[Sat Oct 29 18:44:31 2011] Detection parameters:
  Position = (464.6, 1095.8) = 22 30 57.74 39 21 48.0
  Extent = 0.6" x 0.5", rotation angle = 54 degrees
  Source counts = 30.2 +/- 5.7
  Background counts = 2.8
  Rate = 0.0006 +/- 0.0001

[Sat Oct 29 18:44:32 2011] Off-axis axis estimate = 3.36'
[Sat Oct 29 19:20:18 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 19:20:18 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sat Oct 29 19:20:18 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.886
[Sat Oct 29 19:20:18 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.66"
[Sat Oct 29 19:37:09 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src7.ximg exists
[Sat Oct 29 19:37:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src7.csv
[Sat Oct 29 19:37:09 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src7_1.ximg exists
[Sat Oct 29 19:37:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src7.csv
[Sat Oct 29 19:37:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11737_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 19:37:09 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sat Oct 29 19:37:09 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Oct 29 19:37:09 2011] Fit fullrun_ccd6_acisf11737_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Oct 29 20:09:42 2011] Spatial fit model total counts = 33.500000, observed total counts = 33.000000
[Sat Oct 29 20:09:42 2011] Offset between fit and detection position for source 6 = 0.477703 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.477703 pixels
  Position = (465.0, 1096.0) = 22 30 57.74 39 21 47.9
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 33.5 +/- 5.8
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Oct 29 20:09:42 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 20:09:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 20:09:42 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 20:09:42 2011] Source does appear to be extended
[Sat Oct 29 20:09:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 20:25:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 20:25:51 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Sat Oct 29 20:25:51 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.707
[Sat Oct 29 20:25:51 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.92"
[Sat Oct 29 20:44:55 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src7.ximg exists
[Sat Oct 29 20:44:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src7.csv
[Sat Oct 29 20:44:55 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src7_1.ximg exists
[Sat Oct 29 20:44:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src7.csv
[Sat Oct 29 20:44:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11737_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 20:44:55 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sat Oct 29 20:44:55 2011] fullrun_ccd6_acisf11737_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Oct 29 20:44:55 2011] Fit fullrun_ccd6_acisf11737_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Oct 29 21:13:35 2011] Spatial fit model total counts = 33.128000, observed total counts = 34.000000
[Sat Oct 29 21:13:35 2011] Offset between fit and detection position for source 6 = 0.066212 pixels
[Sat Oct 29 21:13:35 2011] 33.419330 total counts/ 1.952430 bgd. counts: snr = 22.519888
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.066212 pixels
  Position = (465.0, 1096.0) = 22 30 57.74 39 21 47.9
  Extent = 0.9 (0.8-1.2)", rotation angle = 0
  Source counts = 31.5 +/- 5.8
  Background counts = 2.0
  Rate = 0.0006 +/- 0.0001
[Sat Oct 29 21:13:35 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 21:13:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 21:13:35 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 21:13:35 2011] Source does appear to be extended
[Sat Oct 29 21:13:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 21:14:46 2011] Writing source region out to fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src6_src.reg
[Sat Oct 29 21:14:46 2011] Extracting stamp from image fullrun_ccd6_acisf11737_pi14-548_cl_sm2.00.img.gz, (423, 1054) - (507, 1138)
[Sat Oct 29 21:14:46 2011] Writing fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src6.gif
[Sat Oct 29 21:18:39 2011] Size of ../../acisf11737/products/events/fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src6_src.evt.gz[events] = 33 counts
[Sat Oct 29 21:18:39 2011] Mean chipx,y = (900.52, 748.27)
[Sat Oct 29 21:18:39 2011] Mean tdetx,y = (3775.52, 2450.27)
[Sat Oct 29 21:18:39 2011] chipx,y range = (888.00-923.00, 734.00-767.00)
[Sat Oct 29 21:18:39 2011] Size of ../../acisf11737/products/events/fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 44 counts
[Sat Oct 29 21:18:40 2011] Not generating rmf since there are only 31 counts
[Sat Oct 29 21:18:40 2011] arf not found, will run specextract
[Sat Oct 29 21:19:13 2011] ../../acisf11737/products/spectra/fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src6.warf not found
[Sat Oct 29 21:19:13 2011] ../../acisf11737/products/spectra/fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src6.wrmf not found
[Sat Oct 29 21:19:13 2011] Removal of ../../acisf11737/products/spectra/fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src6.soff failed
[Sat Oct 29 21:24:17 2011] Spectrum 6 has only 31 counts, deleting rmf
[Sat Oct 29 21:24:17 2011] 202.591
[Sat Oct 29 21:33:10 2011] Updating aperture counts using extracted products
[Sat Oct 29 21:33:10 2011] Error reading totcts from fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src6_src.pi.gz
[Sat Oct 29 21:33:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 21:33:10 2011] Using photon index=1.80, rate=0.000601, arf fullrun_ccd6_acisf11737_pi14-548_pass1_cl_src6.arf
[Sat Oct 29 21:33:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 21:33:10 2011] Updating source flux to 6.4e-15
[Sat Oct 29 21:33:14 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting