[Fri Sep 30 21:23:16 2011] Detection parameters:
  Position = (430.9, 806.4) = 23 18 20.89 0 39 10.0
  Extent = 0.5" x 0.5", rotation angle = 78 degrees
  Source counts = 27.0 +/- 5.7
  Background counts = 6.0
  Rate = 0.0002 +/- 4e-05

[Fri Sep 30 21:23:19 2011] Off-axis axis estimate = 4.16'
[Fri Sep 30 21:24:50 2011] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:24:50 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Fri Sep 30 21:24:50 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.955
[Fri Sep 30 21:24:50 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.88"
[Fri Sep 30 21:24:50 2011] fullrun_ccd2_acisf11718_pi14-548_cl_pass0_src16.ximg exists
[Fri Sep 30 21:24:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11718_pi14-548_cl_pass0_src16.csv
[Fri Sep 30 21:24:50 2011] fullrun_ccd2_acisf11718_pi14-548_cl_pass0_src16_1.ximg exists
[Fri Sep 30 21:24:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11718_pi14-548_cl_pass0_src16.csv
[Fri Sep 30 21:24:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11718_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11718_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:24:51 2011] fullrun_ccd2_acisf11718_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Fri Sep 30 21:24:51 2011] fullrun_ccd2_acisf11718_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Sep 30 21:24:51 2011] Fit fullrun_ccd2_acisf11718_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Sep 30 21:25:15 2011] Source 11 is offset by -7.302016 and 6.502211 pixels which is larger than
2 X fitted extent = 0.894016 x 0.894016, not incorporating fit results
[Fri Sep 30 21:25:15 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:25:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:25:15 2011] Assessing source extent using major
[Fri Sep 30 21:25:15 2011] Source does appear to be extended
[Fri Sep 30 21:25:15 2011] Computing asymmetry using major and minor axis, asym = 1.02
[Fri Sep 30 21:25:44 2011] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:25:44 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Fri Sep 30 21:25:44 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.955
[Fri Sep 30 21:25:44 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.88"
[Fri Sep 30 21:25:45 2011] fullrun_ccd2_acisf11718_pi14-548_cl_pass1_src16.ximg exists
[Fri Sep 30 21:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11718_pi14-548_cl_pass1_src16.csv
[Fri Sep 30 21:25:45 2011] fullrun_ccd2_acisf11718_pi14-548_cl_pass1_src16_1.ximg exists
[Fri Sep 30 21:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11718_pi14-548_cl_pass1_src16.csv
[Fri Sep 30 21:25:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11718_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11718_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:25:46 2011] fullrun_ccd2_acisf11718_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Fri Sep 30 21:25:46 2011] fullrun_ccd2_acisf11718_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Sep 30 21:25:46 2011] Fit fullrun_ccd2_acisf11718_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Sep 30 21:26:04 2011] Spatial fit model total counts = 43.881900, observed total counts = 42.000000
[Fri Sep 30 21:26:04 2011] Offset between fit and detection position for source 11 = 0.589015 pixels
[Fri Sep 30 21:26:04 2011] 43.609000 total counts/ 23.923000 bgd. counts: snr = 4.024850
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.589015 pixels
  Position = (431.4, 806.6) = 23 18 20.89 0 39 9.9
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source counts = 19.7 +/- 6.6
  Background counts = 23.9
  Rate = 0.0001 +/- 4e-05
[Fri Sep 30 21:26:04 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:26:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:26:04 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:26:04 2011] Source does appear to be extended
[Fri Sep 30 21:26:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:29:31 2011] Not overwriting source region fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_src.reg
[Fri Sep 30 21:29:31 2011] Extracting stamp from image fullrun_ccd2_acisf11718_pi14-548_cl_sm2.00.img.gz, (401, 776) - (462, 837)
[Fri Sep 30 21:29:31 2011] Writing fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11.gif
[Fri Sep 30 21:30:21 2011] ../../acisf11718/products/events/fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_src.evt and ../../acisf11718/products/events/fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Sep 30 21:30:21 2011] Size of ../../acisf11718/products/events/fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_src.evt.gz[events] = 27 counts
[Fri Sep 30 21:30:21 2011] Mean chipx,y = (225.37, 565.48)
[Fri Sep 30 21:30:21 2011] Mean tdetx,y = (3626.48, 3860.63)
[Fri Sep 30 21:30:21 2011] chipx,y range = (207.00-241.00, 543.00-580.00)
[Fri Sep 30 21:30:22 2011] Size of ../../acisf11718/products/events/fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 58 counts
[Fri Sep 30 21:30:22 2011] ../../acisf11718/products/images/fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_src.img and ../../acisf11718/products/images/fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Sep 30 21:30:22 2011] ../../acisf11718/products/spectra/fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_src.pi and ../../acisf11718/products/spectra/fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Sep 30 21:30:22 2011] Not generating rmf since there are only 19 counts
[Fri Sep 30 21:30:24 2011] ../../acisf11718/products/lightcurves/fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_src.lc and ../../acisf11718/products/lightcurves/fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Sep 30 21:31:36 2011] 184.106
[Fri Sep 30 21:34:00 2011] Updating aperture counts using extracted products
[Fri Sep 30 21:34:00 2011] Error reading totcts from fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Sep 30 21:34:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 21:34:01 2011] Using photon index=1.80, rate=0.000131, arf fullrun_ccd2_acisf11718_pi14-548_pass1_cl_src11.arf
[Fri Sep 30 21:34:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 21:34:01 2011] Updating source flux to 1.6e-15
[Fri Sep 30 21:34:45 2011] Flag b found in src. 11 procflags, skipping spectral fitting
[Fri Sep 30 21:34:45 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting