[Sat Oct 29 18:44:31 2011] Detection parameters:
  Position = (635.5, 1308.8) = 22 30 50.48 39 23 32.7
  Extent = 1.1" x 0.5", rotation angle = 40 degrees
  Source counts = 24.6 +/- 5.2
  Background counts = 2.4
  Rate = 0.0005 +/- 0.0001

[Sat Oct 29 18:44:32 2011] Off-axis axis estimate = 5.23'
[Sat Oct 29 19:20:18 2011] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 19:20:18 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Sat Oct 29 19:20:18 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.097
[Sat Oct 29 19:20:18 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 1.28"
[Sat Oct 29 19:37:09 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src8.ximg exists
[Sat Oct 29 19:37:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src8.csv
[Sat Oct 29 19:37:09 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src8_1.ximg exists
[Sat Oct 29 19:37:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src8.csv
[Sat Oct 29 19:37:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 19:37:09 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sat Oct 29 19:37:09 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Oct 29 19:37:09 2011] Fit fullrun_ccd6_acisf11737_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Oct 29 20:09:42 2011] Spatial fit model total counts = 27.595700, observed total counts = 30.000000
[Sat Oct 29 20:09:42 2011] Offset between fit and detection position for source 7 = 1.486802 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.486802 pixels
  Position = (636.6, 1309.8) = 22 30 50.45 39 23 33.0
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 26.2 +/- 5.1
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sat Oct 29 20:09:42 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 20:09:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 20:09:42 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 20:09:42 2011] Source does appear to be extended
[Sat Oct 29 20:09:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 20:25:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 20:25:51 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Sat Oct 29 20:25:51 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.016
[Sat Oct 29 20:25:51 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.97"
[Sat Oct 29 20:44:55 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src8.ximg exists
[Sat Oct 29 20:44:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src8.csv
[Sat Oct 29 20:44:55 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src8_1.ximg exists
[Sat Oct 29 20:44:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src8.csv
[Sat Oct 29 20:44:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 20:44:55 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sat Oct 29 20:44:55 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Oct 29 20:44:55 2011] Fit fullrun_ccd6_acisf11737_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Oct 29 21:13:35 2011] Spatial fit model total counts = 31.547200, observed total counts = 32.000000
[Sat Oct 29 21:13:35 2011] Offset between fit and detection position for source 7 = 0.466531 pixels
[Sat Oct 29 21:13:35 2011] 31.705220 total counts/ 9.350320 bgd. counts: snr = 7.310709
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.466531 pixels
  Position = (636.3, 1309.4) = 22 30 50.46 39 23 32.8
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 22.4 +/- 5.6
  Background counts = 9.4
  Rate = 0.0004 +/- 0.0001
[Sat Oct 29 21:13:35 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 21:13:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 21:13:35 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 21:13:35 2011] Source does appear to be extended
[Sat Oct 29 21:13:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 21:14:46 2011] Writing source region out to fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src7_src.reg
[Sat Oct 29 21:14:46 2011] Extracting stamp from image fullrun_ccd6_acisf11737_pi14-548_cl_sm2.00.img.gz, (594, 1268) - (678, 1351)
[Sat Oct 29 21:14:46 2011] Writing fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src7.gif
[Sat Oct 29 21:19:22 2011] Size of ../../acisf11737/products/events/fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src7_src.evt.gz[events] = 27 counts
[Sat Oct 29 21:19:22 2011] Mean chipx,y = (855.48, 1010.04)
[Sat Oct 29 21:19:22 2011] Mean tdetx,y = (3730.48, 2712.04)
[Sat Oct 29 21:19:22 2011] chipx,y range = (838.00-872.00, 999.00-1022.00)
[Sat Oct 29 21:19:22 2011] Size of ../../acisf11737/products/events/fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 21 counts
[Sat Oct 29 21:19:23 2011] Not generating rmf since there are only 22 counts
[Sat Oct 29 21:19:23 2011] arf not found, will run specextract
[Sat Oct 29 21:19:56 2011] ../../acisf11737/products/spectra/fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src7.warf not found
[Sat Oct 29 21:19:56 2011] ../../acisf11737/products/spectra/fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src7.wrmf not found
[Sat Oct 29 21:19:56 2011] Removal of ../../acisf11737/products/spectra/fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src7.soff failed
[Sat Oct 29 21:24:17 2011] Spectrum 7 has only 22 counts, deleting rmf
[Sat Oct 29 21:24:17 2011] 109.281
[Sat Oct 29 21:33:10 2011] Updating aperture counts using extracted products
[Sat Oct 29 21:33:10 2011] Error reading totcts from fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Oct 29 21:33:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 21:33:10 2011] Using photon index=1.80, rate=0.000427, arf fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src7.arf
[Sat Oct 29 21:33:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 21:33:10 2011] Updating source flux to 9e-15
[Sat Oct 29 21:33:14 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting