[Sun Oct  2 08:47:08 2011] Detection parameters:
  Position = (521.6, 766.0) = 0 0 27.44 -50 4 21.4
  Extent = 1.4" x 0.9", rotation angle = 16 degrees
  Source counts = 161.3 +/- 12.8
  Background counts = 3.7
  Rate = 0.007 +/- 0.0006

[Sun Oct  2 08:47:09 2011] Off-axis axis estimate = 5.95'
[Sun Oct  2 08:47:58 2011] Using EEF radius (= 1.61 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 08:47:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 08:47:58 2011] Initial guess for spatial extent in simple fitting = 1.61"
[Sun Oct  2 08:47:58 2011] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.989
[Sun Oct  2 08:47:58 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.61"
[Sun Oct  2 08:48:00 2011] fullrun_ccd2_acisf11742_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct  2 08:48:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11742_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 08:48:00 2011] fullrun_ccd2_acisf11742_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct  2 08:48:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11742_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 08:48:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11742_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11742_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 08:48:00 2011] fullrun_ccd2_acisf11742_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct  2 08:48:00 2011] fullrun_ccd2_acisf11742_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct  2 08:48:00 2011] Fit fullrun_ccd2_acisf11742_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct  2 08:48:10 2011] Spatial fit model total counts = 168.463000, observed total counts = 168.000000
[Sun Oct  2 08:48:10 2011] Offset between fit and detection position for source 1 = 0.551794 pixels
[Sun Oct  2 08:48:10 2011] 168.585010 total counts/ 9.957010 bgd. counts: snr = 50.270751
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.551794 pixels
  Position = (522.0, 766.4) = 24 0 27.45 -50 4 21.5
  Extent = 1.5 (1.3-1.6)", rotation angle = 0
  Source counts = 158.6 +/- 13.0
  Background counts = 10.0
  Rate = 0.007 +/- 0.0006
[Sun Oct  2 08:48:10 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 08:48:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 08:48:10 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 08:48:10 2011] Source does appear to be extended
[Sun Oct  2 08:48:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 08:48:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 08:48:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 08:48:38 2011] Initial guess for spatial extent in simple fitting = 1.48"
[Sun Oct  2 08:48:38 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.992
[Sun Oct  2 08:48:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.48"
[Sun Oct  2 08:48:38 2011] fullrun_ccd2_acisf11742_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct  2 08:48:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11742_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 08:48:38 2011] fullrun_ccd2_acisf11742_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct  2 08:48:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11742_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 08:48:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11742_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11742_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 08:48:38 2011] fullrun_ccd2_acisf11742_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct  2 08:48:38 2011] fullrun_ccd2_acisf11742_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct  2 08:48:38 2011] Fit fullrun_ccd2_acisf11742_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct  2 08:48:46 2011] Spatial fit model total counts = 171.050000, observed total counts = 168.000000
[Sun Oct  2 08:48:46 2011] Offset between fit and detection position for source 1 = 0.082638 pixels
[Sun Oct  2 08:48:46 2011] 170.910900 total counts/ 12.606900 bgd. counts: snr = 44.584894
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.082638 pixels
  Position = (521.9, 766.4) = 24 0 27.45 -50 4 21.4
  Extent = 1.4 (1.3-1.6)", rotation angle = 0
  Source counts = 158.3 +/- 13.1
  Background counts = 12.6
  Rate = 0.007 +/- 0.0006
[Sun Oct  2 08:48:46 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 08:48:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 08:48:46 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 08:48:46 2011] Source does appear to be extended
[Sun Oct  2 08:48:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 08:50:21 2011] Not overwriting source region fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_src.reg
[Sun Oct  2 08:50:21 2011] Extracting stamp from image fullrun_ccd2_acisf11742_pi14-548_cl_sm2.00.img.gz, (456, 700) - (588, 832)
[Sun Oct  2 08:50:21 2011] Writing fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1.gif
[Sun Oct  2 08:50:22 2011] ../../acisf11742/products/events/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_src.evt and ../../acisf11742/products/events/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct  2 08:50:22 2011] Size of ../../acisf11742/products/events/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_src.evt.gz[events] = 165 counts
[Sun Oct  2 08:50:22 2011] Mean chipx,y = (466.19, 330.93)
[Sun Oct  2 08:50:22 2011] Mean tdetx,y = (3391.93, 3619.81)
[Sun Oct  2 08:50:22 2011] chipx,y range = (446.00-488.00, 308.00-352.00)
[Sun Oct  2 08:50:22 2011] Size of ../../acisf11742/products/events/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 32 counts
[Sun Oct  2 08:50:22 2011] ../../acisf11742/products/images/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_src.img and ../../acisf11742/products/images/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct  2 08:50:22 2011] ../../acisf11742/products/spectra/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_src.pi and ../../acisf11742/products/spectra/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct  2 08:50:26 2011] ../../acisf11742/products/lightcurves/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_src.lc and ../../acisf11742/products/lightcurves/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct  2 08:51:16 2011] Keeping rmf generated by specextract
[Sun Oct  2 08:51:16 2011] 178.736
[Sun Oct  2 08:52:05 2011] Updating aperture counts using extracted products
[Sun Oct  2 08:52:05 2011] Error reading totcts from fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct  2 08:52:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 08:52:05 2011] Using photon index=1.80, rate=0.00705, arf fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1.arf
[Sun Oct  2 08:52:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 08:52:05 2011] Updating source flux to 9.4e-14
[Sun Oct  2 08:52:12 2011] Reading fit data from acisf11742/analysis//spectral/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct  2 08:52:12 2011] Spectral fit parameter nH value = 2.16547e+13
[Sun Oct  2 08:52:12 2011] Spectral fit parameter PhoIndex value = 1.34473
[Sun Oct  2 08:52:12 2011] Failed to get F(0.3-8.0) from acisf11742/analysis//spectral/fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct  2 08:52:12 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 08:52:12 2011] Using Nh = 2.2e+13, photon index=1.34, rate=0.00705, arf fullrun_ccd2_acisf11742_pi14-548_pass1_cl_src1.arf
[Sun Oct  2 08:52:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 08:52:12 2011] Updating source flux to 1.1e-13