[Fri Sep 30 21:23:15 2011] Detection parameters:
  Position = (1016.6, 565.1) = 23 18 48.49 0 34 2.9
  Extent = 0.7" x 0.6", rotation angle = 174 degrees
  Source counts = 12.1 +/- 4.0
  Background counts = 3.9
  Rate = 8e-05 +/- 3e-05

[Fri Sep 30 21:23:16 2011] Off-axis axis estimate = 4.48'
[Fri Sep 30 21:24:47 2011] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:24:47 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Fri Sep 30 21:24:47 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.999
[Fri Sep 30 21:24:47 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 0.98"
[Fri Sep 30 21:24:49 2011] fullrun_ccd1_acisf11718_pi14-548_cl_pass0_src33.ximg exists
[Fri Sep 30 21:24:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11718_pi14-548_cl_pass0_src33.csv
[Fri Sep 30 21:24:49 2011] fullrun_ccd1_acisf11718_pi14-548_cl_pass0_src33_1.ximg exists
[Fri Sep 30 21:24:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11718_pi14-548_cl_pass0_src33.csv
[Fri Sep 30 21:24:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11718_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11718_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:24:49 2011] fullrun_ccd1_acisf11718_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Fri Sep 30 21:24:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11718_pi14-548_cl_pass0_tfrozen_src33.csv
[Fri Sep 30 21:24:49 2011] fullrun_ccd1_acisf11718_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Sep 30 21:24:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11718_pi14-548_cl_pass0_tfrozen_src33.csv
[Fri Sep 30 21:24:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11718_pi14-548_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11718_pi14-548_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:25:11 2011] Spatial fit model total counts = 21.848400, observed total counts = 27.000000
[Fri Sep 30 21:25:11 2011] Offset between fit and detection position for source 45 = 0.857143 pixels
[Fri Sep 30 21:25:11 2011] 21.772740 total counts/ 0.000040 bgd. counts: snr = 3439.034346
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.857143 pixels
  Position = (1016.8, 565.9) = 23 18 48.50 0 34 3.1
  Extent = 1.2 (0.7-1.7)", rotation angle = 0
  Source counts = 21.8 +/- 4.7
  Background counts = 0.0
  Rate = 0.0001 +/- 3e-05
[Fri Sep 30 21:25:11 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:25:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:25:11 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:25:11 2011] Source does appear to be extended
[Fri Sep 30 21:25:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:25:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:25:42 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Fri Sep 30 21:25:42 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Fri Sep 30 21:25:42 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 1.24"
[Fri Sep 30 21:25:44 2011] fullrun_ccd1_acisf11718_pi14-548_cl_pass1_src33.ximg exists
[Fri Sep 30 21:25:44 2011] fullrun_ccd1_acisf11718_pi14-548_cl_pass1_src33_1.ximg exists
[Fri Sep 30 21:25:44 2011] Fit fullrun_ccd1_acisf11718_pi14-548_cl_pass1_src33 appears to have run properly
[Fri Sep 30 21:25:44 2011] fullrun_ccd1_acisf11718_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Fri Sep 30 21:25:44 2011] fullrun_ccd1_acisf11718_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Sep 30 21:25:44 2011] Fit fullrun_ccd1_acisf11718_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Fri Sep 30 21:26:00 2011] Spatial fit model total counts = 23.467900, observed total counts = 25.000000
[Fri Sep 30 21:26:00 2011] Offset between fit and detection position for source 45 = 1.040447 pixels
[Fri Sep 30 21:26:00 2011] 23.792700 total counts/ 0.000000 bgd. counts: snr = 297751827490300.125000
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.040447 pixels
  Position = (1016.0, 566.5) = 23 18 48.52 0 34 3.3
  Extent = 1.4 (0.9-1.8)", rotation angle = 0
  Source counts = 23.8 +/- 4.9
  Background counts = 0.0
  Rate = 0.0002 +/- 3e-05
[Fri Sep 30 21:26:00 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:26:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:26:00 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:26:00 2011] Source does appear to be extended
[Fri Sep 30 21:26:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:27:29 2011] Not overwriting source region fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_src.reg
[Fri Sep 30 21:27:29 2011] Extracting stamp from image fullrun_ccd1_acisf11718_pi14-548_cl_sm2.00.img.gz, (954, 505) - (1078, 629)
[Fri Sep 30 21:27:29 2011] Writing fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45.gif
[Fri Sep 30 21:29:12 2011] ../../acisf11718/products/events/fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_src.evt and ../../acisf11718/products/events/fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_bgd.evt exist, delete to re-create
[Fri Sep 30 21:29:12 2011] Size of ../../acisf11718/products/events/fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_src.evt.gz[events] = 32 counts
[Fri Sep 30 21:29:12 2011] Mean chipx,y = (175.47, 547.22)
[Fri Sep 30 21:29:12 2011] Mean tdetx,y = (4584.78, 4282.47)
[Fri Sep 30 21:29:12 2011] chipx,y range = (161.00-198.00, 528.00-565.00)
[Fri Sep 30 21:29:12 2011] Size of ../../acisf11718/products/events/fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_bgd.evt.gz[events] = 226 counts
[Fri Sep 30 21:29:12 2011] ../../acisf11718/products/images/fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_src.img and ../../acisf11718/products/images/fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_bgd.img exist, delete to re-create
[Fri Sep 30 21:29:12 2011] ../../acisf11718/products/spectra/fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_src.pi and ../../acisf11718/products/spectra/fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_bgd.pi exist, delete to re-create
[Fri Sep 30 21:29:12 2011] Not generating rmf since there are only 23 counts
[Fri Sep 30 21:29:15 2011] ../../acisf11718/products/lightcurves/fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_src.lc and ../../acisf11718/products/lightcurves/fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_bgd.lc exist, delete to re-create
[Fri Sep 30 21:29:30 2011] 183.987
[Fri Sep 30 21:34:00 2011] Updating aperture counts using extracted products
[Fri Sep 30 21:34:00 2011] Error reading totcts from fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45_src.pi.gz
[Fri Sep 30 21:34:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 21:34:00 2011] Using photon index=1.80, rate=0.000159, arf fullrun_ccd1_acisf11718_pi14-548_pass1_cl_src45.arf
[Fri Sep 30 21:34:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 21:34:00 2011] Updating source flux to 2e-15
[Fri Sep 30 21:34:26 2011] Source 45 has fewer than 100.000000 counts, skipping spectral fitting