[Wed Oct 19 15:32:29 2011] Detection parameters:
  Position = (313.5, 963.9) = 0 36 48.81 -43 19 16.9
  Extent = 4.1" x 3.9", rotation angle = 151 degrees
  Source counts = 162.2 +/- 19.5
  Background counts = 218.8
  Rate = 0.003 +/- 0.0003

[Wed Oct 19 15:32:29 2011] Off-axis axis estimate = 12.90'
[Wed Oct 19 15:33:32 2011] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 15:33:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 15:33:32 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Wed Oct 19 15:33:32 2011] source mask rpix=15.2, npix_max = 980, mask sum = 992, frac = 1.012
[Wed Oct 19 15:33:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.46"
[Wed Oct 19 15:33:33 2011] fullrun_ccd3_acisf11721_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 19 15:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11721_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 15:33:33 2011] fullrun_ccd3_acisf11721_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 19 15:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11721_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 15:33:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11721_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11721_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 15:33:33 2011] fullrun_ccd3_acisf11721_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 19 15:33:33 2011] fullrun_ccd3_acisf11721_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 19 15:33:33 2011] Fit fullrun_ccd3_acisf11721_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 19 15:33:42 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 82.313641 pixels away
[Wed Oct 19 15:33:42 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 15:33:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 15:33:42 2011] Assessing source extent using major
[Wed Oct 19 15:33:42 2011] Source does appear to be extended
[Wed Oct 19 15:33:42 2011] Computing asymmetry using major and minor axis, asym = 1.05
[Wed Oct 19 15:34:09 2011] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 15:34:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 15:34:09 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Wed Oct 19 15:34:09 2011] source mask rpix=15.2, npix_max = 980, mask sum = 992, frac = 1.012
[Wed Oct 19 15:34:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.46"
[Wed Oct 19 15:34:09 2011] fullrun_ccd3_acisf11721_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 19 15:34:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11721_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 15:34:09 2011] fullrun_ccd3_acisf11721_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 19 15:34:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11721_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 15:34:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11721_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11721_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 15:34:09 2011] fullrun_ccd3_acisf11721_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 19 15:34:09 2011] fullrun_ccd3_acisf11721_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 19 15:34:09 2011] Fit fullrun_ccd3_acisf11721_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 19 15:34:18 2011] Spatial fit model total counts = 566.491000, observed total counts = 565.000000
[Wed Oct 19 15:34:18 2011] Offset between fit and detection position for source 2 = 3.353197 pixels
[Wed Oct 19 15:34:18 2011] 566.188000 total counts/ 361.108000 bgd. counts: snr = 10.792070
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.353197 pixels
  Position = (311.3, 961.3) = 0 36 48.93 -43 19 18.4
  Extent = 8.1 (7.0-9.9)", rotation angle = 0
  Source counts = 205.1 +/- 23.8
  Background counts = 361.1
  Rate = 0.003 +/- 0.0004
[Wed Oct 19 15:34:18 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 15:34:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 15:34:18 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 15:34:18 2011] Source does appear to be extended
[Wed Oct 19 15:34:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 15:34:58 2011] Not overwriting source region fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_src.reg
[Wed Oct 19 15:34:58 2011] Extracting stamp from image fullrun_ccd3_acisf11721_pi14-548_cl_sm2.00.img.gz, (0, 590) - (683, 1333)
[Wed Oct 19 15:34:58 2011] Writing fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2.gif
[Wed Oct 19 15:34:59 2011] ../../acisf11721/products/events/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_src.evt and ../../acisf11721/products/events/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct 19 15:34:59 2011] Size of ../../acisf11721/products/events/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_src.evt.gz[events] = 542 counts
[Wed Oct 19 15:34:59 2011] Mean chipx,y = (719.34, 933.82)
[Wed Oct 19 15:34:59 2011] Mean tdetx,y = (4198.18, 3780.34)
[Wed Oct 19 15:34:59 2011] chipx,y range = (640.00-801.00, 858.00-1010.00)
[Wed Oct 19 15:34:59 2011] Size of ../../acisf11721/products/events/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 2417 counts
[Wed Oct 19 15:34:59 2011] ../../acisf11721/products/images/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_src.img and ../../acisf11721/products/images/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct 19 15:34:59 2011] ../../acisf11721/products/spectra/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_src.pi and ../../acisf11721/products/spectra/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct 19 15:35:02 2011] ../../acisf11721/products/lightcurves/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_src.lc and ../../acisf11721/products/lightcurves/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct 19 15:35:17 2011] Keeping rmf generated by specextract
[Wed Oct 19 15:35:17 2011] 149.933
[Wed Oct 19 15:38:08 2011] Updating aperture counts using extracted products
[Wed Oct 19 15:38:08 2011] Error reading totcts from fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct 19 15:38:08 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 15:38:08 2011] Using photon index=1.80, rate=0.00322, arf fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2.arf
[Wed Oct 19 15:38:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 15:38:08 2011] Updating source flux to 4.6e-14
[Wed Oct 19 15:38:24 2011] Reading fit data from acisf11721/analysis//spectral/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_pl.csv
[Wed Oct 19 15:38:24 2011] Spectral fit parameter nH value = 1.84298e+14
[Wed Oct 19 15:38:24 2011] Spectral fit parameter PhoIndex value = 1.44158
[Wed Oct 19 15:38:24 2011] Failed to get F(0.3-8.0) from acisf11721/analysis//spectral/fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Oct 19 15:38:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 15:38:24 2011] Using Nh = 1.8e+14, photon index=1.44, rate=0.00322, arf fullrun_ccd3_acisf11721_pi14-548_pass1_cl_src2.arf
[Wed Oct 19 15:38:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 15:38:24 2011] Updating source flux to 5.2e-14