[Fri Sep 30 21:23:20 2011] Detection parameters:
  Position = (689.0, 993.4) = 23 18 29.05 0 33 17.3
  Extent = 0.8" x 0.5", rotation angle = 39 degrees
  Source counts = 29.8 +/- 5.9
  Background counts = 5.2
  Rate = 0.0002 +/- 4e-05

[Fri Sep 30 21:23:22 2011] Off-axis axis estimate = 3.21'
[Fri Sep 30 21:24:51 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:24:51 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Sep 30 21:24:51 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.959
[Fri Sep 30 21:24:51 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.62"
[Fri Sep 30 21:24:53 2011] fullrun_ccd3_acisf11718_pi14-548_cl_pass0_src13.ximg exists
[Fri Sep 30 21:24:53 2011] fullrun_ccd3_acisf11718_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Sep 30 21:24:53 2011] Fit fullrun_ccd3_acisf11718_pi14-548_cl_pass0_src13 appears to have run properly
[Fri Sep 30 21:24:54 2011] fullrun_ccd3_acisf11718_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Sep 30 21:24:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11718_pi14-548_cl_pass0_tfrozen_src13.csv
[Fri Sep 30 21:24:54 2011] fullrun_ccd3_acisf11718_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Sep 30 21:24:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11718_pi14-548_cl_pass0_tfrozen_src13.csv
[Fri Sep 30 21:24:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11718_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11718_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:25:19 2011] Spatial fit model total counts = 34.223200, observed total counts = 40.000000
[Fri Sep 30 21:25:19 2011] Offset between fit and detection position for source 12 = 0.915760 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.915760 pixels
  Position = (689.7, 994.0) = 23 18 29.05 0 33 17.4
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 32.0 +/- 5.7
  Background counts = 0.0
  Rate = 0.0002 +/- 4e-05
[Fri Sep 30 21:25:19 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:25:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:25:19 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:25:19 2011] Source does appear to be extended
[Fri Sep 30 21:25:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:25:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:25:46 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Fri Sep 30 21:25:46 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.167
[Fri Sep 30 21:25:46 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.67"
[Fri Sep 30 21:25:47 2011] fullrun_ccd3_acisf11718_pi14-548_cl_pass1_src13.ximg exists
[Fri Sep 30 21:25:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11718_pi14-548_cl_pass1_src13.csv
[Fri Sep 30 21:25:47 2011] fullrun_ccd3_acisf11718_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Sep 30 21:25:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11718_pi14-548_cl_pass1_src13.csv
[Fri Sep 30 21:25:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11718_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11718_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:25:48 2011] fullrun_ccd3_acisf11718_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Sep 30 21:25:48 2011] fullrun_ccd3_acisf11718_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Sep 30 21:25:48 2011] Fit fullrun_ccd3_acisf11718_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Sep 30 21:26:08 2011] Spatial fit model total counts = 40.923300, observed total counts = 41.000000
[Fri Sep 30 21:26:08 2011] Offset between fit and detection position for source 12 = 0.080642 pixels
[Fri Sep 30 21:26:08 2011] 40.281400 total counts/ 10.593700 bgd. counts: snr = 9.121216
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.080642 pixels
  Position = (689.8, 994.0) = 23 18 29.05 0 33 17.3
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 29.7 +/- 6.3
  Background counts = 10.6
  Rate = 0.0002 +/- 4e-05
[Fri Sep 30 21:26:08 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:26:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:26:08 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:26:08 2011] Source does appear to be extended
[Fri Sep 30 21:26:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:31:37 2011] Not overwriting source region fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_src.reg
[Fri Sep 30 21:31:37 2011] Extracting stamp from image fullrun_ccd3_acisf11718_pi14-548_cl_sm2.00.img.gz, (661, 966) - (718, 1022)
[Fri Sep 30 21:31:37 2011] Writing fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12.gif
[Fri Sep 30 21:32:19 2011] ../../acisf11718/products/events/fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_src.evt and ../../acisf11718/products/events/fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri Sep 30 21:32:19 2011] Size of ../../acisf11718/products/events/fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_src.evt.gz[events] = 32 counts
[Fri Sep 30 21:32:19 2011] Mean chipx,y = (665.50, 760.59)
[Fri Sep 30 21:32:19 2011] Mean tdetx,y = (4371.41, 3726.50)
[Fri Sep 30 21:32:19 2011] chipx,y range = (650.00-680.00, 740.00-779.00)
[Fri Sep 30 21:32:19 2011] Size of ../../acisf11718/products/events/fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 42 counts
[Fri Sep 30 21:32:19 2011] ../../acisf11718/products/images/fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_src.img and ../../acisf11718/products/images/fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri Sep 30 21:32:19 2011] ../../acisf11718/products/spectra/fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_src.pi and ../../acisf11718/products/spectra/fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Fri Sep 30 21:32:19 2011] Not generating rmf since there are only 29 counts
[Fri Sep 30 21:32:22 2011] ../../acisf11718/products/lightcurves/fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_src.lc and ../../acisf11718/products/lightcurves/fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri Sep 30 21:33:37 2011] 186.057
[Fri Sep 30 21:34:01 2011] Updating aperture counts using extracted products
[Fri Sep 30 21:34:01 2011] Error reading totcts from fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12_src.pi.gz
[Fri Sep 30 21:34:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 21:34:02 2011] Using photon index=1.80, rate=0.000198, arf fullrun_ccd3_acisf11718_pi14-548_pass1_cl_src12.arf
[Fri Sep 30 21:34:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 21:34:02 2011] Updating source flux to 2.5e-15
[Fri Sep 30 21:34:49 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting