[Sun Oct  2 00:22:48 2011] Detection parameters:
  Position = (865.0, 427.5) = 23 32 40.97 -50 58 10.9
  Extent = 2.8" x 1.8", rotation angle = 19 degrees
  Source counts = 12.4 +/- 3.9
  Background counts = 2.6
  Rate = 0.002 +/- 0.0007

[Sun Oct  2 00:22:48 2011] Off-axis axis estimate = 8.88'
[Sun Oct  2 00:23:28 2011] Using EEF radius (= 3.48 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 00:23:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 00:23:28 2011] Initial guess for spatial extent in simple fitting = 3.48"
[Sun Oct  2 00:23:28 2011] source mask rpix=7.1, npix_max = 229, mask sum = 240, frac = 1.045
[Sun Oct  2 00:23:28 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 3.48"
[Sun Oct  2 00:23:30 2011] fullrun_ccd0_acisf11738_pi14-548_cl_pass0_src2.ximg exists
[Sun Oct  2 00:23:30 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11738_pi14-548_cl_pass0_src2.csv
[Sun Oct  2 00:23:30 2011] fullrun_ccd0_acisf11738_pi14-548_cl_pass0_src2_1.ximg exists
[Sun Oct  2 00:23:30 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11738_pi14-548_cl_pass0_src2.csv
[Sun Oct  2 00:23:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11738_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11738_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 00:23:30 2011] fullrun_ccd0_acisf11738_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sun Oct  2 00:23:30 2011] fullrun_ccd0_acisf11738_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Oct  2 00:23:30 2011] Fit fullrun_ccd0_acisf11738_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Oct  2 00:23:37 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 41.047918 pixels away
[Sun Oct  2 00:23:37 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 00:23:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 00:23:37 2011] Assessing source extent using major
[Sun Oct  2 00:23:37 2011] Source does appear to be extended
[Sun Oct  2 00:23:37 2011] Computing asymmetry using major and minor axis, asym = 1.56
[Sun Oct  2 00:23:37 2011] Source is asymmetric
[Sun Oct  2 00:23:54 2011] Using EEF radius (= 3.48 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 00:23:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 00:23:54 2011] Initial guess for spatial extent in simple fitting = 3.48"
[Sun Oct  2 00:23:54 2011] source mask rpix=7.1, npix_max = 229, mask sum = 240, frac = 1.045
[Sun Oct  2 00:23:54 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 3.48"
[Sun Oct  2 00:23:54 2011] fullrun_ccd0_acisf11738_pi14-548_cl_pass1_src2.ximg exists
[Sun Oct  2 00:23:54 2011] fullrun_ccd0_acisf11738_pi14-548_cl_pass1_src2_1.ximg exists
[Sun Oct  2 00:23:54 2011] Fit fullrun_ccd0_acisf11738_pi14-548_cl_pass1_src2 appears to have run properly
[Sun Oct  2 00:23:55 2011] fullrun_ccd0_acisf11738_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sun Oct  2 00:23:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11738_pi14-548_cl_pass1_tfrozen_src2.csv
[Sun Oct  2 00:23:55 2011] fullrun_ccd0_acisf11738_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Oct  2 00:23:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11738_pi14-548_cl_pass1_tfrozen_src2.csv
[Sun Oct  2 00:23:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11738_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11738_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 00:24:02 2011] Spatial fit model total counts = 13.249800, observed total counts = 15.000000
[Sun Oct  2 00:24:02 2011] Offset between fit and detection position for source 3 = 4.801532 pixels
[Sun Oct  2 00:24:02 2011] 12.961880 total counts/ 2.913780 bgd. counts: snr = 5.886479
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.801532 pixels
  Position = (868.8, 430.4) = 23 32 40.79 -50 58 9.8
  Extent = 1.5 (0.9-2.2)", rotation angle = 0
  Source counts = 10.0 +/- 3.6
  Background counts = 2.9
  Rate = 0.002 +/- 0.0006
[Sun Oct  2 00:24:02 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 00:24:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 00:24:02 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 00:24:02 2011] Source does appear to be extended
[Sun Oct  2 00:24:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 00:24:17 2011] Not overwriting source region fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_src.reg
[Sun Oct  2 00:24:17 2011] Extracting stamp from image fullrun_ccd0_acisf11738_pi14-548_cl_sm2.00.img.gz, (799, 361) - (938, 500)
[Sun Oct  2 00:24:17 2011] Writing fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3.gif
[Sun Oct  2 00:24:22 2011] ../../acisf11738/products/events/fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_src.evt and ../../acisf11738/products/events/fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct  2 00:24:22 2011] Size of ../../acisf11738/products/events/fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_src.evt.gz[events] = 11 counts
[Sun Oct  2 00:24:22 2011] Mean chipx,y = (389.27, 801.00)
[Sun Oct  2 00:24:22 2011] Mean tdetx,y = (3862.00, 4742.73)
[Sun Oct  2 00:24:22 2011] chipx,y range = (371.00-405.00, 789.00-823.00)
[Sun Oct  2 00:24:22 2011] Size of ../../acisf11738/products/events/fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 12 counts
[Sun Oct  2 00:24:22 2011] ../../acisf11738/products/images/fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_src.img and ../../acisf11738/products/images/fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct  2 00:24:22 2011] ../../acisf11738/products/spectra/fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_src.pi and ../../acisf11738/products/spectra/fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Oct  2 00:24:22 2011] Not generating rmf since there are only 10 counts
[Sun Oct  2 00:24:26 2011] ../../acisf11738/products/lightcurves/fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_src.lc and ../../acisf11738/products/lightcurves/fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct  2 00:24:42 2011] 167.761
[Sun Oct  2 00:25:56 2011] Updating aperture counts using extracted products
[Sun Oct  2 00:25:56 2011] Error reading totcts from fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Oct  2 00:25:56 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 00:25:56 2011] Using photon index=1.80, rate=0.00169, arf fullrun_ccd0_acisf11738_pi14-548_pass1_cl_src3.arf
[Sun Oct  2 00:25:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 00:25:56 2011] Updating source flux to 2.3e-14
[Sun Oct  2 00:25:59 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting