[Fri Oct  7 16:07:59 2011] Detection parameters:
  Position = (767.2, 882.7) = 23 37 35.55 0 15 56.5
  Extent = 0.5" x 0.5", rotation angle = 116 degrees
  Source counts = 115.7 +/- 11.0
  Background counts = 5.3
  Rate = 0.007 +/- 0.0007

[Fri Oct  7 16:08:01 2011] Off-axis axis estimate = 2.68'
[Fri Oct  7 16:08:46 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 16:08:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 16:08:46 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Fri Oct  7 16:08:46 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.924
[Fri Oct  7 16:08:46 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.52"
[Fri Oct  7 16:08:46 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 16:08:46 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 16:08:46 2011] Fit fullrun_ccd3_acisf11728_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Oct  7 16:08:47 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 16:08:47 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 16:08:47 2011] Fit fullrun_ccd3_acisf11728_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 16:08:56 2011] Spatial fit model total counts = 153.240000, observed total counts = 154.000000
[Fri Oct  7 16:08:56 2011] Offset between fit and detection position for source 2 = 0.597485 pixels
[Fri Oct  7 16:08:56 2011] 154.767900 total counts/ 24.815900 bgd. counts: snr = 26.086628
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.597485 pixels
  Position = (767.4, 883.3) = 23 37 35.56 0 15 56.5
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 130.0 +/- 12.4
  Background counts = 24.8
  Rate = 0.008 +/- 0.0007
[Fri Oct  7 16:08:56 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 16:08:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 16:08:56 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 16:08:56 2011] Source does appear to be extended
[Fri Oct  7 16:08:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 16:09:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 16:09:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 16:09:13 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Oct  7 16:09:13 2011] source mask rpix=1.1, npix_max = 10, mask sum = 8, frac = 0.763
[Fri Oct  7 16:09:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.55"
[Fri Oct  7 16:09:13 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 16:09:13 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 16:09:13 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 16:09:13 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 16:09:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 16:09:14 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 16:09:14 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 16:09:14 2011] Fit fullrun_ccd3_acisf11728_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 16:09:21 2011] Spatial fit model total counts = 154.424000, observed total counts = 155.000000
[Fri Oct  7 16:09:21 2011] Offset between fit and detection position for source 2 = 0.002079 pixels
[Fri Oct  7 16:09:21 2011] 156.009700 total counts/ 25.540700 bgd. counts: snr = 25.816118
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002079 pixels
  Position = (767.4, 883.3) = 23 37 35.56 0 15 56.5
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 130.5 +/- 12.5
  Background counts = 25.5
  Rate = 0.008 +/- 0.0007
[Fri Oct  7 16:09:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 16:09:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 16:09:21 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 16:09:21 2011] Source does appear to be extended
[Fri Oct  7 16:09:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 16:11:44 2011] Not overwriting source region fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_src.reg
[Fri Oct  7 16:11:44 2011] Extracting stamp from image fullrun_ccd3_acisf11728_pi14-548_cl_sm2.00.img.gz, (742, 858) - (793, 909)
[Fri Oct  7 16:11:44 2011] Writing fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2.gif
[Fri Oct  7 16:11:46 2011] ../../acisf11728/products/events/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_src.evt and ../../acisf11728/products/events/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct  7 16:11:46 2011] Size of ../../acisf11728/products/events/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_src.evt.gz[events] = 141 counts
[Fri Oct  7 16:11:46 2011] Mean chipx,y = (530.95, 746.11)
[Fri Oct  7 16:11:46 2011] Mean tdetx,y = (4385.90, 3591.95)
[Fri Oct  7 16:11:46 2011] chipx,y range = (514.00-547.00, 728.00-766.00)
[Fri Oct  7 16:11:46 2011] Size of ../../acisf11728/products/events/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 59 counts
[Fri Oct  7 16:11:46 2011] ../../acisf11728/products/images/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_src.img and ../../acisf11728/products/images/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct  7 16:11:46 2011] ../../acisf11728/products/spectra/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_src.pi and ../../acisf11728/products/spectra/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct  7 16:11:49 2011] ../../acisf11728/products/lightcurves/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_src.lc and ../../acisf11728/products/lightcurves/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct  7 16:14:13 2011] Keeping rmf generated by specextract
[Fri Oct  7 16:14:13 2011] 194.292
[Fri Oct  7 16:14:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 16:14:23 2011] Error reading totcts from fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct  7 16:14:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 16:14:23 2011] Using photon index=1.80, rate=0.00776, arf fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2.arf
[Fri Oct  7 16:14:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 16:14:23 2011] Updating source flux to 9.2e-14
[Fri Oct  7 16:14:41 2011] Reading fit data from acisf11728/analysis//spectral/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_pl.csv
[Fri Oct  7 16:14:41 2011] Spectral fit parameter nH value = 2.53945e+21
[Fri Oct  7 16:14:41 2011] Spectral fit parameter PhoIndex value = 1.63559
[Fri Oct  7 16:14:41 2011] Failed to get F(0.3-8.0) from acisf11728/analysis//spectral/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 16:14:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 16:14:41 2011] Using Nh = 2.5e+21, photon index=1.64, rate=0.00776, arf fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src2.arf
[Fri Oct  7 16:14:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 16:14:41 2011] Updating source flux to 9.9e-14