[Fri Sep 30 03:21:27 2011] Detection parameters:
  Position = (898.4, 591.2) = 7 31 59.79 31 36 20.8
  Extent = 1.3" x 1.1", rotation angle = 102 degrees
  Source counts = 17.7 +/- 4.4
  Background counts = 1.3
  Rate = 0.002 +/- 0.0004

[Fri Sep 30 03:21:28 2011] Off-axis axis estimate = 6.02'
[Fri Sep 30 03:22:13 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 03:22:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 03:22:13 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Fri Sep 30 03:22:13 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.953
[Fri Sep 30 03:22:13 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.64"
[Fri Sep 30 03:22:13 2011] fullrun_ccd3_acisf11723_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 30 03:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11723_pi14-548_cl_pass0_src2.csv
[Fri Sep 30 03:22:13 2011] fullrun_ccd3_acisf11723_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 30 03:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11723_pi14-548_cl_pass0_src2.csv
[Fri Sep 30 03:22:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11723_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11723_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 03:22:13 2011] fullrun_ccd3_acisf11723_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 30 03:22:13 2011] fullrun_ccd3_acisf11723_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 30 03:22:13 2011] Fit fullrun_ccd3_acisf11723_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 30 03:22:22 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 18.041161 pixels away
[Fri Sep 30 03:22:22 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 03:22:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 03:22:22 2011] Assessing source extent using major
[Fri Sep 30 03:22:22 2011] Source does appear to be extended
[Fri Sep 30 03:22:22 2011] Computing asymmetry using major and minor axis, asym = 1.14
[Fri Sep 30 03:22:43 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 03:22:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 03:22:43 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Fri Sep 30 03:22:43 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.953
[Fri Sep 30 03:22:43 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.64"
[Fri Sep 30 03:22:47 2011] fullrun_ccd3_acisf11723_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 30 03:22:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11723_pi14-548_cl_pass1_src2.csv
[Fri Sep 30 03:22:47 2011] fullrun_ccd3_acisf11723_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 30 03:22:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11723_pi14-548_cl_pass1_src2.csv
[Fri Sep 30 03:22:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11723_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11723_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 03:22:47 2011] fullrun_ccd3_acisf11723_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 30 03:22:47 2011] fullrun_ccd3_acisf11723_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 30 03:22:47 2011] Fit fullrun_ccd3_acisf11723_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 30 03:22:51 2011] Spatial fit model total counts = 17.571000, observed total counts = 19.000000
[Fri Sep 30 03:22:51 2011] Offset between fit and detection position for source 3 = 1.692530 pixels
[Fri Sep 30 03:22:51 2011] 17.794850 total counts/ 3.069950 bgd. counts: snr = 8.404013
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.692530 pixels
  Position = (900.0, 590.6) = 7 31 59.74 31 36 20.2
  Extent = 1.5 (1.1-2.3)" x 0.5 (0.4-0.7)", rotation angle = 124 (110-136) degrees
  Source counts = 14.7 +/- 4.2
  Background counts = 3.1
  Rate = 0.001 +/- 0.0004
[Fri Sep 30 03:22:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 03:22:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 03:22:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 03:22:51 2011] Source does appear to be extended
[Fri Sep 30 03:22:51 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.48
[Fri Sep 30 03:24:12 2011] Not overwriting source region fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 30 03:24:12 2011] Extracting stamp from image fullrun_ccd3_acisf11723_pi14-548_cl_sm2.00.img.gz, (829, 520) - (971, 661)
[Fri Sep 30 03:24:12 2011] Writing fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3.gif
[Fri Sep 30 03:24:16 2011] ../../acisf11723/products/events/fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_src.evt and ../../acisf11723/products/events/fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Sep 30 03:24:16 2011] Size of ../../acisf11723/products/events/fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_src.evt.gz[events] = 14 counts
[Fri Sep 30 03:24:16 2011] Mean chipx,y = (192.57, 490.21)
[Fri Sep 30 03:24:16 2011] Mean tdetx,y = (4641.79, 3253.57)
[Fri Sep 30 03:24:16 2011] chipx,y range = (172.00-205.00, 472.00-507.00)
[Fri Sep 30 03:24:16 2011] Size of ../../acisf11723/products/events/fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 17 counts
[Fri Sep 30 03:24:16 2011] ../../acisf11723/products/images/fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_src.img and ../../acisf11723/products/images/fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Sep 30 03:24:16 2011] ../../acisf11723/products/spectra/fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_src.pi and ../../acisf11723/products/spectra/fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Sep 30 03:24:16 2011] Not generating rmf since there are only 14 counts
[Fri Sep 30 03:24:20 2011] ../../acisf11723/products/lightcurves/fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_src.lc and ../../acisf11723/products/lightcurves/fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Sep 30 03:24:46 2011] 174.254
[Fri Sep 30 03:24:49 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:24:49 2011] Error reading totcts from fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Sep 30 03:24:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:24:49 2011] Using photon index=1.80, rate=0.00149, arf fullrun_ccd3_acisf11723_pi14-548_pass1_cl_src3.arf
[Fri Sep 30 03:24:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 03:24:49 2011] Updating source flux to 2e-14
[Fri Sep 30 03:24:57 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting