[Thu Oct 27 10:17:33 2011] Detection parameters:
  Position = (124.5, 982.6) = 5 28 19.02 -52 57 4.8
  Extent = 0.5" x 0.5", rotation angle = 156 degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.2
  Rate = 0.0006 +/- 0.0002

[Thu Oct 27 10:17:33 2011] Off-axis axis estimate = 2.34'
[Thu Oct 27 11:02:24 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 11:02:24 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Thu Oct 27 11:02:24 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.064
[Thu Oct 27 11:02:24 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.47"
[Thu Oct 27 11:16:01 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass0_src12.ximg exists
[Thu Oct 27 11:16:01 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass0_src12_1.ximg exists
[Thu Oct 27 11:16:01 2011] Fit fullrun_ccd3_acisf11747_pi14-548_cl_pass0_src12 appears to have run properly
[Thu Oct 27 11:16:01 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Thu Oct 27 11:16:01 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Oct 27 11:16:01 2011] Fit fullrun_ccd3_acisf11747_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Oct 27 11:23:30 2011] Spatial fit model total counts = 13.284700, observed total counts = 13.000000
[Thu Oct 27 11:23:30 2011] Offset between fit and detection position for source 13 = 0.666567 pixels
[Thu Oct 27 11:23:30 2011] 13.511100 total counts/ 2.880200 bgd. counts: snr = 6.264100
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.666567 pixels
  Position = (124.9, 983.1) = 5 28 19.02 -52 57 4.8
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 10.6 +/- 3.7
  Background counts = 2.9
  Rate = 0.0006 +/- 0.0002
[Thu Oct 27 11:23:30 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 11:23:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 11:23:30 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 11:23:30 2011] Source does appear to be extended
[Thu Oct 27 11:23:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 12:09:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 12:09:11 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Thu Oct 27 12:09:11 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.390
[Thu Oct 27 12:09:11 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.59"
[Thu Oct 27 12:23:09 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src12.ximg exists
[Thu Oct 27 12:23:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src12.csv
[Thu Oct 27 12:23:09 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src12_1.ximg exists
[Thu Oct 27 12:23:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src12.csv
[Thu Oct 27 12:23:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11747_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 12:23:09 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Thu Oct 27 12:23:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11747_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Oct 27 12:23:09 2011] fullrun_ccd3_acisf11747_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Oct 27 12:23:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11747_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Oct 27 12:23:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11747_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11747_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 12:31:52 2011] Spatial fit model total counts = 11.940200, observed total counts = 13.000000
[Thu Oct 27 12:31:52 2011] Offset between fit and detection position for source 13 = 0.083164 pixels
[Thu Oct 27 12:31:52 2011] 11.682060 total counts/ 1.684270 bgd. counts: snr = 7.703679
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.083164 pixels
  Position = (125.0, 983.1) = 5 28 19.02 -52 57 4.8
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 10.0 +/- 3.4
  Background counts = 1.7
  Rate = 0.0005 +/- 0.0002
[Thu Oct 27 12:31:52 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 12:31:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 12:31:52 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 12:31:52 2011] Source does appear to be extended
[Thu Oct 27 12:31:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 12:51:56 2011] Writing source region out to fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src13_src.reg
[Thu Oct 27 12:51:56 2011] Extracting stamp from image fullrun_ccd3_acisf11747_pi14-548_cl_sm2.00.img.gz, (97, 955) - (153, 1011)
[Thu Oct 27 12:51:56 2011] Writing fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src13.gif
[Thu Oct 27 12:57:39 2011] Size of ../../acisf11747/products/events/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src13_src.evt.gz[events] = 11 counts
[Thu Oct 27 12:57:39 2011] Mean chipx,y = (903.00, 969.18)
[Thu Oct 27 12:57:39 2011] Mean tdetx,y = (4162.82, 3964.00)
[Thu Oct 27 12:57:39 2011] chipx,y range = (892.00-922.00, 959.00-992.00)
[Thu Oct 27 12:57:39 2011] Size of ../../acisf11747/products/events/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 3 counts
[Thu Oct 27 12:57:40 2011] Not generating rmf since there are only 9 counts
[Thu Oct 27 12:57:40 2011] arf not found, will run specextract
[Thu Oct 27 12:58:13 2011] ../../acisf11747/products/spectra/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src13.warf not found
[Thu Oct 27 12:58:13 2011] ../../acisf11747/products/spectra/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src13.wrmf not found
[Thu Oct 27 12:58:13 2011] Removal of ../../acisf11747/products/spectra/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src13.soff failed
[Thu Oct 27 13:02:08 2011] Spectrum 13 has only 10 counts, deleting rmf
[Thu Oct 27 13:02:08 2011] 201.748
[Thu Oct 27 13:03:34 2011] Updating aperture counts using extracted products
[Thu Oct 27 13:03:34 2011] Error reading totcts from fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src13_src.pi.gz
[Thu Oct 27 13:03:34 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 13:03:34 2011] Using photon index=1.80, rate=0.000523, arf fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src13.arf
[Thu Oct 27 13:03:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 13:03:34 2011] Updating source flux to 6e-15
[Thu Oct 27 13:03:40 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 13:03:41 2011] acisf11747/analysis//spectral/fullrun_ccd3_acisf11747_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete