[Sat Oct 29 21:54:50 2011] Detection parameters:
  Position = (917.4, 521.4) = 5 34 5.92 -50 9 57.9
  Extent = 2.7" x 2.2", rotation angle = 127 degrees
  Source counts = 10.5 +/- 3.9
  Background counts = 4.5
  Rate = 0.0004 +/- 0.0002

[Sat Oct 29 21:54:50 2011] Off-axis axis estimate = 8.40'
[Sat Oct 29 21:55:32 2011] Using EEF radius (= 3.12 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 21:55:32 2011] Initial guess for spatial extent in simple fitting = 3.12"
[Sat Oct 29 21:55:32 2011] source mask rpix=6.3, npix_max = 186, mask sum = 155, frac = 0.829
[Sat Oct 29 21:55:32 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 3.12"
[Sat Oct 29 21:55:32 2011] fullrun_ccd1_acisf11748_pi14-548_cl_pass0_src6.ximg exists
[Sat Oct 29 21:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11748_pi14-548_cl_pass0_src6.csv
[Sat Oct 29 21:55:32 2011] fullrun_ccd1_acisf11748_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Oct 29 21:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11748_pi14-548_cl_pass0_src6.csv
[Sat Oct 29 21:55:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11748_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11748_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 21:55:32 2011] fullrun_ccd1_acisf11748_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Oct 29 21:55:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11748_pi14-548_cl_pass0_tfrozen_src6.csv
[Sat Oct 29 21:55:33 2011] fullrun_ccd1_acisf11748_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Oct 29 21:55:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11748_pi14-548_cl_pass0_tfrozen_src6.csv
[Sat Oct 29 21:55:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11748_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11748_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 21:55:40 2011] Source 4 is offset by -4.611081 and -0.888874 pixels which is larger than
2 X fitted extent = 3.167707 x 3.167707, not incorporating fit results
[Sat Oct 29 21:55:40 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 21:55:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 21:55:40 2011] Assessing source extent using major
[Sat Oct 29 21:55:40 2011] Source does appear to be extended
[Sat Oct 29 21:55:40 2011] Computing asymmetry using major and minor axis, asym = 1.24
[Sat Oct 29 21:55:40 2011] Deleting source due to low Poisson probability 0.9