[Thu Oct 27 10:17:33 2011] Detection parameters:
  Position = (648.5, 589.3) = 5 27 50.48 -53 0 18.3
  Extent = 0.8" x 0.5", rotation angle = 47 degrees
  Source counts = 14.5 +/- 3.9
  Background counts = 0.5
  Rate = 0.0008 +/- 0.0002

[Thu Oct 27 10:17:33 2011] Off-axis axis estimate = 4.20'
[Thu Oct 27 11:02:24 2011] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 11:02:24 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Thu Oct 27 11:02:24 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.170
[Thu Oct 27 11:02:24 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.89"
[Thu Oct 27 11:16:00 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass0_src6.ximg exists
[Thu Oct 27 11:16:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11747_pi14-548_cl_pass0_src6.csv
[Thu Oct 27 11:16:00 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass0_src6_1.ximg exists
[Thu Oct 27 11:16:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11747_pi14-548_cl_pass0_src6.csv
[Thu Oct 27 11:16:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11747_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11747_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 11:16:01 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Thu Oct 27 11:16:01 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Oct 27 11:16:01 2011] Fit fullrun_ccd3_acisf11747_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Oct 27 11:23:30 2011] Spatial fit model total counts = 17.533100, observed total counts = 18.000000
[Thu Oct 27 11:23:30 2011] Offset between fit and detection position for source 3 = 1.075329 pixels
[Thu Oct 27 11:23:30 2011] 16.938300 total counts/ 3.843000 bgd. counts: snr = 6.680058
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.075329 pixels
  Position = (649.2, 590.1) = 5 27 50.46 -53 0 18.2
  Extent = 0.8 (0.2-1.1)", rotation angle = 0
  Source counts = 13.1 +/- 4.1
  Background counts = 3.8
  Rate = 0.0007 +/- 0.0002
[Thu Oct 27 11:23:30 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 11:23:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 11:23:30 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 11:23:30 2011] Source does appear to be extended
[Thu Oct 27 11:23:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 12:09:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 12:09:11 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Thu Oct 27 12:09:11 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.921
[Thu Oct 27 12:09:11 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.78"
[Thu Oct 27 12:23:09 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src6.ximg exists
[Thu Oct 27 12:23:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src6.csv
[Thu Oct 27 12:23:09 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src6_1.ximg exists
[Thu Oct 27 12:23:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src6.csv
[Thu Oct 27 12:23:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 12:23:09 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Thu Oct 27 12:23:09 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Oct 27 12:23:09 2011] Fit fullrun_ccd3_acisf11747_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Oct 27 12:31:52 2011] Spatial fit model total counts = 17.987800, observed total counts = 18.000000
[Thu Oct 27 12:31:52 2011] Offset between fit and detection position for source 3 = 0.048092 pixels
[Thu Oct 27 12:31:52 2011] 17.852050 total counts/ 5.266650 bgd. counts: snr = 5.484030
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.048092 pixels
  Position = (649.2, 590.1) = 5 27 50.47 -53 0 18.2
  Extent = 0.7 (0.2-1.1)", rotation angle = 0
  Source counts = 12.6 +/- 4.2
  Background counts = 5.3
  Rate = 0.0007 +/- 0.0002
[Thu Oct 27 12:31:52 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 12:31:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 12:31:52 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 12:31:52 2011] Source does appear to be extended
[Thu Oct 27 12:31:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 12:51:56 2011] Writing source region out to fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src3_src.reg
[Thu Oct 27 12:51:56 2011] Extracting stamp from image fullrun_ccd3_acisf11747_pi14-548_cl_sm2.00.img.gz, (615, 556) - (683, 624)
[Thu Oct 27 12:51:56 2011] Writing fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src3.gif
[Thu Oct 27 12:54:11 2011] Size of ../../acisf11747/products/events/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src3_src.evt.gz[events] = 15 counts
[Thu Oct 27 12:54:11 2011] Mean chipx,y = (389.93, 565.53)
[Thu Oct 27 12:54:11 2011] Mean tdetx,y = (4566.47, 3450.93)
[Thu Oct 27 12:54:11 2011] chipx,y range = (374.00-408.00, 552.00-587.00)
[Thu Oct 27 12:54:11 2011] Size of ../../acisf11747/products/events/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 7 counts
[Thu Oct 27 12:54:12 2011] Not generating rmf since there are only 12 counts
[Thu Oct 27 12:54:12 2011] arf not found, will run specextract
[Thu Oct 27 12:54:37 2011] ../../acisf11747/products/spectra/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src3.warf not found
[Thu Oct 27 12:54:37 2011] ../../acisf11747/products/spectra/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src3.wrmf not found
[Thu Oct 27 12:54:37 2011] Removal of ../../acisf11747/products/spectra/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src3.soff failed
[Thu Oct 27 13:02:08 2011] Spectrum 3 has only 13 counts, deleting rmf
[Thu Oct 27 13:02:08 2011] 189.412
[Thu Oct 27 13:03:34 2011] Updating aperture counts using extracted products
[Thu Oct 27 13:03:34 2011] Error reading totcts from fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Oct 27 13:03:34 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 13:03:34 2011] Using photon index=1.80, rate=0.000659, arf fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src3.arf
[Thu Oct 27 13:03:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 13:03:34 2011] Updating source flux to 8.3e-15
[Thu Oct 27 13:03:40 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 13:03:41 2011] acisf11747/analysis//spectral/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete