[Fri Oct 21 13:05:10 2011] Detection parameters:
  Position = (569.8, 718.8) = 15 39 33.52 34 27 55.2
  Extent = 0.7" x 0.6", rotation angle = 129 degrees
  Source counts = 20.0 +/- 4.7
  Background counts = 2.0
  Rate = 0.001 +/- 0.0002

[Fri Oct 21 13:05:11 2011] Off-axis axis estimate = 4.98'
[Fri Oct 21 13:05:58 2011] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 13:05:58 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Fri Oct 21 13:05:58 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.083
[Fri Oct 21 13:05:58 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.17"
[Fri Oct 21 13:05:58 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 21 13:05:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 13:05:58 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 21 13:05:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 13:05:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 13:05:59 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 21 13:05:59 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 21 13:05:59 2011] Fit fullrun_ccd3_acisf11726_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 21 13:06:08 2011] Spatial fit model total counts = 23.548300, observed total counts = 25.000000
[Fri Oct 21 13:06:08 2011] Offset between fit and detection position for source 4 = 0.826106 pixels
[Fri Oct 21 13:06:08 2011] 22.595738 total counts/ 0.038738 bgd. counts: snr = 114.607570
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.826106 pixels
  Position = (570.3, 719.4) = 15 39 33.51 34 27 55.2
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 22.6 +/- 4.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Fri Oct 21 13:06:08 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 13:06:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 13:06:08 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 13:06:08 2011] Source does appear to be extended
[Fri Oct 21 13:06:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 13:06:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 13:06:25 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Fri Oct 21 13:06:25 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.117
[Fri Oct 21 13:06:25 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.92"
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 21 13:06:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 21 13:06:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 13:06:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 21 13:06:26 2011] Fit fullrun_ccd3_acisf11726_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 21 13:06:33 2011] Spatial fit model total counts = 23.279700, observed total counts = 25.000000
[Fri Oct 21 13:06:33 2011] Offset between fit and detection position for source 4 = 0.032062 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.032062 pixels
  Position = (570.3, 719.4) = 15 39 33.51 34 27 55.2
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 22.2 +/- 4.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Fri Oct 21 13:06:33 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 13:06:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 13:06:33 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 13:06:33 2011] Source does appear to be extended
[Fri Oct 21 13:06:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 13:08:26 2011] Not overwriting source region fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_src.reg
[Fri Oct 21 13:08:26 2011] Extracting stamp from image fullrun_ccd3_acisf11726_pi14-548_cl_sm2.00.img.gz, (530, 679) - (611, 760)
[Fri Oct 21 13:08:26 2011] Writing fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4.gif
[Fri Oct 21 13:08:30 2011] ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_src.evt and ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct 21 13:08:30 2011] Size of ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_src.evt.gz[events] = 23 counts
[Fri Oct 21 13:08:30 2011] Mean chipx,y = (382.78, 504.96)
[Fri Oct 21 13:08:30 2011] Mean tdetx,y = (4627.04, 3443.78)
[Fri Oct 21 13:08:30 2011] chipx,y range = (361.00-401.00, 488.00-520.00)
[Fri Oct 21 13:08:30 2011] Size of ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 40 counts
[Fri Oct 21 13:08:30 2011] ../../acisf11726/products/images/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_src.img and ../../acisf11726/products/images/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct 21 13:08:30 2011] ../../acisf11726/products/spectra/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_src.pi and ../../acisf11726/products/spectra/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct 21 13:08:30 2011] Not generating rmf since there are only 22 counts
[Fri Oct 21 13:08:34 2011] ../../acisf11726/products/lightcurves/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_src.lc and ../../acisf11726/products/lightcurves/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct 21 13:09:35 2011] 185.817
[Fri Oct 21 13:09:42 2011] Updating aperture counts using extracted products
[Fri Oct 21 13:09:42 2011] Error reading totcts from fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct 21 13:09:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 13:09:42 2011] Using photon index=1.80, rate=0.00106, arf fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4.arf
[Fri Oct 21 13:09:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 13:09:42 2011] Updating source flux to 1.4e-14
[Fri Oct 21 13:09:51 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 21 13:09:52 2011] acisf11726/analysis//spectral/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete