[Fri Oct  7 16:07:58 2011] Detection parameters:
  Position = (713.0, 790.0) = 23 37 22.01 0 22 39.6
  Extent = 1.1" x 0.7", rotation angle = 52 degrees
  Source counts = 28.9 +/- 5.5
  Background counts = 1.1
  Rate = 0.002 +/- 0.0003

[Fri Oct  7 16:07:59 2011] Off-axis axis estimate = 5.40'
[Fri Oct  7 16:08:45 2011] Using EEF radius (= 1.35 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 16:08:45 2011] Initial guess for spatial extent in simple fitting = 1.35"
[Fri Oct  7 16:08:45 2011] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.856
[Fri Oct  7 16:08:45 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.35"
[Fri Oct  7 16:08:46 2011] fullrun_ccd2_acisf11728_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct  7 16:08:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11728_pi14-548_cl_pass0_src3.csv
[Fri Oct  7 16:08:46 2011] fullrun_ccd2_acisf11728_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct  7 16:08:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11728_pi14-548_cl_pass0_src3.csv
[Fri Oct  7 16:08:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11728_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11728_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 16:08:46 2011] fullrun_ccd2_acisf11728_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct  7 16:08:46 2011] fullrun_ccd2_acisf11728_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct  7 16:08:46 2011] Fit fullrun_ccd2_acisf11728_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct  7 16:08:54 2011] Spatial fit model total counts = 31.735600, observed total counts = 32.000000
[Fri Oct  7 16:08:54 2011] Offset between fit and detection position for source 2 = 0.400230 pixels
[Fri Oct  7 16:08:54 2011] 32.630050 total counts/ 7.836750 bgd. counts: snr = 8.856586
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.400230 pixels
  Position = (713.0, 789.6) = 23 37 22.03 0 22 39.2
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 24.8 +/- 5.7
  Background counts = 7.8
  Rate = 0.001 +/- 0.0003
[Fri Oct  7 16:08:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 16:08:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 16:08:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 16:08:54 2011] Source does appear to be extended
[Fri Oct  7 16:08:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 16:09:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 16:09:12 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Fri Oct  7 16:09:12 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.878
[Fri Oct  7 16:09:12 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.93"
[Fri Oct  7 16:09:13 2011] fullrun_ccd2_acisf11728_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct  7 16:09:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11728_pi14-548_cl_pass1_src3.csv
[Fri Oct  7 16:09:13 2011] fullrun_ccd2_acisf11728_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct  7 16:09:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11728_pi14-548_cl_pass1_src3.csv
[Fri Oct  7 16:09:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11728_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11728_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 16:09:13 2011] fullrun_ccd2_acisf11728_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct  7 16:09:13 2011] fullrun_ccd2_acisf11728_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct  7 16:09:13 2011] Fit fullrun_ccd2_acisf11728_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct  7 16:09:19 2011] Spatial fit model total counts = 29.744700, observed total counts = 31.000000
[Fri Oct  7 16:09:19 2011] Offset between fit and detection position for source 2 = 0.101139 pixels
[Fri Oct  7 16:09:19 2011] 30.952220 total counts/ 7.901120 bgd. counts: snr = 8.200632
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.101139 pixels
  Position = (713.0, 789.5) = 23 37 22.03 0 22 39.1
  Extent = 0.9 (0.5-1.4)", rotation angle = 0
  Source counts = 23.1 +/- 5.6
  Background counts = 7.9
  Rate = 0.001 +/- 0.0003
[Fri Oct  7 16:09:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 16:09:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 16:09:19 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 16:09:19 2011] Source does appear to be extended
[Fri Oct  7 16:09:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 16:10:18 2011] Not overwriting source region fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_src.reg
[Fri Oct  7 16:10:18 2011] Extracting stamp from image fullrun_ccd2_acisf11728_pi14-548_cl_sm2.00.img.gz, (672, 749) - (754, 830)
[Fri Oct  7 16:10:18 2011] Writing fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2.gif
[Fri Oct  7 16:10:25 2011] ../../acisf11728/products/events/fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_src.evt and ../../acisf11728/products/events/fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct  7 16:10:25 2011] Size of ../../acisf11728/products/events/fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_src.evt.gz[events] = 30 counts
[Fri Oct  7 16:10:25 2011] Mean chipx,y = (487.77, 402.37)
[Fri Oct  7 16:10:25 2011] Mean tdetx,y = (3463.37, 3598.23)
[Fri Oct  7 16:10:25 2011] chipx,y range = (470.00-505.00, 383.00-422.00)
[Fri Oct  7 16:10:25 2011] Size of ../../acisf11728/products/events/fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 9 counts
[Fri Oct  7 16:10:25 2011] ../../acisf11728/products/images/fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_src.img and ../../acisf11728/products/images/fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct  7 16:10:25 2011] ../../acisf11728/products/spectra/fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_src.pi and ../../acisf11728/products/spectra/fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct  7 16:10:25 2011] Not generating rmf since there are only 23 counts
[Fri Oct  7 16:10:28 2011] ../../acisf11728/products/lightcurves/fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_src.lc and ../../acisf11728/products/lightcurves/fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct  7 16:11:44 2011] 185.967
[Fri Oct  7 16:14:22 2011] Updating aperture counts using extracted products
[Fri Oct  7 16:14:22 2011] Error reading totcts from fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct  7 16:14:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 16:14:23 2011] Using photon index=1.80, rate=0.00137, arf fullrun_ccd2_acisf11728_pi14-548_pass1_cl_src2.arf
[Fri Oct  7 16:14:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 16:14:23 2011] Updating source flux to 1.7e-14
[Fri Oct  7 16:14:30 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting