[Sat Oct 22 22:59:01 2011] Detection parameters:
  Position = (854.0, 766.3) = 14 1 35.20 -11 43 11.4
  Extent = 0.9" x 0.7", rotation angle = 24 degrees
  Source counts = 17.1 +/- 4.4
  Background counts = 1.9
  Rate = 0.0003 +/- 7e-05

[Sat Oct 22 22:59:02 2011] Off-axis axis estimate = 4.18'
[Sun Oct 23 00:03:52 2011] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 00:03:52 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Sun Oct 23 00:03:52 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.947
[Sun Oct 23 00:03:52 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.88"
[Sun Oct 23 00:20:15 2011] fullrun_ccd2_acisf11750_pi14-548_cl_pass0_src9.ximg exists
[Sun Oct 23 00:20:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11750_pi14-548_cl_pass0_src9.csv
[Sun Oct 23 00:20:15 2011] fullrun_ccd2_acisf11750_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Oct 23 00:20:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11750_pi14-548_cl_pass0_src9.csv
[Sun Oct 23 00:20:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11750_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11750_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 00:20:15 2011] fullrun_ccd2_acisf11750_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Oct 23 00:20:15 2011] fullrun_ccd2_acisf11750_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Oct 23 00:20:15 2011] Fit fullrun_ccd2_acisf11750_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Oct 23 00:51:50 2011] Spatial fit model total counts = 22.954200, observed total counts = 23.000000
[Sun Oct 23 00:51:50 2011] Offset between fit and detection position for source 10 = 0.854979 pixels
[Sun Oct 23 00:51:50 2011] 22.504950 total counts/ 6.147450 bgd. counts: snr = 6.597349
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.854979 pixels
  Position = (854.6, 766.9) = 14 1 35.20 -11 43 11.3
  Extent = 1.0 (0.6-1.4)", rotation angle = 0
  Source counts = 16.4 +/- 4.7
  Background counts = 6.1
  Rate = 0.0003 +/- 8e-05
[Sun Oct 23 00:51:50 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 00:51:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 00:51:50 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 00:51:50 2011] Source does appear to be extended
[Sun Oct 23 00:51:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 01:45:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 01:45:24 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Sun Oct 23 01:45:24 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040
[Sun Oct 23 01:45:24 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.96"
[Sun Oct 23 01:59:19 2011] fullrun_ccd2_acisf11750_pi14-548_cl_pass1_src9.ximg exists
[Sun Oct 23 01:59:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11750_pi14-548_cl_pass1_src9.csv
[Sun Oct 23 01:59:19 2011] fullrun_ccd2_acisf11750_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Oct 23 01:59:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11750_pi14-548_cl_pass1_src9.csv
[Sun Oct 23 01:59:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11750_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11750_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 01:59:19 2011] fullrun_ccd2_acisf11750_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Oct 23 01:59:19 2011] fullrun_ccd2_acisf11750_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Oct 23 01:59:19 2011] Fit fullrun_ccd2_acisf11750_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Oct 23 02:26:45 2011] Spatial fit model total counts = 21.822800, observed total counts = 22.000000
[Sun Oct 23 02:26:45 2011] Offset between fit and detection position for source 10 = 0.021795 pixels
[Sun Oct 23 02:26:45 2011] 21.447970 total counts/ 5.338670 bgd. counts: snr = 6.972044
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.021795 pixels
  Position = (854.6, 766.9) = 14 1 35.20 -11 43 11.3
  Extent = 1.0 (0.6-1.4)", rotation angle = 0
  Source counts = 16.1 +/- 4.6
  Background counts = 5.3
  Rate = 0.0003 +/- 8e-05
[Sun Oct 23 02:26:45 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 02:26:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 02:26:45 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 02:26:45 2011] Source does appear to be extended
[Sun Oct 23 02:26:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 02:40:51 2011] Writing source region out to fullrun_ccd2_acisf11750_pi14-548_pass1_cl_src10_src.reg
[Sun Oct 23 02:40:51 2011] Extracting stamp from image fullrun_ccd2_acisf11750_pi14-548_cl_sm2.00.img.gz, (810, 723) - (899, 811)
[Sun Oct 23 02:40:51 2011] Writing fullrun_ccd2_acisf11750_pi14-548_pass1_cl_src10.gif
[Sun Oct 23 02:45:32 2011] Size of ../../acisf11750/products/events/fullrun_ccd2_acisf11750_pi14-548_pass1_cl_src10_src.evt.gz[events] = 21 counts
[Sun Oct 23 02:45:32 2011] Mean chipx,y = (299.90, 536.24)
[Sun Oct 23 02:45:32 2011] Mean tdetx,y = (3597.24, 3786.10)
[Sun Oct 23 02:45:32 2011] chipx,y range = (286.00-321.00, 518.00-555.00)
[Sun Oct 23 02:45:32 2011] Size of ../../acisf11750/products/events/fullrun_ccd2_acisf11750_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 33 counts
[Sun Oct 23 02:45:33 2011] Not generating rmf since there are only 16 counts
[Sun Oct 23 02:45:33 2011] arf not found, will run specextract
[Sun Oct 23 02:46:02 2011] ../../acisf11750/products/spectra/fullrun_ccd2_acisf11750_pi14-548_pass1_cl_src10.warf not found
[Sun Oct 23 02:46:02 2011] ../../acisf11750/products/spectra/fullrun_ccd2_acisf11750_pi14-548_pass1_cl_src10.wrmf not found
[Sun Oct 23 02:46:02 2011] Removal of ../../acisf11750/products/spectra/fullrun_ccd2_acisf11750_pi14-548_pass1_cl_src10.soff failed
[Sun Oct 23 02:53:24 2011] Spectrum 10 has only 16 counts, deleting rmf
[Sun Oct 23 02:53:24 2011] 188.718
[Sun Oct 23 03:09:30 2011] Updating aperture counts using extracted products
[Sun Oct 23 03:09:30 2011] Error reading totcts from fullrun_ccd2_acisf11750_pi14-548_pass1_cl_src10_src.pi.gz
[Sun Oct 23 03:09:31 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 03:09:31 2011] Using photon index=1.80, rate=0.000274, arf fullrun_ccd2_acisf11750_pi14-548_pass1_cl_src10.arf
[Sun Oct 23 03:09:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 03:09:31 2011] Updating source flux to 3.3e-15
[Sun Oct 23 03:09:36 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 03:09:37 2011] acisf11750/analysis//spectral/fullrun_ccd2_acisf11750_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete