[Thu Oct 27 10:17:10 2011] Detection parameters:
  Position = (695.2, 277.8) = 5 27 49.16 -52 54 19.4
  Extent = 0.5" x 0.5", rotation angle = 37 degrees
  Source counts = 24.5 +/- 5.0
  Background counts = 0.5
  Rate = 0.001 +/- 0.0003

[Thu Oct 27 10:17:11 2011] Off-axis axis estimate = 3.18'
[Thu Oct 27 10:49:50 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 10:49:50 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Thu Oct 27 10:49:50 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.972
[Thu Oct 27 10:49:50 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.62"
[Thu Oct 27 11:02:24 2011] fullrun_ccd2_acisf11747_pi14-548_cl_pass0_src5.ximg exists
[Thu Oct 27 11:02:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11747_pi14-548_cl_pass0_src5.csv
[Thu Oct 27 11:02:24 2011] fullrun_ccd2_acisf11747_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Oct 27 11:02:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11747_pi14-548_cl_pass0_src5.csv
[Thu Oct 27 11:02:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11747_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11747_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 11:02:24 2011] fullrun_ccd2_acisf11747_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Oct 27 11:02:24 2011] fullrun_ccd2_acisf11747_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Oct 27 11:02:24 2011] Fit fullrun_ccd2_acisf11747_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Oct 27 11:23:28 2011] Spatial fit model total counts = 28.892900, observed total counts = 29.000000
[Thu Oct 27 11:23:28 2011] Offset between fit and detection position for source 6 = 0.538460 pixels
[Thu Oct 27 11:23:28 2011] 29.038160 total counts/ 5.611560 bgd. counts: snr = 9.889343
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.538460 pixels
  Position = (695.5, 278.3) = 5 27 49.17 -52 54 19.4
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 23.4 +/- 5.4
  Background counts = 5.6
  Rate = 0.001 +/- 0.0003
[Thu Oct 27 11:23:28 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 11:23:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 11:23:28 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 11:23:28 2011] Source does appear to be extended
[Thu Oct 27 11:23:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 11:54:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 11:54:51 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Thu Oct 27 11:54:51 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.901
[Thu Oct 27 11:54:51 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.53"
[Thu Oct 27 12:09:11 2011] fullrun_ccd2_acisf11747_pi14-548_cl_pass1_src5.ximg exists
[Thu Oct 27 12:09:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11747_pi14-548_cl_pass1_src5.csv
[Thu Oct 27 12:09:11 2011] fullrun_ccd2_acisf11747_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Oct 27 12:09:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11747_pi14-548_cl_pass1_src5.csv
[Thu Oct 27 12:09:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11747_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11747_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 12:09:11 2011] fullrun_ccd2_acisf11747_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Oct 27 12:09:11 2011] fullrun_ccd2_acisf11747_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Oct 27 12:09:11 2011] Fit fullrun_ccd2_acisf11747_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Oct 27 12:31:50 2011] Spatial fit model total counts = 29.077300, observed total counts = 29.000000
[Thu Oct 27 12:31:50 2011] Offset between fit and detection position for source 6 = 0.015051 pixels
[Thu Oct 27 12:31:50 2011] 29.235760 total counts/ 5.844160 bgd. counts: snr = 9.676067
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.015051 pixels
  Position = (695.5, 278.3) = 5 27 49.17 -52 54 19.4
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 23.4 +/- 5.4
  Background counts = 5.8
  Rate = 0.001 +/- 0.0003
[Thu Oct 27 12:31:50 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 12:31:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 12:31:50 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 12:31:50 2011] Source does appear to be extended
[Thu Oct 27 12:31:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 12:41:38 2011] Writing source region out to fullrun_ccd2_acisf11747_pi14-548_pass1_cl_src6_src.reg
[Thu Oct 27 12:41:38 2011] Extracting stamp from image fullrun_ccd2_acisf11747_pi14-548_cl_sm2.00.img.gz, (672, 255) - (719, 302)
[Thu Oct 27 12:41:38 2011] Writing fullrun_ccd2_acisf11747_pi14-548_pass1_cl_src6.gif
[Thu Oct 27 12:44:02 2011] Size of ../../acisf11747/products/events/fullrun_ccd2_acisf11747_pi14-548_pass1_cl_src6_src.evt.gz[events] = 25 counts
[Thu Oct 27 12:44:02 2011] Mean chipx,y = (670.24, 771.64)
[Thu Oct 27 12:44:02 2011] Mean tdetx,y = (3832.64, 3415.76)
[Thu Oct 27 12:44:02 2011] chipx,y range = (654.00-690.00, 752.00-787.00)
[Thu Oct 27 12:44:02 2011] Size of ../../acisf11747/products/events/fullrun_ccd2_acisf11747_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 5 counts
[Thu Oct 27 12:44:03 2011] Not generating rmf since there are only 23 counts
[Thu Oct 27 12:44:03 2011] arf not found, will run specextract
[Thu Oct 27 12:44:31 2011] ../../acisf11747/products/spectra/fullrun_ccd2_acisf11747_pi14-548_pass1_cl_src6.warf not found
[Thu Oct 27 12:44:31 2011] ../../acisf11747/products/spectra/fullrun_ccd2_acisf11747_pi14-548_pass1_cl_src6.wrmf not found
[Thu Oct 27 12:44:31 2011] Removal of ../../acisf11747/products/spectra/fullrun_ccd2_acisf11747_pi14-548_pass1_cl_src6.soff failed
[Thu Oct 27 12:51:56 2011] Spectrum 6 has only 23 counts, deleting rmf
[Thu Oct 27 12:51:56 2011] 185.201
[Thu Oct 27 13:03:34 2011] Updating aperture counts using extracted products
[Thu Oct 27 13:03:34 2011] Error reading totcts from fullrun_ccd2_acisf11747_pi14-548_pass1_cl_src6_src.pi.gz
[Thu Oct 27 13:03:34 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 13:03:34 2011] Using photon index=1.80, rate=0.00122, arf fullrun_ccd2_acisf11747_pi14-548_pass1_cl_src6.arf
[Thu Oct 27 13:03:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 13:03:34 2011] Updating source flux to 1.6e-14
[Thu Oct 27 13:03:39 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 13:03:40 2011] acisf11747/analysis//spectral/fullrun_ccd2_acisf11747_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete