[Sat Oct 15 23:38:06 2011] Detection parameters:
  Position = (427.9, 408.6) = 20 7 21.46 -48 22 11.9
  Extent = 0.7" x 0.5", rotation angle = 112 degrees
  Source counts = 12.8 +/- 4.6
  Background counts = 8.2
  Rate = 0.0001 +/- 5e-05

[Sat Oct 15 23:38:09 2011] Off-axis axis estimate = 0.89'
[Sat Oct 15 23:39:37 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:39:37 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct 15 23:39:37 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.925
[Sat Oct 15 23:39:37 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 0.38"
[Sat Oct 15 23:39:39 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src49.ximg exists
[Sat Oct 15 23:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src49.csv
[Sat Oct 15 23:39:39 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src49_1.ximg exists
[Sat Oct 15 23:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src49.csv
[Sat Oct 15 23:39:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11752_pi14-548_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:39:41 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src49.ximg exists
[Sat Oct 15 23:39:41 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src49_1.ximg exists
[Sat Oct 15 23:39:41 2011] Fit fullrun_ccd3_acisf11752_pi14-548_cl_pass0_tfrozen_src49 appears to have run properly
[Sat Oct 15 23:40:09 2011] Spatial fit model total counts = 42.877800, observed total counts = 43.000000
[Sat Oct 15 23:40:09 2011] Offset between fit and detection position for source 23 = 1.256290 pixels
[Sat Oct 15 23:40:09 2011] 43.038500 total counts/ 29.786600 bgd. counts: snr = 2.428106
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.256290 pixels
  Position = (428.6, 409.7) = 20 7 21.45 -48 22 11.6
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 13.3 +/- 6.6
  Background counts = 29.8
  Rate = 0.0001 +/- 7e-05
[Sat Oct 15 23:40:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:40:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:40:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:40:09 2011] Source does appear to be extended
[Sat Oct 15 23:40:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:40:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:40:41 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sat Oct 15 23:40:41 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.993
[Sat Oct 15 23:40:41 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 0.49"
[Sat Oct 15 23:40:43 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src49.ximg exists
[Sat Oct 15 23:40:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src49.csv
[Sat Oct 15 23:40:43 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src49_1.ximg exists
[Sat Oct 15 23:40:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src49.csv
[Sat Oct 15 23:40:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11752_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:40:44 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Sat Oct 15 23:40:44 2011] fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Sat Oct 15 23:40:44 2011] Fit fullrun_ccd3_acisf11752_pi14-548_cl_pass1_tfrozen_src49 appears to have run properly
[Sat Oct 15 23:41:09 2011] Spatial fit model total counts = 40.925300, observed total counts = 41.000000
[Sat Oct 15 23:41:09 2011] Offset between fit and detection position for source 23 = 0.037697 pixels
[Sat Oct 15 23:41:09 2011] 40.717800 total counts/ 27.311400 bgd. counts: snr = 2.565312
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.037697 pixels
  Position = (428.5, 409.7) = 20 7 21.45 -48 22 11.6
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 13.4 +/- 6.4
  Background counts = 27.3
  Rate = 0.0001 +/- 7e-05
[Sat Oct 15 23:41:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:41:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:41:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:41:09 2011] Source does appear to be extended
[Sat Oct 15 23:41:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:46:45 2011] Not overwriting source region fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_src.reg
[Sat Oct 15 23:46:45 2011] Extracting stamp from image fullrun_ccd3_acisf11752_pi14-548_cl_sm2.00.img.gz, (406, 387) - (451, 432)
[Sat Oct 15 23:46:45 2011] Writing fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23.gif
[Sat Oct 15 23:49:04 2011] ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_src.evt and ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Sat Oct 15 23:49:04 2011] Size of ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_src.evt.gz[events] = 21 counts
[Sat Oct 15 23:49:04 2011] Mean chipx,y = (596.57, 932.00)
[Sat Oct 15 23:49:04 2011] Mean tdetx,y = (4200.00, 3657.57)
[Sat Oct 15 23:49:04 2011] chipx,y range = (578.00-608.00, 920.00-951.00)
[Sat Oct 15 23:49:04 2011] Size of ../../acisf11752/products/events/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 84 counts
[Sat Oct 15 23:49:04 2011] ../../acisf11752/products/images/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_src.img and ../../acisf11752/products/images/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Sat Oct 15 23:49:04 2011] ../../acisf11752/products/spectra/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_src.pi and ../../acisf11752/products/spectra/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Sat Oct 15 23:49:04 2011] Not generating rmf since there are only 13 counts
[Sat Oct 15 23:49:06 2011] ../../acisf11752/products/lightcurves/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_src.lc and ../../acisf11752/products/lightcurves/fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Sat Oct 15 23:49:16 2011] 199.789
[Sat Oct 15 23:49:33 2011] Updating aperture counts using extracted products
[Sat Oct 15 23:49:33 2011] Error reading totcts from fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23_src.pi.gz
[Sat Oct 15 23:49:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 23:49:33 2011] Using photon index=1.80, rate=0.000143, arf fullrun_ccd3_acisf11752_pi14-548_pass1_cl_src23.arf
[Sat Oct 15 23:49:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 23:49:33 2011] Updating source flux to 1.7e-15
[Sat Oct 15 23:49:55 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting