[Fri Oct 21 13:05:10 2011] Detection parameters:
  Position = (300.4, 861.2) = 15 39 44.23 34 29 5.4
  Extent = 0.6" x 0.5", rotation angle = 133 degrees
  Source counts = 16.8 +/- 4.2
  Background counts = 1.2
  Rate = 0.0008 +/- 0.0002

[Fri Oct 21 13:05:11 2011] Off-axis axis estimate = 4.65'
[Fri Oct 21 13:05:58 2011] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 13:05:58 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Fri Oct 21 13:05:58 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.905
[Fri Oct 21 13:05:58 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 1.05"
[Fri Oct 21 13:05:58 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src4.ximg exists
[Fri Oct 21 13:05:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src4.csv
[Fri Oct 21 13:05:58 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Oct 21 13:05:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src4.csv
[Fri Oct 21 13:05:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11726_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 13:05:59 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct 21 13:05:59 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct 21 13:05:59 2011] Fit fullrun_ccd3_acisf11726_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Oct 21 13:06:08 2011] Spatial fit model total counts = 18.457800, observed total counts = 19.000000
[Fri Oct 21 13:06:08 2011] Offset between fit and detection position for source 2 = 1.039149 pixels
[Fri Oct 21 13:06:08 2011] 18.486279 total counts/ 0.455679 bgd. counts: snr = 26.710417
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.039149 pixels
  Position = (301.1, 862.0) = 15 39 44.22 34 29 5.5
  Extent = 1.0 (0.6-1.2)", rotation angle = 0
  Source counts = 18.0 +/- 4.3
  Background counts = 0.5
  Rate = 0.0009 +/- 0.0002
[Fri Oct 21 13:06:08 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 13:06:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 13:06:08 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 13:06:08 2011] Source does appear to be extended
[Fri Oct 21 13:06:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 13:06:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 13:06:25 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Fri Oct 21 13:06:25 2011] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.168
[Fri Oct 21 13:06:25 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 1.00"
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct 21 13:06:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src4.csv
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct 21 13:06:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src4.csv
[Fri Oct 21 13:06:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11726_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct 21 13:06:26 2011] fullrun_ccd3_acisf11726_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct 21 13:06:26 2011] Fit fullrun_ccd3_acisf11726_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Oct 21 13:06:33 2011] Spatial fit model total counts = 18.659300, observed total counts = 19.000000
[Fri Oct 21 13:06:33 2011] Offset between fit and detection position for source 2 = 0.118911 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.118911 pixels
  Position = (301.0, 862.1) = 15 39 44.23 34 29 5.5
  Extent = 1.1 (0.7-1.3)", rotation angle = 0
  Source counts = 18.7 +/- 4.3
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Fri Oct 21 13:06:33 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 13:06:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 13:06:33 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 13:06:33 2011] Source does appear to be extended
[Fri Oct 21 13:06:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 13:08:26 2011] Not overwriting source region fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 21 13:08:26 2011] Extracting stamp from image fullrun_ccd3_acisf11726_pi14-548_cl_sm2.00.img.gz, (253, 814) - (349, 910)
[Fri Oct 21 13:08:26 2011] Writing fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2.gif
[Fri Oct 21 13:08:37 2011] ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_src.evt and ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 21 13:08:37 2011] Size of ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_src.evt.gz[events] = 19 counts
[Fri Oct 21 13:08:37 2011] Mean chipx,y = (202.79, 750.16)
[Fri Oct 21 13:08:37 2011] Mean tdetx,y = (4381.84, 3263.79)
[Fri Oct 21 13:08:37 2011] chipx,y range = (182.00-221.00, 732.00-766.00)
[Fri Oct 21 13:08:37 2011] Size of ../../acisf11726/products/events/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 37 counts
[Fri Oct 21 13:08:37 2011] ../../acisf11726/products/images/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_src.img and ../../acisf11726/products/images/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 21 13:08:37 2011] ../../acisf11726/products/spectra/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_src.pi and ../../acisf11726/products/spectra/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 21 13:08:37 2011] Not generating rmf since there are only 18 counts
[Fri Oct 21 13:08:40 2011] ../../acisf11726/products/lightcurves/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_src.lc and ../../acisf11726/products/lightcurves/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 21 13:09:35 2011] 183.134
[Fri Oct 21 13:09:42 2011] Updating aperture counts using extracted products
[Fri Oct 21 13:09:42 2011] Error reading totcts from fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 21 13:09:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 13:09:42 2011] Using photon index=1.80, rate=0.000895, arf fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2.arf
[Fri Oct 21 13:09:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 13:09:42 2011] Updating source flux to 1.2e-14
[Fri Oct 21 13:09:51 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 21 13:09:52 2011] acisf11726/analysis//spectral/fullrun_ccd3_acisf11726_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete