[Sat Oct 15 23:38:08 2011] Detection parameters:
  Position = (833.7, 347.0) = 20 7 1.42 -48 22 42.1
  Extent = 0.9" x 0.5", rotation angle = 2 degrees
  Source counts = 17.6 +/- 4.7
  Background counts = 4.4
  Rate = 0.0002 +/- 5e-05

[Sat Oct 15 23:38:09 2011] Off-axis axis estimate = 3.60'
[Sat Oct 15 23:39:37 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:39:37 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Sat Oct 15 23:39:37 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.043
[Sat Oct 15 23:39:37 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 0.72"
[Sat Oct 15 23:39:39 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src39.ximg exists
[Sat Oct 15 23:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src39.csv
[Sat Oct 15 23:39:39 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src39_1.ximg exists
[Sat Oct 15 23:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src39.csv
[Sat Oct 15 23:39:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:39:41 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Sat Oct 15 23:39:41 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Oct 15 23:39:41 2011] Fit fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Sat Oct 15 23:40:09 2011] Source 74 is offset by -0.827423 and 0.281382 pixels which is larger than
2 X fitted extent = 0.734488 x 0.734488, not incorporating fit results
[Sat Oct 15 23:40:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:40:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:40:09 2011] Assessing source extent using major
[Sat Oct 15 23:40:09 2011] Source does appear to be extended
[Sat Oct 15 23:40:09 2011] Computing asymmetry using major and minor axis, asym = 1.87
[Sat Oct 15 23:40:09 2011] Source is asymmetric
[Sat Oct 15 23:40:41 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:40:41 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Sat Oct 15 23:40:41 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.043
[Sat Oct 15 23:40:41 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 0.72"
[Sat Oct 15 23:40:43 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src39.ximg exists
[Sat Oct 15 23:40:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src39.csv
[Sat Oct 15 23:40:43 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src39_1.ximg exists
[Sat Oct 15 23:40:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src39.csv
[Sat Oct 15 23:40:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:40:44 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src39.ximg exists
[Sat Oct 15 23:40:44 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Oct 15 23:40:44 2011] Fit fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src39 appears to have run properly
[Sat Oct 15 23:41:09 2011] Spatial fit model total counts = 36.998400, observed total counts = 37.000000
[Sat Oct 15 23:41:09 2011] Offset between fit and detection position for source 74 = 1.426882 pixels
[Sat Oct 15 23:41:09 2011] 37.984400 total counts/ 23.689100 bgd. counts: snr = 2.937102
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 1.426882 pixels
  Position = (835.1, 347.5) = 20 7 1.38 -48 22 42.1
  Extent = 0.7 (0.3-1.1)", rotation angle = 0
  Source counts = 14.3 +/- 6.2
  Background counts = 23.7
  Rate = 0.0002 +/- 7e-05
[Sat Oct 15 23:41:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:41:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:41:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:41:09 2011] Source does appear to be extended
[Sat Oct 15 23:41:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:46:45 2011] Not overwriting source region fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_src.reg
[Sat Oct 15 23:46:45 2011] Extracting stamp from image fullrun_ccd3_acisf11752_pi14-548_cl_sm2.00.img.gz, (805, 317) - (865, 378)
[Sat Oct 15 23:46:45 2011] Writing fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74.gif
[Sat Oct 15 23:48:37 2011] ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_src.evt and ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_bgd.evt exist, delete to re-create
[Sat Oct 15 23:48:37 2011] Size of ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_src.evt.gz[events] = 23 counts
[Sat Oct 15 23:48:37 2011] Mean chipx,y = (879.09, 636.87)
[Sat Oct 15 23:48:37 2011] Mean tdetx,y = (4495.13, 3940.09)
[Sat Oct 15 23:48:37 2011] chipx,y range = (861.00-898.00, 619.00-655.00)
[Sat Oct 15 23:48:37 2011] Size of ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_bgd.evt.gz[events] = 61 counts
[Sat Oct 15 23:48:37 2011] ../../acisf11752/products/images/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_src.img and ../../acisf11752/products/images/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_bgd.img exist, delete to re-create
[Sat Oct 15 23:48:37 2011] ../../acisf11752/products/spectra/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_src.pi and ../../acisf11752/products/spectra/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_bgd.pi exist, delete to re-create
[Sat Oct 15 23:48:37 2011] Not generating rmf since there are only 14 counts
[Sat Oct 15 23:48:40 2011] ../../acisf11752/products/lightcurves/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_src.lc and ../../acisf11752/products/lightcurves/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_bgd.lc exist, delete to re-create
[Sat Oct 15 23:49:16 2011] 197.773
[Sat Oct 15 23:49:33 2011] Updating aperture counts using extracted products
[Sat Oct 15 23:49:33 2011] Error reading totcts from fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74_src.pi.gz
[Sat Oct 15 23:49:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 23:49:33 2011] Using photon index=1.80, rate=0.000153, arf fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src74.arf
[Sat Oct 15 23:49:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 23:49:33 2011] Updating source flux to 1.8e-15
[Sat Oct 15 23:49:55 2011] Flag b found in src. 74 procflags, skipping spectral fitting
[Sat Oct 15 23:49:55 2011] Source 74 has fewer than 100.000000 counts, skipping spectral fitting