[Wed Oct 19 06:38:04 2011] Detection parameters:
  Position = (1001.1, 637.0) = 12 31 13.99 -2 17 4.3
  Extent = 3.5" x 3.4", rotation angle = 105 degrees
  Source counts = 240.9 +/- 20.7
  Background counts = 187.1
  Rate = 0.005 +/- 0.0004

[Wed Oct 19 06:38:04 2011] Off-axis axis estimate = 13.81'
[Wed Oct 19 06:38:55 2011] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 06:38:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 06:38:55 2011] Initial guess for spatial extent in simple fitting = 8.58"
[Wed Oct 19 06:38:55 2011] source mask rpix=17.4, npix_max = 1287, mask sum = 1287, frac = 0.999
[Wed Oct 19 06:38:55 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.58"
[Wed Oct 19 06:38:56 2011] fullrun_ccd3_acisf11731_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 19 06:38:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11731_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 06:38:56 2011] fullrun_ccd3_acisf11731_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 19 06:38:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11731_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 06:38:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11731_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11731_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 06:38:56 2011] fullrun_ccd3_acisf11731_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 19 06:38:56 2011] fullrun_ccd3_acisf11731_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 19 06:38:56 2011] Fit fullrun_ccd3_acisf11731_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 19 06:39:04 2011] Spatial fit model total counts = 606.472000, observed total counts = 610.000000
[Wed Oct 19 06:39:04 2011] Offset between fit and detection position for source 1 = 2.453423 pixels
[Wed Oct 19 06:39:04 2011] 606.607000 total counts/ 228.191000 bgd. counts: snr = 25.050721
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.453423 pixels
  Position = (1003.3, 635.9) = 12 31 13.93 -2 17 5.0
  Extent = 9.7 (8.7-11.0)", rotation angle = 0
  Source counts = 378.4 +/- 24.6
  Background counts = 228.2
  Rate = 0.008 +/- 0.0005
[Wed Oct 19 06:39:04 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 06:39:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 06:39:04 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 06:39:04 2011] Source does appear to be extended
[Wed Oct 19 06:39:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 06:39:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 06:39:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 06:39:22 2011] Initial guess for spatial extent in simple fitting = 9.67"
[Wed Oct 19 06:39:22 2011] source mask rpix=19.7, npix_max = 1624, mask sum = 1585, frac = 0.976
[Wed Oct 19 06:39:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.67"
[Wed Oct 19 06:39:22 2011] fullrun_ccd3_acisf11731_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 19 06:39:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11731_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 06:39:22 2011] fullrun_ccd3_acisf11731_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 19 06:39:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11731_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 06:39:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11731_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11731_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 06:39:22 2011] fullrun_ccd3_acisf11731_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 19 06:39:22 2011] fullrun_ccd3_acisf11731_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 19 06:39:22 2011] Fit fullrun_ccd3_acisf11731_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 19 06:39:30 2011] Warning, spatial fit 1 centroid is now closest to src. 2
[Wed Oct 19 06:39:30 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 06:39:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 06:39:30 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 06:39:30 2011] Source does appear to be extended
[Wed Oct 19 06:39:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 06:39:46 2011] Not overwriting source region fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 19 06:39:46 2011] Extracting stamp from image fullrun_ccd3_acisf11731_pi14-548_cl_sm2.00.img.gz, (561, 194) - (1357, 1078)
[Wed Oct 19 06:39:46 2011] Writing fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1.gif
[Wed Oct 19 06:39:46 2011] ../../acisf11731/products/events/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_src.evt and ../../acisf11731/products/events/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 19 06:39:47 2011] Size of ../../acisf11731/products/events/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_src.evt.gz[events] = 609 counts
[Wed Oct 19 06:39:47 2011] Mean chipx,y = (794.47, 686.98)
[Wed Oct 19 06:39:47 2011] Mean tdetx,y = (4445.02, 3855.47)
[Wed Oct 19 06:39:47 2011] chipx,y range = (699.00-874.00, 600.00-776.00)
[Wed Oct 19 06:39:47 2011] Size of ../../acisf11731/products/events/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2596 counts
[Wed Oct 19 06:39:47 2011] ../../acisf11731/products/images/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_src.img and ../../acisf11731/products/images/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 19 06:39:47 2011] rmf not found, will run specextract
[Wed Oct 19 06:39:47 2011] arf not found, will run specextract
[Wed Oct 19 06:40:12 2011] ../../acisf11731/products/spectra/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1.warf not found
[Wed Oct 19 06:40:12 2011] ../../acisf11731/products/spectra/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1.wrmf not found
[Wed Oct 19 06:40:12 2011] Removal of ../../acisf11731/products/spectra/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1.soff failed
[Wed Oct 19 06:40:18 2011] ../../acisf11731/products/lightcurves/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_src.lc and ../../acisf11731/products/lightcurves/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 19 06:41:09 2011] Keeping rmf generated by specextract
[Wed Oct 19 06:41:09 2011] 147.075
[Wed Oct 19 06:49:12 2011] Updating aperture counts using extracted products
[Wed Oct 19 06:49:12 2011] Error reading totcts from fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 19 06:49:12 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 06:49:12 2011] Using photon index=1.80, rate=0.00796, arf fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 06:49:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 06:49:12 2011] Updating source flux to 1.2e-13
[Wed Oct 19 06:49:18 2011] Reading fit data from acisf11731/analysis//spectral/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 19 06:49:18 2011] Spectral fit parameter nH value = 9.09007e+13
[Wed Oct 19 06:49:18 2011] Spectral fit parameter PhoIndex value = 1.99259
[Wed Oct 19 06:49:18 2011] Failed to get F(0.3-8.0) from acisf11731/analysis//spectral/fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 19 06:49:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 06:49:18 2011] Using Nh = 9.1e+13, photon index=1.99, rate=0.00796, arf fullrun_ccd3_acisf11731_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 06:49:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 06:49:18 2011] Updating source flux to 1.2e-13