counts = 4204.5 +/- 67.0
  Background counts = 284.7
  Rate = 0.06 +/- 0.0009
[Mon Oct 24 02:43:01 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 02:43:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 02:43:01 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 02:43:01 2011] Source does appear to be extended
[Mon Oct 24 02:43:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 02:43:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 02:43:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 02:43:37 2011] Initial guess for spatial extent in simple fitting = 2.21"
[Mon Oct 24 02:43:37 2011] source mask rpix=4.5, npix_max = 99, mask sum = 99, frac = 0.994
[Mon Oct 24 02:43:37 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.21"
[Mon Oct 24 02:43:37 2011] fullrun_ccd1_acisf11753_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 02:43:37 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11753_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 02:43:37 2011] fullrun_ccd1_acisf11753_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 02:43:37 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11753_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 02:43:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11753_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11753_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 02:43:38 2011] fullrun_ccd1_acisf11753_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 02:43:38 2011] fullrun_ccd1_acisf11753_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 02:43:38 2011] Fit fullrun_ccd1_acisf11753_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 02:43:53 2011] Spatial fit model total counts = 4424.850000, observed total counts = 4481.000000
[Mon Oct 24 02:43:53 2011] Offset between fit and detection position for source 13 = 0.064737 pixels
[Mon Oct 24 02:43:53 2011] 4434.675000 total counts/ 459.145000 bgd. counts: snr = 185.532546
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.064737 pixels
  Position = (871.8, 602.8) = 20 9 12.71 -48 26 43.3
  Extent = 2.1 (2.0-2.1)", rotation angle = 0
  Source counts = 3975.5 +/- 66.6
  Background counts = 459.1
  Rate = 0.05 +/- 0.0009
[Mon Oct 24 02:43:53 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 02:43:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 02:43:53 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 02:43:53 2011] Source does appear to be extended
[Mon Oct 24 02:43:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 02:45:12 2011] Not overwriting source region fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_src.reg
[Mon Oct 24 02:45:12 2011] Extracting stamp from image fullrun_ccd1_acisf11753_pi14-548_cl_sm2.00.img.gz, (777, 508) - (966, 697)
[Mon Oct 24 02:45:12 2011] Writing fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13.gif
[Mon Oct 24 02:45:14 2011] ../../acisf11753/products/events/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_src.evt and ../../acisf11753/products/events/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Mon Oct 24 02:45:14 2011] Size of ../../acisf11753/products/events/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_src.evt.gz[events] = 4413 counts
[Mon Oct 24 02:45:14 2011] Mean chipx,y = (711.55, 478.60)
[Mon Oct 24 02:45:14 2011] Mean tdetx,y = (4653.40, 4818.55)
[Mon Oct 24 02:45:14 2011] chipx,y range = (680.00-744.00, 447.00-508.00)
[Mon Oct 24 02:45:14 2011] Size of ../../acisf11753/products/events/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 346 counts
[Mon Oct 24 02:45:14 2011] ../../acisf11753/products/images/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_src.img and ../../acisf11753/products/images/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Mon Oct 24 02:45:14 2011] ../../acisf11753/products/spectra/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_src.pi and ../../acisf11753/products/spectra/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Mon Oct 24 02:45:16 2011] ../../acisf11753/products/lightcurves/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_src.lc and ../../acisf11753/products/lightcurves/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Mon Oct 24 02:46:07 2011] Keeping rmf generated by specextract
[Mon Oct 24 02:46:07 2011] 166.517
[Mon Oct 24 02:49:51 2011] Updating aperture counts using extracted products
[Mon Oct 24 02:49:51 2011] Error reading totcts from fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_src.pi.gz
[Mon Oct 24 02:49:51 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 02:49:51 2011] Using photon index=1.80, rate=0.0548, arf fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13.arf
[Mon Oct 24 02:49:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 02:49:51 2011] Updating source flux to 7.6e-13
[Mon Oct 24 02:50:18 2011] Reading fit data from acisf11753/analysis//spectral/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_pl.csv
[Mon Oct 24 02:50:18 2011] Spectral fit parameter nH value = 1.47236e+13
[Mon Oct 24 02:50:18 2011] Spectral fit parameter PhoIndex value = 1.92963
[Mon Oct 24 02:50:18 2011] Failed to get F(0.3-8.0) from acisf11753/analysis//spectral/fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 02:50:18 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 02:50:18 2011] Using Nh = 1.5e+13, photon index=1.93, rate=0.0548, arf fullrun_ccd1_acisf11753_pi14-548_pass1_cl_src13.arf
[Mon Oct 24 02:50:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 02:50:18 2011] Updating source flux to 7.9e-13