[Sun Feb 12 09:11:45 2012] Detection parameters:
  Position = (522.8, 426.0) = 12 34 33.20 9 50 15.2
  Extent = 0.6" x 0.5", rotation angle = 175 degrees
  Source counts = 38.2 +/- 6.2
  Background counts = 0.8
  Rate = 0.002 +/- 0.0003

[Sun Feb 12 09:11:46 2012] Off-axis axis estimate = 3.36'
[Sun Feb 12 09:44:14 2012] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 09:44:14 2012] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Feb 12 09:44:14 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.183
[Sun Feb 12 09:44:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.66"
[Sun Feb 12 09:58:10 2012] fullrun_ccd2_acisf11727_pi14-548_cl_pass0_src3.ximg exists
[Sun Feb 12 09:58:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11727_pi14-548_cl_pass0_src3.csv
[Sun Feb 12 09:58:10 2012] fullrun_ccd2_acisf11727_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Feb 12 09:58:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11727_pi14-548_cl_pass0_src3.csv
[Sun Feb 12 09:58:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11727_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11727_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 09:58:10 2012] fullrun_ccd2_acisf11727_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb 12 09:58:10 2012] fullrun_ccd2_acisf11727_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb 12 09:58:10 2012] Fit fullrun_ccd2_acisf11727_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Feb 12 10:08:06 2012] Spatial fit model total counts = 40.599300, observed total counts = 41.000000
[Sun Feb 12 10:08:06 2012] Offset between fit and detection position for source 5 = 0.667906 pixels
[Sun Feb 12 10:08:06 2012] 41.189910 total counts/ 4.724610 bgd. counts: snr = 16.776324
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.667906 pixels
  Position = (523.2, 426.6) = 12 34 33.21 9 50 15.2
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 36.5 +/- 6.4
  Background counts = 4.7
  Rate = 0.002 +/- 0.0003
[Sun Feb 12 10:08:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 10:08:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 10:08:06 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 10:08:06 2012] Source does appear to be extended
[Sun Feb 12 10:08:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 10:31:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:31:19 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Sun Feb 12 10:31:19 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.934
[Sun Feb 12 10:31:19 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.64"
[Sun Feb 12 10:42:04 2012] fullrun_ccd2_acisf11727_pi14-548_cl_pass1_src3.ximg exists
[Sun Feb 12 10:42:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11727_pi14-548_cl_pass1_src3.csv
[Sun Feb 12 10:42:04 2012] fullrun_ccd2_acisf11727_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Feb 12 10:42:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11727_pi14-548_cl_pass1_src3.csv
[Sun Feb 12 10:42:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11727_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11727_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 10:42:04 2012] fullrun_ccd2_acisf11727_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Feb 12 10:42:04 2012] fullrun_ccd2_acisf11727_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Feb 12 10:42:04 2012] Fit fullrun_ccd2_acisf11727_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Feb 12 10:51:41 2012] Spatial fit model total counts = 41.762300, observed total counts = 42.000000
[Sun Feb 12 10:51:41 2012] Offset between fit and detection position for source 5 = 0.002938 pixels
[Sun Feb 12 10:51:41 2012] 42.452480 total counts/ 5.991080 bgd. counts: snr = 14.896381
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.002938 pixels
  Position = (523.2, 426.6) = 12 34 33.21 9 50 15.2
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 36.5 +/- 6.5
  Background counts = 6.0
  Rate = 0.002 +/- 0.0003
[Sun Feb 12 10:51:41 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 10:51:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 10:51:41 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 10:51:41 2012] Source does appear to be extended
[Sun Feb 12 10:51:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 10:58:15 2012] Writing source region out to fullrun_ccd2_acisf11727_pi14-548_pass1_cl_src5_src.reg
[Sun Feb 12 10:58:15 2012] Extracting stamp from image fullrun_ccd2_acisf11727_pi14-548_cl_sm2.00.img.gz, (494, 398) - (552, 456)
[Sun Feb 12 10:58:15 2012] Writing fullrun_ccd2_acisf11727_pi14-548_pass1_cl_src5.gif
[Sun Feb 12 10:59:25 2012] Size of ../../acisf11727/products/events/fullrun_ccd2_acisf11727_pi14-548_pass1_cl_src5_src.evt.gz[events] = 38 counts
[Sun Feb 12 10:59:25 2012] Mean chipx,y = (205.87, 653.03)
[Sun Feb 12 10:59:25 2012] Mean tdetx,y = (3714.03, 3880.13)
[Sun Feb 12 10:59:25 2012] chipx,y range = (188.00-226.00, 636.00-670.00)
[Sun Feb 12 10:59:25 2012] Size of ../../acisf11727/products/events/fullrun_ccd2_acisf11727_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 15 counts
[Sun Feb 12 10:59:26 2012] Not generating rmf since there are only 36 counts
[Sun Feb 12 10:59:26 2012] arf not found, will run specextract
[Sun Feb 12 10:59:59 2012] ../../acisf11727/products/spectra/fullrun_ccd2_acisf11727_pi14-548_pass1_cl_src5.warf not found
[Sun Feb 12 10:59:59 2012] ../../acisf11727/products/spectra/fullrun_ccd2_acisf11727_pi14-548_pass1_cl_src5.wrmf not found
[Sun Feb 12 10:59:59 2012] Removal of ../../acisf11727/products/spectra/fullrun_ccd2_acisf11727_pi14-548_pass1_cl_src5.soff failed
[Sun Feb 12 11:05:10 2012] Spectrum 5 has only 36 counts, deleting rmf
[Sun Feb 12 11:05:10 2012] 182.108
[Sun Feb 12 11:12:07 2012] Updating aperture counts using extracted products
[Sun Feb 12 11:12:07 2012] Error reading totcts from fullrun_ccd2_acisf11727_pi14-548_pass1_cl_src5_src.pi.gz
[Sun Feb 12 11:12:07 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 11:12:07 2012] Using photon index=1.80, rate=0.00175, arf fullrun_ccd2_acisf11727_pi14-548_pass1_cl_src5.arf
[Sun Feb 12 11:12:07 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 11:12:07 2012] Updating source flux to 2.2e-14
[Sun Feb 12 11:12:11 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 11:12:12 2012] acisf11727/analysis//spectral/fullrun_ccd2_acisf11727_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete