[Fri Sep 23 15:57:57 2011] Detection parameters:
  Position = (753.1, 1138.4) = 2 54 35.60 41 35 46.8
  Extent = 0.5" x 0.5", rotation angle = 111 degrees
  Source counts = 143.0 +/- 12.6
  Background counts = 16.0
  Rate = 0.004 +/- 0.0003

[Fri Sep 23 15:57:59 2011] Off-axis axis estimate = 2.25'
[Fri Sep 23 15:59:55 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 15:59:55 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Sep 23 15:59:55 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.731
[Fri Sep 23 15:59:55 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.46"
[Fri Sep 23 15:59:56 2011] fullrun_ccd3_acisf11717_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 23 15:59:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11717_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 15:59:56 2011] fullrun_ccd3_acisf11717_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 23 15:59:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11717_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 15:59:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11717_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11717_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 15:59:56 2011] fullrun_ccd3_acisf11717_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 23 15:59:56 2011] fullrun_ccd3_acisf11717_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 23 15:59:56 2011] Fit fullrun_ccd3_acisf11717_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 23 16:00:08 2011] Spatial fit model total counts = 192.390000, observed total counts = 205.000000
[Fri Sep 23 16:00:08 2011] Offset between fit and detection position for source 2 = 0.707819 pixels
[Fri Sep 23 16:00:08 2011] 192.947700 total counts/ 39.848700 bgd. counts: snr = 24.252989
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.707819 pixels
  Position = (753.5, 1138.9) = 2 54 35.60 41 35 46.8
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 153.1 +/- 13.9
  Background counts = 39.8
  Rate = 0.004 +/- 0.0004
[Fri Sep 23 16:00:08 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 16:00:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 16:00:08 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 16:00:08 2011] Source does appear to be extended
[Fri Sep 23 16:00:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:00:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:00:40 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Sep 23 16:00:40 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.128
[Fri Sep 23 16:00:40 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.45"
[Fri Sep 23 16:00:41 2011] fullrun_ccd3_acisf11717_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 23 16:00:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11717_pi14-548_cl_pass1_src3.csv
[Fri Sep 23 16:00:41 2011] fullrun_ccd3_acisf11717_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 23 16:00:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11717_pi14-548_cl_pass1_src3.csv
[Fri Sep 23 16:00:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11717_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11717_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 16:00:41 2011] fullrun_ccd3_acisf11717_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 23 16:00:41 2011] fullrun_ccd3_acisf11717_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 23 16:00:41 2011] Fit fullrun_ccd3_acisf11717_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 23 16:00:49 2011] Spatial fit model total counts = 186.149000, observed total counts = 205.000000
[Fri Sep 23 16:00:49 2011] Offset between fit and detection position for source 2 = 0.004702 pixels
[Fri Sep 23 16:00:49 2011] 185.501400 total counts/ 31.486400 bgd. counts: snr = 27.447419
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.004702 pixels
  Position = (753.5, 1138.9) = 2 54 35.60 41 35 46.8
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 154.0 +/- 13.6
  Background counts = 31.5
  Rate = 0.004 +/- 0.0003
[Fri Sep 23 16:00:49 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 16:00:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 16:00:49 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 16:00:49 2011] Source does appear to be extended
[Fri Sep 23 16:00:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:02:30 2011] Not overwriting source region fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 23 16:02:30 2011] Extracting stamp from image fullrun_ccd3_acisf11717_pi14-548_cl_sm2.00.img.gz, (733, 1118) - (774, 1160)
[Fri Sep 23 16:02:30 2011] Writing fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2.gif
[Fri Sep 23 16:02:37 2011] ../../acisf11717/products/events/fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_src.evt and ../../acisf11717/products/events/fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 23 16:02:38 2011] Size of ../../acisf11717/products/events/fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_src.evt.gz[events] = 163 counts
[Fri Sep 23 16:02:38 2011] Mean chipx,y = (1011.39, 758.58)
[Fri Sep 23 16:02:38 2011] Mean tdetx,y = (4373.42, 4072.39)
[Fri Sep 23 16:02:38 2011] chipx,y range = (1001.00-1023.00, 740.00-775.00)
[Fri Sep 23 16:02:38 2011] Size of ../../acisf11717/products/events/fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 97 counts
[Fri Sep 23 16:02:38 2011] ../../acisf11717/products/images/fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_src.img and ../../acisf11717/products/images/fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 23 16:02:38 2011] ../../acisf11717/products/spectra/fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_src.pi and ../../acisf11717/products/spectra/fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 23 16:02:40 2011] ../../acisf11717/products/lightcurves/fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_src.lc and ../../acisf11717/products/lightcurves/fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 23 16:03:04 2011] Keeping rmf generated by specextract
[Fri Sep 23 16:03:04 2011] 113.578
[Fri Sep 23 16:03:09 2011] Updating aperture counts using extracted products
[Fri Sep 23 16:03:09 2011] Error reading totcts from fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 23 16:03:09 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 16:03:09 2011] Using photon index=1.80, rate=0.00389, arf fullrun_ccd3_acisf11717_pi14-548_pass1_cl_src2.arf
[Fri Sep 23 16:03:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 16:03:09 2011] Updating source flux to 7.8e-14