[Fri Oct 21 13:05:10 2011] Detection parameters:
  Position = (455.3, 317.9) = 15 39 38.08 34 24 38.0
  Extent = 0.9" x 0.6", rotation angle = 84 degrees
  Source counts = 13.6 +/- 4.2
  Background counts = 4.4
  Rate = 0.0007 +/- 0.0002

[Fri Oct 21 13:05:11 2011] Off-axis axis estimate = 2.88'
[Fri Oct 21 13:05:58 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 13:05:58 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Oct 21 13:05:58 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.126
[Fri Oct 21 13:05:58 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.56"
[Fri Oct 21 13:05:59 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src9.ximg exists
[Fri Oct 21 13:05:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src9.csv
[Fri Oct 21 13:05:59 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Oct 21 13:05:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src9.csv
[Fri Oct 21 13:05:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 13:05:59 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Oct 21 13:05:59 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Oct 21 13:05:59 2011] Fit fullrun_ccd3_acisf11726_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Oct 21 13:06:08 2011] Spatial fit model total counts = 21.045400, observed total counts = 23.000000
[Fri Oct 21 13:06:08 2011] Offset between fit and detection position for source 8 = 0.513658 pixels
[Fri Oct 21 13:06:08 2011] 21.621310 total counts/ 3.099610 bgd. counts: snr = 10.520280
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.513658 pixels
  Position = (455.8, 318.0) = 15 39 38.08 34 24 37.8
  Extent = 1.1 (0.4-1.5)", rotation angle = 0
  Source counts = 18.5 +/- 4.6
  Background counts = 3.1
  Rate = 0.0009 +/- 0.0002
[Fri Oct 21 13:06:08 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 13:06:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 13:06:08 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 13:06:08 2011] Source does appear to be extended
[Fri Oct 21 13:06:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 13:06:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 13:06:25 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Fri Oct 21 13:06:25 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.056
[Fri Oct 21 13:06:25 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 1.07"
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src9.ximg exists
[Fri Oct 21 13:06:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src9.csv
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src9_1.ximg exists
[Fri Oct 21 13:06:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src9.csv
[Fri Oct 21 13:06:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Oct 21 13:06:26 2011] Fit fullrun_ccd3_acisf11726_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Oct 21 13:06:33 2011] Spatial fit model total counts = 22.004000, observed total counts = 22.000000
[Fri Oct 21 13:06:33 2011] Offset between fit and detection position for source 8 = 0.194815 pixels
[Fri Oct 21 13:06:33 2011] 22.277730 total counts/ 4.380330 bgd. counts: snr = 8.551386
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.194815 pixels
  Position = (455.9, 318.2) = 15 39 38.08 34 24 37.9
  Extent = 1.0 (0.4-1.6)", rotation angle = 0
  Source counts = 17.9 +/- 4.7
  Background counts = 4.4
  Rate = 0.0009 +/- 0.0002
[Fri Oct 21 13:06:33 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 13:06:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 13:06:33 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 13:06:33 2011] Source does appear to be extended
[Fri Oct 21 13:06:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 13:08:26 2011] Not overwriting source region fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_src.reg
[Fri Oct 21 13:08:26 2011] Extracting stamp from image fullrun_ccd3_acisf11726_pi14-548_cl_sm2.00.img.gz, (412, 274) - (500, 362)
[Fri Oct 21 13:08:26 2011] Writing fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8.gif
[Fri Oct 21 13:08:53 2011] ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_src.evt and ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Fri Oct 21 13:08:53 2011] Size of ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_src.evt.gz[events] = 20 counts
[Fri Oct 21 13:08:53 2011] Mean chipx,y = (764.05, 675.60)
[Fri Oct 21 13:08:53 2011] Mean tdetx,y = (4456.40, 3825.05)
[Fri Oct 21 13:08:53 2011] chipx,y range = (743.00-785.00, 660.00-697.00)
[Fri Oct 21 13:08:53 2011] Size of ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 105 counts
[Fri Oct 21 13:08:53 2011] ../../acisf11726/products/images/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_src.img and ../../acisf11726/products/images/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Fri Oct 21 13:08:53 2011] ../../acisf11726/products/spectra/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_src.pi and ../../acisf11726/products/spectra/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Fri Oct 21 13:08:53 2011] Not generating rmf since there are only 17 counts
[Fri Oct 21 13:08:56 2011] ../../acisf11726/products/lightcurves/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_src.lc and ../../acisf11726/products/lightcurves/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Fri Oct 21 13:09:35 2011] 190.909
[Fri Oct 21 13:09:42 2011] Updating aperture counts using extracted products
[Fri Oct 21 13:09:42 2011] Error reading totcts from fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_src.pi.gz
[Fri Oct 21 13:09:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 13:09:42 2011] Using photon index=1.80, rate=0.000856, arf fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8.arf
[Fri Oct 21 13:09:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 13:09:42 2011] Updating source flux to 1.1e-14
[Fri Oct 21 13:09:51 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 21 13:09:52 2011] acisf11726/analysis//spectral/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete