[Sat Oct  1 17:50:15 2011] Detection parameters:
  Position = (790.4, 384.8) = 4 37 38.22 0 46 44.4
  Extent = 1.6" x 1.0", rotation angle = 166 degrees
  Source counts = 24.0 +/- 5.3
  Background counts = 4.0
  Rate = 0.0008 +/- 0.0002

[Sat Oct  1 17:50:17 2011] Off-axis axis estimate = 6.51'
[Sat Oct  1 17:51:15 2011] Using EEF radius (= 1.90 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 17:51:15 2011] Initial guess for spatial extent in simple fitting = 1.90"
[Sat Oct  1 17:51:15 2011] source mask rpix=3.9, npix_max = 75, mask sum = 81, frac = 1.069
[Sat Oct  1 17:51:15 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.90"
[Sat Oct  1 17:51:15 2011] fullrun_ccd0_acisf11729_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct  1 17:51:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11729_pi14-548_cl_pass0_src3.csv
[Sat Oct  1 17:51:15 2011] fullrun_ccd0_acisf11729_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct  1 17:51:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11729_pi14-548_cl_pass0_src3.csv
[Sat Oct  1 17:51:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11729_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11729_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 17:51:15 2011] fullrun_ccd0_acisf11729_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct  1 17:51:15 2011] fullrun_ccd0_acisf11729_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct  1 17:51:15 2011] Fit fullrun_ccd0_acisf11729_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct  1 17:51:24 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 20.759418 pixels away
[Sat Oct  1 17:51:24 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 17:51:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 17:51:24 2011] Assessing source extent using major
[Sat Oct  1 17:51:24 2011] Source does appear to be extended
[Sat Oct  1 17:51:24 2011] Computing asymmetry using major and minor axis, asym = 1.55
[Sat Oct  1 17:51:24 2011] Source is asymmetric
[Sat Oct  1 17:51:46 2011] Using EEF radius (= 1.90 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 17:51:46 2011] Initial guess for spatial extent in simple fitting = 1.90"
[Sat Oct  1 17:51:46 2011] source mask rpix=3.9, npix_max = 75, mask sum = 81, frac = 1.069
[Sat Oct  1 17:51:46 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.90"
[Sat Oct  1 17:51:47 2011] fullrun_ccd0_acisf11729_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct  1 17:51:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11729_pi14-548_cl_pass1_src3.csv
[Sat Oct  1 17:51:47 2011] fullrun_ccd0_acisf11729_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct  1 17:51:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11729_pi14-548_cl_pass1_src3.csv
[Sat Oct  1 17:51:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11729_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11729_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 17:51:47 2011] fullrun_ccd0_acisf11729_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct  1 17:51:47 2011] fullrun_ccd0_acisf11729_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct  1 17:51:47 2011] Fit fullrun_ccd0_acisf11729_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct  1 17:51:55 2011] Spatial fit model total counts = 29.564000, observed total counts = 31.000000
[Sat Oct  1 17:51:55 2011] Offset between fit and detection position for source 3 = 0.606829 pixels
[Sat Oct  1 17:51:55 2011] 30.766940 total counts/ 9.237240 bgd. counts: snr = 7.083809
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.606829 pixels
  Position = (789.8, 384.8) = 4 37 38.26 0 46 44.2
  Extent = 1.4 (1.0-2.0)", rotation angle = 0
  Source counts = 21.5 +/- 5.5
  Background counts = 9.2
  Rate = 0.0007 +/- 0.0002
[Sat Oct  1 17:51:55 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 17:51:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 17:51:55 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 17:51:55 2011] Source does appear to be extended
[Sat Oct  1 17:51:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 17:52:16 2011] Not overwriting source region fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_src.reg
[Sat Oct  1 17:52:16 2011] Extracting stamp from image fullrun_ccd0_acisf11729_pi14-548_cl_sm2.00.img.gz, (724, 319) - (856, 451)
[Sat Oct  1 17:52:16 2011] Writing fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3.gif
[Sat Oct  1 17:52:23 2011] ../../acisf11729/products/events/fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_src.evt and ../../acisf11729/products/events/fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct  1 17:52:24 2011] Size of ../../acisf11729/products/events/fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_src.evt.gz[events] = 28 counts
[Sat Oct  1 17:52:24 2011] Mean chipx,y = (620.96, 785.50)
[Sat Oct  1 17:52:24 2011] Mean tdetx,y = (3846.50, 4511.04)
[Sat Oct  1 17:52:24 2011] chipx,y range = (600.00-637.00, 767.00-805.00)
[Sat Oct  1 17:52:24 2011] Size of ../../acisf11729/products/events/fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 52 counts
[Sat Oct  1 17:52:24 2011] ../../acisf11729/products/images/fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_src.img and ../../acisf11729/products/images/fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct  1 17:52:24 2011] ../../acisf11729/products/spectra/fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_src.pi and ../../acisf11729/products/spectra/fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct  1 17:52:24 2011] Not generating rmf since there are only 21 counts
[Sat Oct  1 17:52:27 2011] ../../acisf11729/products/lightcurves/fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_src.lc and ../../acisf11729/products/lightcurves/fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct  1 17:53:00 2011] 170.991
[Sat Oct  1 17:55:21 2011] Updating aperture counts using extracted products
[Sat Oct  1 17:55:22 2011] Error reading totcts from fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct  1 17:55:22 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 17:55:22 2011] Using photon index=1.80, rate=0.000705, arf fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3.arf
[Sat Oct  1 17:55:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 17:55:22 2011] Updating source flux to 9.2e-15
[Sat Oct  1 17:55:25 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct  1 17:55:26 2011] acisf11729/analysis//spectral/fullrun_ccd0_acisf11729_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete