[Sat Oct 15 23:38:00 2011] Detection parameters:
  Position = (611.3, 1109.9) = 20 6 42.27 -48 23 28.1
  Extent = 1.7" x 1.3", rotation angle = 131 degrees
  Source counts = 40.9 +/- 7.5
  Background counts = 15.1
  Rate = 0.0004 +/- 8e-05

[Sat Oct 15 23:38:00 2011] Off-axis axis estimate = 6.77'
[Sat Oct 15 23:39:31 2011] Using EEF radius (= 2.05 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:39:31 2011] Initial guess for spatial extent in simple fitting = 2.05"
[Sat Oct 15 23:39:31 2011] source mask rpix=4.2, npix_max = 86, mask sum = 90, frac = 1.037
[Sat Oct 15 23:39:31 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 2.05"
[Sat Oct 15 23:39:32 2011] fullrun_ccd1_acisf11752_pi14-548_cl_pass0_src15.ximg exists
[Sat Oct 15 23:39:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11752_pi14-548_cl_pass0_src15.csv
[Sat Oct 15 23:39:32 2011] fullrun_ccd1_acisf11752_pi14-548_cl_pass0_src15_1.ximg exists
[Sat Oct 15 23:39:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11752_pi14-548_cl_pass0_src15.csv
[Sat Oct 15 23:39:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11752_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11752_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:39:34 2011] fullrun_ccd1_acisf11752_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sat Oct 15 23:39:34 2011] fullrun_ccd1_acisf11752_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Oct 15 23:39:34 2011] Fit fullrun_ccd1_acisf11752_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Oct 15 23:39:56 2011] Spatial fit model total counts = 65.998500, observed total counts = 66.000000
[Sat Oct 15 23:39:56 2011] Offset between fit and detection position for source 23 = 1.351542 pixels
[Sat Oct 15 23:39:56 2011] 66.680700 total counts/ 31.876500 bgd. counts: snr = 6.164478
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.351542 pixels
  Position = (611.5, 1111.2) = 20 6 42.28 -48 23 27.7
  Extent = 1.3 (1.0-1.7)", rotation angle = 0
  Source counts = 34.8 +/- 8.2
  Background counts = 31.9
  Rate = 0.0004 +/- 9e-05
[Sat Oct 15 23:39:56 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:39:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:39:56 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:39:56 2011] Source does appear to be extended
[Sat Oct 15 23:39:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:40:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:40:37 2011] Initial guess for spatial extent in simple fitting = 1.29"
[Sat Oct 15 23:40:37 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.082
[Sat Oct 15 23:40:37 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 1.29"
[Sat Oct 15 23:40:38 2011] fullrun_ccd1_acisf11752_pi14-548_cl_pass1_src15.ximg exists
[Sat Oct 15 23:40:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11752_pi14-548_cl_pass1_src15.csv
[Sat Oct 15 23:40:38 2011] fullrun_ccd1_acisf11752_pi14-548_cl_pass1_src15_1.ximg exists
[Sat Oct 15 23:40:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11752_pi14-548_cl_pass1_src15.csv
[Sat Oct 15 23:40:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11752_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11752_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:40:38 2011] fullrun_ccd1_acisf11752_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sat Oct 15 23:40:38 2011] fullrun_ccd1_acisf11752_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Oct 15 23:40:38 2011] Fit fullrun_ccd1_acisf11752_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Oct 15 23:40:57 2011] Spatial fit model total counts = 47.889100, observed total counts = 48.000000
[Sat Oct 15 23:40:57 2011] Offset between fit and detection position for source 23 = 0.336865 pixels
[Sat Oct 15 23:40:57 2011] 49.007300 total counts/ 15.692400 bgd. counts: snr = 8.409958
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.336865 pixels
  Position = (611.2, 1111.3) = 20 6 42.30 -48 23 27.6
  Extent = 1.3 (0.9-1.6)", rotation angle = 0
  Source counts = 33.3 +/- 7.0
  Background counts = 15.7
  Rate = 0.0004 +/- 7e-05
[Sat Oct 15 23:40:57 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:40:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:40:57 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:40:57 2011] Source does appear to be extended
[Sat Oct 15 23:40:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:42:36 2011] Not overwriting source region fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_src.reg
[Sat Oct 15 23:42:36 2011] Extracting stamp from image fullrun_ccd1_acisf11752_pi14-548_cl_sm2.00.img.gz, (553, 1053) - (669, 1169)
[Sat Oct 15 23:42:36 2011] Writing fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23.gif
[Sat Oct 15 23:43:17 2011] ../../acisf11752/products/events/fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_src.evt and ../../acisf11752/products/events/fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Sat Oct 15 23:43:17 2011] Size of ../../acisf11752/products/events/fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_src.evt.gz[events] = 51 counts
[Sat Oct 15 23:43:17 2011] Mean chipx,y = (130.63, 370.20)
[Sat Oct 15 23:43:17 2011] Mean tdetx,y = (4761.80, 4237.63)
[Sat Oct 15 23:43:17 2011] chipx,y range = (109.00-148.00, 353.00-392.00)
[Sat Oct 15 23:43:17 2011] Size of ../../acisf11752/products/events/fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 166 counts
[Sat Oct 15 23:43:17 2011] ../../acisf11752/products/images/fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_src.img and ../../acisf11752/products/images/fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Sat Oct 15 23:43:17 2011] ../../acisf11752/products/spectra/fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_src.pi and ../../acisf11752/products/spectra/fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Sat Oct 15 23:43:17 2011] Not generating rmf since there are only 33 counts
[Sat Oct 15 23:43:20 2011] ../../acisf11752/products/lightcurves/fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_src.lc and ../../acisf11752/products/lightcurves/fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Sat Oct 15 23:43:55 2011] 183.39
[Sat Oct 15 23:49:30 2011] Updating aperture counts using extracted products
[Sat Oct 15 23:49:30 2011] Error reading totcts from fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23_src.pi.gz
[Sat Oct 15 23:49:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 23:49:30 2011] Using photon index=1.80, rate=0.000356, arf fullrun_ccd1_acisf11752_pi14-548_pass1_cl_src23.arf
[Sat Oct 15 23:49:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 23:49:30 2011] Updating source flux to 4.5e-15
[Sat Oct 15 23:49:44 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting