[Sat Oct 15 23:38:08 2011] Detection parameters:
  Position = (503.9, 405.3) = 20 7 17.71 -48 22 13.5
  Extent = 0.5" x 0.5", rotation angle = 131 degrees
  Source counts = 17.6 +/- 5.3
  Background counts = 10.4
  Rate = 0.0002 +/- 6e-05

[Sat Oct 15 23:38:09 2011] Off-axis axis estimate = 1.21'
[Sat Oct 15 23:39:37 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:39:37 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct 15 23:39:37 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.920
[Sat Oct 15 23:39:37 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 0.38"
[Sat Oct 15 23:39:39 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src38.ximg exists
[Sat Oct 15 23:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src38.csv
[Sat Oct 15 23:39:39 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src38_1.ximg exists
[Sat Oct 15 23:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src38.csv
[Sat Oct 15 23:39:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:39:41 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src38.ximg exists
[Sat Oct 15 23:39:41 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src38_1.ximg exists
[Sat Oct 15 23:39:41 2011] Fit fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src38 appears to have run properly
[Sat Oct 15 23:40:09 2011] Spatial fit model total counts = 58.837300, observed total counts = 56.000000
[Sat Oct 15 23:40:09 2011] Offset between fit and detection position for source 77 = 1.165791 pixels
[Sat Oct 15 23:40:09 2011] 56.145800 total counts/ 41.884500 bgd. counts: snr = 2.203598
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 1.165791 pixels
  Position = (505.1, 405.3) = 20 7 17.67 -48 22 13.8
  Extent = 0.5 (0.3-1.5)", rotation angle = 0
  Source counts = 14.3 +/- 7.5
  Background counts = 41.9
  Rate = 0.0002 +/- 8e-05
[Sat Oct 15 23:40:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:40:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:40:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:40:09 2011] Source does appear to be extended
[Sat Oct 15 23:40:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:40:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:40:41 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sat Oct 15 23:40:41 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.051
[Sat Oct 15 23:40:41 2011] Giving source the simple spatial ID 38 for pass 1, mean size = 0.47"
[Sat Oct 15 23:40:43 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src38.ximg exists
[Sat Oct 15 23:40:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src38.csv
[Sat Oct 15 23:40:43 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src38_1.ximg exists
[Sat Oct 15 23:40:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src38.csv
[Sat Oct 15 23:40:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:40:44 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src38.ximg exists
[Sat Oct 15 23:40:44 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src38_1.ximg exists
[Sat Oct 15 23:40:44 2011] Fit fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src38 appears to have run properly
[Sat Oct 15 23:41:09 2011] Spatial fit model total counts = 57.325500, observed total counts = 54.000000
[Sat Oct 15 23:41:09 2011] Offset between fit and detection position for source 77 = 0.082650 pixels
[Sat Oct 15 23:41:09 2011] 54.265400 total counts/ 38.881800 bgd. counts: snr = 2.467089
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 0.082650 pixels
  Position = (505.1, 405.4) = 20 7 17.67 -48 22 13.7
  Extent = 0.5 (0.3-1.5)", rotation angle = 0
  Source counts = 15.4 +/- 7.4
  Background counts = 38.9
  Rate = 0.0002 +/- 8e-05
[Sat Oct 15 23:41:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:41:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:41:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:41:09 2011] Source does appear to be extended
[Sat Oct 15 23:41:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:46:45 2011] Not overwriting source region fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_src.reg
[Sat Oct 15 23:46:45 2011] Extracting stamp from image fullrun_ccd3_acisf11752_pi14-548_cl_sm2.00.img.gz, (480, 380) - (530, 430)
[Sat Oct 15 23:46:45 2011] Writing fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77.gif
[Sat Oct 15 23:48:35 2011] ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_src.evt and ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_bgd.evt exist, delete to re-create
[Sat Oct 15 23:48:35 2011] Size of ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_src.evt.gz[events] = 28 counts
[Sat Oct 15 23:48:35 2011] Mean chipx,y = (640.64, 877.04)
[Sat Oct 15 23:48:35 2011] Mean tdetx,y = (4254.96, 3701.64)
[Sat Oct 15 23:48:35 2011] chipx,y range = (621.00-657.00, 856.00-894.00)
[Sat Oct 15 23:48:35 2011] Size of ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_bgd.evt.gz[events] = 120 counts
[Sat Oct 15 23:48:35 2011] ../../acisf11752/products/images/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_src.img and ../../acisf11752/products/images/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_bgd.img exist, delete to re-create
[Sat Oct 15 23:48:35 2011] ../../acisf11752/products/spectra/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_src.pi and ../../acisf11752/products/spectra/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_bgd.pi exist, delete to re-create
[Sat Oct 15 23:48:35 2011] Not generating rmf since there are only 15 counts
[Sat Oct 15 23:48:37 2011] ../../acisf11752/products/lightcurves/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_src.lc and ../../acisf11752/products/lightcurves/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_bgd.lc exist, delete to re-create
[Sat Oct 15 23:49:16 2011] 189
[Sat Oct 15 23:49:33 2011] Updating aperture counts using extracted products
[Sat Oct 15 23:49:33 2011] Error reading totcts from fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77_src.pi.gz
[Sat Oct 15 23:49:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 23:49:33 2011] Using photon index=1.80, rate=0.000165, arf fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src77.arf
[Sat Oct 15 23:49:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 23:49:33 2011] Updating source flux to 2e-15
[Sat Oct 15 23:49:55 2011] Source 77 has fewer than 100.000000 counts, skipping spectral fitting