[Sat Oct 15 23:37:57 2011] Detection parameters:
  Position = (884.7, 657.5) = 20 7 11.41 -48 32 7.2
  Extent = 2.4" x 1.8", rotation angle = 106 degrees
  Source counts = 146.6 +/- 15.4
  Background counts = 90.4
  Rate = 0.002 +/- 0.0002

[Sat Oct 15 23:37:58 2011] Off-axis axis estimate = 9.27'
[Sat Oct 15 23:39:29 2011] Using EEF radius (= 3.80 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:39:29 2011] Initial guess for spatial extent in simple fitting = 3.80"
[Sat Oct 15 23:39:29 2011] source mask rpix=7.7, npix_max = 269, mask sum = 272, frac = 1.008
[Sat Oct 15 23:39:29 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.80"
[Sat Oct 15 23:39:30 2011] fullrun_ccd0_acisf11752_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 15 23:39:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11752_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 23:39:30 2011] fullrun_ccd0_acisf11752_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 15 23:39:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11752_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 23:39:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11752_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11752_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:39:31 2011] fullrun_ccd0_acisf11752_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 15 23:39:31 2011] fullrun_ccd0_acisf11752_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 15 23:39:31 2011] Fit fullrun_ccd0_acisf11752_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 15 23:39:52 2011] Spatial fit model total counts = 226.994000, observed total counts = 227.000000
[Sat Oct 15 23:39:52 2011] Offset between fit and detection position for source 3 = 1.296903 pixels
[Sat Oct 15 23:39:52 2011] 224.955000 total counts/ 122.205000 bgd. counts: snr = 9.294742
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.296903 pixels
  Position = (885.2, 658.8) = 20 7 11.41 -48 32 6.9
  Extent = 2.6 (2.1-3.4)", rotation angle = 0
  Source counts = 102.8 +/- 15.0
  Background counts = 122.2
  Rate = 0.001 +/- 0.0002
[Sat Oct 15 23:39:52 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:39:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:39:52 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:39:52 2011] Source does appear to be extended
[Sat Oct 15 23:39:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:40:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 23:40:35 2011] Initial guess for spatial extent in simple fitting = 2.65"
[Sat Oct 15 23:40:35 2011] source mask rpix=5.4, npix_max = 138, mask sum = 144, frac = 1.041
[Sat Oct 15 23:40:35 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.65"
[Sat Oct 15 23:40:35 2011] fullrun_ccd0_acisf11752_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 15 23:40:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11752_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 23:40:35 2011] fullrun_ccd0_acisf11752_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 15 23:40:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11752_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 23:40:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11752_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11752_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 23:40:36 2011] fullrun_ccd0_acisf11752_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 15 23:40:36 2011] fullrun_ccd0_acisf11752_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 15 23:40:36 2011] Fit fullrun_ccd0_acisf11752_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 15 23:40:53 2011] Spatial fit model total counts = 163.995000, observed total counts = 164.000000
[Sat Oct 15 23:40:53 2011] Offset between fit and detection position for source 3 = 0.712707 pixels
[Sat Oct 15 23:40:53 2011] 162.067600 total counts/ 74.574800 bgd. counts: snr = 10.131559
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.712707 pixels
  Position = (885.4, 659.4) = 20 7 11.40 -48 32 6.5
  Extent = 2.4 (1.8-3.5)", rotation angle = 0
  Source counts = 87.5 +/- 12.7
  Background counts = 74.6
  Rate = 0.0009 +/- 0.0001
[Sat Oct 15 23:40:53 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 23:40:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 23:40:53 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 23:40:53 2011] Source does appear to be extended
[Sat Oct 15 23:40:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 23:41:33 2011] Not overwriting source region fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 15 23:41:33 2011] Extracting stamp from image fullrun_ccd0_acisf11752_pi14-548_cl_sm2.00.img.gz, (778, 552) - (993, 767)
[Sat Oct 15 23:41:33 2011] Writing fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3.gif
[Sat Oct 15 23:41:40 2011] ../../acisf11752/products/events/fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_src.evt and ../../acisf11752/products/events/fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 15 23:41:40 2011] Size of ../../acisf11752/products/events/fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_src.evt.gz[events] = 167 counts
[Sat Oct 15 23:41:40 2011] Mean chipx,y = (367.62, 606.25)
[Sat Oct 15 23:41:40 2011] Mean tdetx,y = (3667.25, 4764.38)
[Sat Oct 15 23:41:40 2011] chipx,y range = (338.00-402.00, 572.00-637.00)
[Sat Oct 15 23:41:40 2011] Size of ../../acisf11752/products/events/fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 494 counts
[Sat Oct 15 23:41:40 2011] ../../acisf11752/products/images/fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_src.img and ../../acisf11752/products/images/fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 15 23:41:40 2011] ../../acisf11752/products/spectra/fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_src.pi and ../../acisf11752/products/spectra/fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct 15 23:41:40 2011] Not generating rmf since there are only 87 counts
[Sat Oct 15 23:41:43 2011] ../../acisf11752/products/lightcurves/fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_src.lc and ../../acisf11752/products/lightcurves/fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 15 23:42:35 2011] 166.304
[Sat Oct 15 23:49:29 2011] Updating aperture counts using extracted products
[Sat Oct 15 23:49:29 2011] Error reading totcts from fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 15 23:49:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 23:49:30 2011] Using photon index=1.80, rate=0.000936, arf fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3.arf
[Sat Oct 15 23:49:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 23:49:30 2011] Updating source flux to 1.3e-14
[Sat Oct 15 23:49:40 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 23:49:44 2011] acisf11752/analysis//spectral/fullrun_ccd0_acisf11752_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete