[Sat Oct 15 23:38:08 2011] Detection parameters:
  Position = (769.4, 962.4) = 20 7 4.62 -48 17 39.4
  Extent = 1.5" x 0.9", rotation angle = 154 degrees
  Source counts = 21.9 +/- 5.7
  Background counts = 10.1
  Rate = 0.0002 +/- 6e-05

[Sat Oct 15 23:38:09 2011] Off-axis axis estimate = 6.20'
[Sat Oct 15 23:39:37 2011] Using EEF radius (= 1.73 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:39:37 2011] Initial guess for spatial extent in simple fitting = 1.73"
[Sat Oct 15 23:39:37 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.988
[Sat Oct 15 23:39:37 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 1.73"
[Sat Oct 15 23:39:39 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src31.ximg exists
[Sat Oct 15 23:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src31.csv
[Sat Oct 15 23:39:39 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src31_1.ximg exists
[Sat Oct 15 23:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src31.csv
[Sat Oct 15 23:39:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:39:41 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Sat Oct 15 23:39:41 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Oct 15 23:39:41 2011] Fit fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Sat Oct 15 23:40:09 2011] Spatial fit model total counts = 40.391400, observed total counts = 40.000000
[Sat Oct 15 23:40:09 2011] Offset between fit and detection position for source 65 = 1.182376 pixels
[Sat Oct 15 23:40:09 2011] 40.733400 total counts/ 19.435100 bgd. counts: snr = 4.831161
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 1.182376 pixels
  Position = (769.8, 963.5) = 20 7 4.63 -48 17 39.0
  Extent = 1.2 (0.8-2.1)", rotation angle = 0
  Source counts = 21.3 +/- 6.4
  Background counts = 19.4
  Rate = 0.0002 +/- 7e-05
[Sat Oct 15 23:40:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:40:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:40:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:40:09 2011] Source does appear to be extended
[Sat Oct 15 23:40:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:40:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:40:41 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Sat Oct 15 23:40:41 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.902
[Sat Oct 15 23:40:41 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 1.17"
[Sat Oct 15 23:40:42 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src31.ximg exists
[Sat Oct 15 23:40:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src31.csv
[Sat Oct 15 23:40:43 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src31_1.ximg exists
[Sat Oct 15 23:40:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src31.csv
[Sat Oct 15 23:40:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:40:44 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Sat Oct 15 23:40:44 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Sat Oct 15 23:40:44 2011] Fit fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Sat Oct 15 23:41:09 2011] Spatial fit model total counts = 30.929200, observed total counts = 31.000000
[Sat Oct 15 23:41:09 2011] Offset between fit and detection position for source 65 = 0.639101 pixels
[Sat Oct 15 23:41:09 2011] 31.166710 total counts/ 7.618310 bgd. counts: snr = 8.531631
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 0.639101 pixels
  Position = (769.1, 963.6) = 20 7 4.66 -48 17 39.0
  Extent = 1.3 (0.9-2.2)", rotation angle = 0
  Source counts = 23.5 +/- 5.6
  Background counts = 7.6
  Rate = 0.0003 +/- 6e-05
[Sat Oct 15 23:41:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:41:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:41:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:41:09 2011] Source does appear to be extended
[Sat Oct 15 23:41:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:46:45 2011] Not overwriting source region fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_src.reg
[Sat Oct 15 23:46:45 2011] Extracting stamp from image fullrun_ccd3_acisf11752_pi14-548_cl_sm2.00.img.gz, (708, 902) - (830, 1025)
[Sat Oct 15 23:46:45 2011] Writing fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65.gif
[Sat Oct 15 23:48:15 2011] ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_src.evt and ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_bgd.evt exist, delete to re-create
[Sat Oct 15 23:48:15 2011] Size of ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_src.evt.gz[events] = 38 counts
[Sat Oct 15 23:48:15 2011] Mean chipx,y = (335.61, 335.05)
[Sat Oct 15 23:48:15 2011] Mean tdetx,y = (4796.95, 3396.61)
[Sat Oct 15 23:48:15 2011] chipx,y range = (310.00-355.00, 318.00-360.00)
[Sat Oct 15 23:48:15 2011] Size of ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_bgd.evt.gz[events] = 163 counts
[Sat Oct 15 23:48:15 2011] ../../acisf11752/products/images/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_src.img and ../../acisf11752/products/images/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_bgd.img exist, delete to re-create
[Sat Oct 15 23:48:15 2011] ../../acisf11752/products/spectra/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_src.pi and ../../acisf11752/products/spectra/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_bgd.pi exist, delete to re-create
[Sat Oct 15 23:48:15 2011] Not generating rmf since there are only 23 counts
[Sat Oct 15 23:48:18 2011] ../../acisf11752/products/lightcurves/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_src.lc and ../../acisf11752/products/lightcurves/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_bgd.lc exist, delete to re-create
[Sat Oct 15 23:49:16 2011] 180.065
[Sat Oct 15 23:49:33 2011] Updating aperture counts using extracted products
[Sat Oct 15 23:49:33 2011] Error reading totcts from fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65_src.pi.gz
[Sat Oct 15 23:49:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 23:49:33 2011] Using photon index=1.80, rate=0.000252, arf fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src65.arf
[Sat Oct 15 23:49:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 23:49:33 2011] Updating source flux to 3.3e-15
[Sat Oct 15 23:49:55 2011] Source 65 has fewer than 100.000000 counts, skipping spectral fitting