[Fri Sep 30 21:23:10 2011] Detection parameters:
  Position = (1108.0, 729.7) = 23 18 28.37 0 42 52.1
  Extent = 2.0" x 1.6", rotation angle = 84 degrees
  Source counts = 145.0 +/- 13.2
  Background counts = 30.0
  Rate = 0.001 +/- 9e-05

[Fri Sep 30 21:23:12 2011] Off-axis axis estimate = 6.64'
[Fri Sep 30 21:24:46 2011] Using EEF radius (= 1.97 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:24:46 2011] Initial guess for spatial extent in simple fitting = 1.97"
[Fri Sep 30 21:24:46 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.998
[Fri Sep 30 21:24:46 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.97"
[Fri Sep 30 21:24:46 2011] fullrun_ccd0_acisf11718_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 30 21:24:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11718_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 21:24:46 2011] fullrun_ccd0_acisf11718_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 30 21:24:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11718_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 21:24:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11718_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11718_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:24:47 2011] fullrun_ccd0_acisf11718_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 30 21:24:47 2011] fullrun_ccd0_acisf11718_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 30 21:24:47 2011] Fit fullrun_ccd0_acisf11718_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 30 21:25:03 2011] Spatial fit model total counts = 168.000000, observed total counts = 168.000000
[Fri Sep 30 21:25:03 2011] Offset between fit and detection position for source 3 = 1.171483 pixels
[Fri Sep 30 21:25:03 2011] 168.244600 total counts/ 47.891600 bgd. counts: snr = 17.391108
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.171483 pixels
  Position = (1108.9, 730.4) = 23 18 28.35 0 42 52.2
  Extent = 1.6 (1.3-2.0)", rotation angle = 0
  Source counts = 120.4 +/- 13.0
  Background counts = 47.9
  Rate = 0.0008 +/- 9e-05
[Fri Sep 30 21:25:03 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:25:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:25:03 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:25:03 2011] Source does appear to be extended
[Fri Sep 30 21:25:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:25:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:25:41 2011] Initial guess for spatial extent in simple fitting = 1.61"
[Fri Sep 30 21:25:41 2011] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.979
[Fri Sep 30 21:25:41 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.61"
[Fri Sep 30 21:25:41 2011] fullrun_ccd0_acisf11718_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 30 21:25:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11718_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 21:25:41 2011] fullrun_ccd0_acisf11718_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 30 21:25:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11718_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 21:25:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11718_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11718_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:25:42 2011] fullrun_ccd0_acisf11718_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 30 21:25:42 2011] fullrun_ccd0_acisf11718_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 30 21:25:42 2011] Fit fullrun_ccd0_acisf11718_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 30 21:25:55 2011] Spatial fit model total counts = 152.712000, observed total counts = 153.000000
[Fri Sep 30 21:25:55 2011] Offset between fit and detection position for source 3 = 0.212605 pixels
[Fri Sep 30 21:25:55 2011] 152.128000 total counts/ 30.821000 bgd. counts: snr = 21.850556
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.212605 pixels
  Position = (1109.1, 730.3) = 23 18 28.35 0 42 52.1
  Extent = 1.6 (1.3-1.9)", rotation angle = 0
  Source counts = 121.3 +/- 12.3
  Background counts = 30.8
  Rate = 0.0008 +/- 8e-05
[Fri Sep 30 21:25:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:25:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:25:55 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:25:55 2011] Source does appear to be extended
[Fri Sep 30 21:25:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:26:30 2011] Not overwriting source region fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 30 21:26:30 2011] Extracting stamp from image fullrun_ccd0_acisf11718_pi14-548_cl_sm2.00.img.gz, (1035, 656) - (1183, 804)
[Fri Sep 30 21:26:30 2011] Writing fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3.gif
[Fri Sep 30 21:26:38 2011] ../../acisf11718/products/events/fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_src.evt and ../../acisf11718/products/events/fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Sep 30 21:26:38 2011] Size of ../../acisf11718/products/events/fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_src.evt.gz[events] = 167 counts
[Fri Sep 30 21:26:38 2011] Mean chipx,y = (846.59, 283.21)
[Fri Sep 30 21:26:38 2011] Mean tdetx,y = (3344.21, 4285.41)
[Fri Sep 30 21:26:38 2011] chipx,y range = (824.00-873.00, 258.00-308.00)
[Fri Sep 30 21:26:38 2011] Size of ../../acisf11718/products/events/fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 244 counts
[Fri Sep 30 21:26:38 2011] ../../acisf11718/products/images/fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_src.img and ../../acisf11718/products/images/fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Sep 30 21:26:38 2011] ../../acisf11718/products/spectra/fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_src.pi and ../../acisf11718/products/spectra/fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Sep 30 21:26:42 2011] ../../acisf11718/products/lightcurves/fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_src.lc and ../../acisf11718/products/lightcurves/fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Sep 30 21:27:28 2011] Keeping rmf generated by specextract
[Fri Sep 30 21:27:28 2011] 176.763
[Fri Sep 30 21:33:59 2011] Updating aperture counts using extracted products
[Fri Sep 30 21:33:59 2011] Error reading totcts from fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Sep 30 21:33:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 21:33:59 2011] Using photon index=1.80, rate=0.000809, arf fullrun_ccd0_acisf11718_pi14-548_pass1_cl_src3.arf
[Fri Sep 30 21:33:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 21:33:59 2011] Updating source flux to 1.1e-14