[Fri Oct  7 16:08:00 2011] Detection parameters:
  Position = (374.4, 1156.9) = 23 37 48.44 0 18 11.4
  Extent = 0.5" x 0.5", rotation angle = 153 degrees
  Source counts = 14.4 +/- 3.9
  Background counts = 0.6
  Rate = 0.0009 +/- 0.0002

[Fri Oct  7 16:08:01 2011] Off-axis axis estimate = 3.05'
[Fri Oct  7 16:08:46 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 16:08:46 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Oct  7 16:08:46 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.037
[Fri Oct  7 16:08:46 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.59"
[Fri Oct  7 16:08:47 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct  7 16:08:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11728_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 16:08:47 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct  7 16:08:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11728_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 16:08:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11728_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11728_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 16:08:47 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct  7 16:08:47 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct  7 16:08:47 2011] Fit fullrun_ccd3_acisf11728_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct  7 16:08:56 2011] Spatial fit model total counts = 18.984500, observed total counts = 19.000000
[Fri Oct  7 16:08:56 2011] Offset between fit and detection position for source 12 = 0.705606 pixels
[Fri Oct  7 16:08:56 2011] 19.350640 total counts/ 4.805540 bgd. counts: snr = 6.635072
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.705606 pixels
  Position = (374.9, 1157.4) = 23 37 48.44 0 18 11.4
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 14.5 +/- 4.4
  Background counts = 4.8
  Rate = 0.0009 +/- 0.0003
[Fri Oct  7 16:08:56 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 16:08:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 16:08:56 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 16:08:56 2011] Source does appear to be extended
[Fri Oct  7 16:08:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 16:09:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 16:09:13 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Oct  7 16:09:13 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.087
[Fri Oct  7 16:09:13 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.46"
[Fri Oct  7 16:09:14 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct  7 16:09:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 16:09:14 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct  7 16:09:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 16:09:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11728_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 16:09:14 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct  7 16:09:14 2011] fullrun_ccd3_acisf11728_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct  7 16:09:14 2011] Fit fullrun_ccd3_acisf11728_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct  7 16:09:21 2011] Spatial fit model total counts = 18.999500, observed total counts = 19.000000
[Fri Oct  7 16:09:21 2011] Offset between fit and detection position for source 12 = 0.008147 pixels
[Fri Oct  7 16:09:21 2011] 18.865920 total counts/ 4.313920 bgd. counts: snr = 7.006266
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.008147 pixels
  Position = (374.9, 1157.4) = 23 37 48.44 0 18 11.4
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 14.6 +/- 4.3
  Background counts = 4.3
  Rate = 0.0009 +/- 0.0003
[Fri Oct  7 16:09:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 16:09:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 16:09:21 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 16:09:21 2011] Source does appear to be extended
[Fri Oct  7 16:09:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 16:11:44 2011] Not overwriting source region fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_src.reg
[Fri Oct  7 16:11:44 2011] Extracting stamp from image fullrun_ccd3_acisf11728_pi14-548_cl_sm2.00.img.gz, (354, 1137) - (396, 1178)
[Fri Oct  7 16:11:44 2011] Writing fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12.gif
[Fri Oct  7 16:12:15 2011] ../../acisf11728/products/events/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_src.evt and ../../acisf11728/products/events/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri Oct  7 16:12:15 2011] Size of ../../acisf11728/products/events/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_src.evt.gz[events] = 15 counts
[Fri Oct  7 16:12:15 2011] Mean chipx,y = (1005.67, 813.93)
[Fri Oct  7 16:12:15 2011] Mean tdetx,y = (4318.07, 4066.67)
[Fri Oct  7 16:12:15 2011] chipx,y range = (991.00-1023.00, 795.00-829.00)
[Fri Oct  7 16:12:15 2011] Size of ../../acisf11728/products/events/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 3 counts
[Fri Oct  7 16:12:15 2011] ../../acisf11728/products/images/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_src.img and ../../acisf11728/products/images/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri Oct  7 16:12:15 2011] ../../acisf11728/products/spectra/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_src.pi and ../../acisf11728/products/spectra/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Fri Oct  7 16:12:15 2011] Not generating rmf since there are only 14 counts
[Fri Oct  7 16:12:19 2011] ../../acisf11728/products/lightcurves/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_src.lc and ../../acisf11728/products/lightcurves/fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri Oct  7 16:14:13 2011] 197.853
[Fri Oct  7 16:14:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 16:14:23 2011] Error reading totcts from fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12_src.pi.gz
[Fri Oct  7 16:14:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 16:14:23 2011] Using photon index=1.80, rate=0.000865, arf fullrun_ccd3_acisf11728_pi14-548_pass1_cl_src12.arf
[Fri Oct  7 16:14:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 16:14:23 2011] Updating source flux to 9.9e-15
[Fri Oct  7 16:14:37 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting