[Sat Oct 15 23:38:07 2011] Detection parameters:
  Position = (645.6, 801.4) = 20 7 10.72 -48 18 58.6
  Extent = 0.9" x 0.6", rotation angle = 28 degrees
  Source counts = 28.7 +/- 5.8
  Background counts = 5.3
  Rate = 0.0003 +/- 6e-05

[Sat Oct 15 23:38:09 2011] Off-axis axis estimate = 4.56'
[Sat Oct 15 23:39:37 2011] Using EEF radius (= 1.01 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:39:37 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Sat Oct 15 23:39:37 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.954
[Sat Oct 15 23:39:37 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 1.01"
[Sat Oct 15 23:39:39 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src23.ximg exists
[Sat Oct 15 23:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src23.csv
[Sat Oct 15 23:39:39 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src23_1.ximg exists
[Sat Oct 15 23:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src23.csv
[Sat Oct 15 23:39:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:39:40 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Sat Oct 15 23:39:40 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Oct 15 23:39:40 2011] Fit fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Sat Oct 15 23:40:09 2011] Spatial fit model total counts = 40.998000, observed total counts = 41.000000
[Sat Oct 15 23:40:09 2011] Offset between fit and detection position for source 54 = 0.568339 pixels
[Sat Oct 15 23:40:09 2011] 40.555300 total counts/ 14.461400 bgd. counts: snr = 6.861733
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.568339 pixels
  Position = (646.0, 801.8) = 20 7 10.73 -48 18 58.7
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 26.1 +/- 6.4
  Background counts = 14.5
  Rate = 0.0003 +/- 7e-05
[Sat Oct 15 23:40:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:40:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:40:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:40:09 2011] Source does appear to be extended
[Sat Oct 15 23:40:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:40:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:40:41 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Sat Oct 15 23:40:41 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Sat Oct 15 23:40:41 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.79"
[Sat Oct 15 23:40:42 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src23.ximg exists
[Sat Oct 15 23:40:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src23.csv
[Sat Oct 15 23:40:42 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src23_1.ximg exists
[Sat Oct 15 23:40:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src23.csv
[Sat Oct 15 23:40:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:40:43 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Sat Oct 15 23:40:43 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Oct 15 23:40:43 2011] Fit fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Sat Oct 15 23:41:09 2011] Spatial fit model total counts = 44.394000, observed total counts = 44.000000
[Sat Oct 15 23:41:09 2011] Offset between fit and detection position for source 54 = 0.183837 pixels
[Sat Oct 15 23:41:09 2011] 44.987600 total counts/ 21.018400 bgd. counts: snr = 5.228218
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.183837 pixels
  Position = (645.9, 801.8) = 20 7 10.74 -48 18 58.7
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 24.0 +/- 6.7
  Background counts = 21.0
  Rate = 0.0003 +/- 7e-05
[Sat Oct 15 23:41:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:41:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:41:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:41:09 2011] Source does appear to be extended
[Sat Oct 15 23:41:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:46:44 2011] Not overwriting source region fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_src.reg
[Sat Oct 15 23:46:44 2011] Extracting stamp from image fullrun_ccd3_acisf11752_pi14-548_cl_sm2.00.img.gz, (613, 769) - (678, 834)
[Sat Oct 15 23:46:44 2011] Writing fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54.gif
[Sat Oct 15 23:47:52 2011] ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_src.evt and ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_bgd.evt exist, delete to re-create
[Sat Oct 15 23:47:52 2011] Size of ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_src.evt.gz[events] = 34 counts
[Sat Oct 15 23:47:52 2011] Mean chipx,y = (394.03, 535.06)
[Sat Oct 15 23:47:52 2011] Mean tdetx,y = (4596.94, 3455.03)
[Sat Oct 15 23:47:52 2011] chipx,y range = (377.00-414.00, 515.00-550.00)
[Sat Oct 15 23:47:52 2011] Size of ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_bgd.evt.gz[events] = 44 counts
[Sat Oct 15 23:47:52 2011] ../../acisf11752/products/images/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_src.img and ../../acisf11752/products/images/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_bgd.img exist, delete to re-create
[Sat Oct 15 23:47:52 2011] ../../acisf11752/products/spectra/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_src.pi and ../../acisf11752/products/spectra/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_bgd.pi exist, delete to re-create
[Sat Oct 15 23:47:52 2011] Not generating rmf since there are only 23 counts
[Sat Oct 15 23:47:55 2011] ../../acisf11752/products/lightcurves/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_src.lc and ../../acisf11752/products/lightcurves/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_bgd.lc exist, delete to re-create
[Sat Oct 15 23:49:15 2011] 188.064
[Sat Oct 15 23:49:32 2011] Updating aperture counts using extracted products
[Sat Oct 15 23:49:32 2011] Error reading totcts from fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54_src.pi.gz
[Sat Oct 15 23:49:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 23:49:33 2011] Using photon index=1.80, rate=0.000256, arf fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src54.arf
[Sat Oct 15 23:49:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 23:49:33 2011] Updating source flux to 3.2e-15
[Sat Oct 15 23:49:55 2011] Source 54 has fewer than 100.000000 counts, skipping spectral fitting