[Sat Oct  1 17:50:19 2011] Detection parameters:
  Position = (1009.6, 332.4) = 4 36 49.60 0 39 59.8
  Extent = 2.5" x 1.6", rotation angle = 58 degrees
  Source counts = 897.4 +/- 30.8
  Background counts = 49.6
  Rate = 0.03 +/- 0.001

[Sat Oct  1 17:50:21 2011] Off-axis axis estimate = 8.34'
[Sat Oct  1 17:51:17 2011] Using EEF radius (= 3.08 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 17:51:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 17:51:17 2011] Initial guess for spatial extent in simple fitting = 3.08"
[Sat Oct  1 17:51:17 2011] source mask rpix=6.3, npix_max = 182, mask sum = 169, frac = 0.926
[Sat Oct  1 17:51:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.08"
[Sat Oct  1 17:51:17 2011] fullrun_ccd3_acisf11729_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 17:51:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11729_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 17:51:17 2011] fullrun_ccd3_acisf11729_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 17:51:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11729_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 17:51:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11729_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11729_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 17:51:17 2011] fullrun_ccd3_acisf11729_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 17:51:18 2011] fullrun_ccd3_acisf11729_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 17:51:18 2011] Fit fullrun_ccd3_acisf11729_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 17:51:30 2011] Spatial fit model total counts = 955.377000, observed total counts = 956.000000
[Sat Oct  1 17:51:30 2011] Offset between fit and detection position for source 1 = 1.078577 pixels
[Sat Oct  1 17:51:30 2011] 955.026000 total counts/ 116.268000 bgd. counts: snr = 77.786920
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.078577 pixels
  Position = (1010.3, 333.2) = 4 36 49.59 0 39 60.0
  Extent = 2.1 (2.0-2.2)", rotation angle = 0
  Source counts = 838.8 +/- 30.9
  Background counts = 116.3
  Rate = 0.03 +/- 0.001
[Sat Oct  1 17:51:30 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 17:51:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 17:51:30 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 17:51:30 2011] Source does appear to be extended
[Sat Oct  1 17:51:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 17:51:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 17:51:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 17:51:49 2011] Initial guess for spatial extent in simple fitting = 2.10"
[Sat Oct  1 17:51:49 2011] source mask rpix=4.3, npix_max = 90, mask sum = 90, frac = 0.990
[Sat Oct  1 17:51:49 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.10"
[Sat Oct  1 17:51:49 2011] fullrun_ccd3_acisf11729_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 17:51:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11729_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 17:51:49 2011] fullrun_ccd3_acisf11729_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 17:51:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11729_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 17:51:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11729_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11729_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 17:51:49 2011] fullrun_ccd3_acisf11729_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 17:51:49 2011] fullrun_ccd3_acisf11729_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 17:51:49 2011] Fit fullrun_ccd3_acisf11729_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 17:51:58 2011] Spatial fit model total counts = 922.331000, observed total counts = 924.000000
[Sat Oct  1 17:51:58 2011] Offset between fit and detection position for source 1 = 0.128289 pixels
[Sat Oct  1 17:51:58 2011] 921.410000 total counts/ 168.924000 bgd. counts: snr = 57.896558
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.128289 pixels
  Position = (1010.3, 333.3) = 4 36 49.59 0 40 0.0
  Extent = 1.8 (1.7-2.0)", rotation angle = 0
  Source counts = 752.5 +/- 30.4
  Background counts = 168.9
  Rate = 0.02 +/- 0.001
[Sat Oct  1 17:51:58 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 17:51:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 17:51:58 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 17:51:58 2011] Source does appear to be extended
[Sat Oct  1 17:51:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 17:54:40 2011] Not overwriting source region fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_src.reg
[Sat Oct  1 17:54:40 2011] Extracting stamp from image fullrun_ccd3_acisf11729_pi14-548_cl_sm2.00.img.gz, (926, 249) - (1094, 417)
[Sat Oct  1 17:54:40 2011] Writing fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1.gif
[Sat Oct  1 17:54:41 2011] ../../acisf11729/products/events/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_src.evt and ../../acisf11729/products/events/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct  1 17:54:41 2011] Size of ../../acisf11729/products/events/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_src.evt.gz[events] = 881 counts
[Sat Oct  1 17:54:41 2011] Mean chipx,y = (199.39, 138.31)
[Sat Oct  1 17:54:41 2011] Mean tdetx,y = (4993.69, 3260.39)
[Sat Oct  1 17:54:41 2011] chipx,y range = (171.00-224.00, 110.00-169.00)
[Sat Oct  1 17:54:41 2011] Size of ../../acisf11729/products/events/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 104 counts
[Sat Oct  1 17:54:41 2011] ../../acisf11729/products/images/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_src.img and ../../acisf11729/products/images/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct  1 17:54:41 2011] ../../acisf11729/products/spectra/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_src.pi and ../../acisf11729/products/spectra/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct  1 17:54:45 2011] ../../acisf11729/products/lightcurves/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_src.lc and ../../acisf11729/products/lightcurves/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct  1 17:55:15 2011] Keeping rmf generated by specextract
[Sat Oct  1 17:55:15 2011] 167.212
[Sat Oct  1 17:55:22 2011] Updating aperture counts using extracted products
[Sat Oct  1 17:55:22 2011] Error reading totcts from fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct  1 17:55:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 17:55:23 2011] Using photon index=1.80, rate=0.0247, arf fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 17:55:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 17:55:23 2011] Updating source flux to 3.5e-13
[Sat Oct  1 17:55:35 2011] Reading fit data from acisf11729/analysis//spectral/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct  1 17:55:35 2011] Spectral fit parameter nH value = 2.01756e+21
[Sat Oct  1 17:55:35 2011] Spectral fit parameter PhoIndex value = 1.99012
[Sat Oct  1 17:55:35 2011] Failed to get F(0.3-8.0) from acisf11729/analysis//spectral/fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 17:55:35 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 17:55:35 2011] Using Nh = 2e+21, photon index=1.99, rate=0.0247, arf fullrun_ccd3_acisf11729_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 17:55:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 17:55:35 2011] Updating source flux to 3.2e-13