[Fri Sep 30 07:28:23 2011] Detection parameters:
  Position = (680.5, 76.1) = 3 20 14.31 41 20 22.0
  Extent = 1.3" x 1.1", rotation angle = 120 degrees
  Source counts = 98.7 +/- 14.6
  Background counts = 115.3
  Rate = 0.001 +/- 0.0002

[Fri Sep 30 07:28:25 2011] Off-axis axis estimate = 7.37'
[Fri Sep 30 07:40:27 2011] Using EEF radius (= 2.41 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 07:40:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 07:40:27 2011] Initial guess for spatial extent in simple fitting = 2.41"
[Fri Sep 30 07:40:27 2011] source mask rpix=4.9, npix_max = 116, mask sum = 110, frac = 0.947
[Fri Sep 30 07:40:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.41"
[Fri Sep 30 07:40:28 2011] fullrun_ccd3_acisf11715_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 07:40:28 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11715_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 07:40:28 2011] fullrun_ccd3_acisf11715_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 07:40:28 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11715_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 07:40:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11715_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11715_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 07:40:28 2011] fullrun_ccd3_acisf11715_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 07:40:29 2011] fullrun_ccd3_acisf11715_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 07:40:29 2011] Fit fullrun_ccd3_acisf11715_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 07:41:03 2011] Spatial fit model total counts = 421.000000, observed total counts = 421.000000
[Fri Sep 30 07:41:03 2011] Offset between fit and detection position for source 1 = 0.891316 pixels
[Fri Sep 30 07:41:03 2011] 424.157900 total counts/ 340.786000 bgd. counts: snr = 4.516259
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.891316 pixels
  Position = (681.3, 75.6) = 3 20 14.30 41 20 21.6
  Extent = 1.9 (1.4-3.2)", rotation angle = 0
  Source counts = 83.4 +/- 20.6
  Background counts = 340.8
  Rate = 0.001 +/- 0.0003
[Fri Sep 30 07:41:03 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 07:41:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 07:41:03 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 07:41:03 2011] Source does appear to be extended
[Fri Sep 30 07:41:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 07:41:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 07:41:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 07:41:43 2011] Initial guess for spatial extent in simple fitting = 1.95"
[Fri Sep 30 07:41:43 2011] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.020
[Fri Sep 30 07:41:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.95"
[Fri Sep 30 07:41:44 2011] fullrun_ccd3_acisf11715_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 07:41:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11715_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 07:41:44 2011] fullrun_ccd3_acisf11715_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 07:41:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11715_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 07:41:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11715_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11715_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 07:41:44 2011] fullrun_ccd3_acisf11715_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 07:41:44 2011] fullrun_ccd3_acisf11715_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 07:41:44 2011] Fit fullrun_ccd3_acisf11715_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 07:41:57 2011] Spatial fit model total counts = 306.747000, observed total counts = 307.000000
[Fri Sep 30 07:41:57 2011] Offset between fit and detection position for source 1 = 0.209549 pixels
[Fri Sep 30 07:41:57 2011] 310.232600 total counts/ 237.359000 bgd. counts: snr = 4.730068
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.209549 pixels
  Position = (681.3, 75.4) = 3 20 14.30 41 20 21.5
  Extent = 1.8 (1.2-2.7)", rotation angle = 0
  Source counts = 72.9 +/- 17.6
  Background counts = 237.4
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 07:41:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 07:41:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 07:41:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 07:41:57 2011] Source does appear to be extended
[Fri Sep 30 07:41:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 07:47:01 2011] Not overwriting source region fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 07:47:01 2011] Extracting stamp from image fullrun_ccd3_acisf11715_pi14-548_cl_sm2.00.img.gz, (600, 0) - (762, 157)
[Fri Sep 30 07:47:01 2011] Writing fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 07:47:01 2011] ../../acisf11715/products/events/fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_src.evt and ../../acisf11715/products/events/fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 07:47:01 2011] Size of ../../acisf11715/products/events/fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_src.evt.gz[events] = 237 counts
[Fri Sep 30 07:47:01 2011] Mean chipx,y = (58.06, 983.09)
[Fri Sep 30 07:47:01 2011] Mean tdetx,y = (4148.91, 3119.06)
[Fri Sep 30 07:47:01 2011] chipx,y range = (30.00-86.00, 952.00-1011.00)
[Fri Sep 30 07:47:02 2011] Size of ../../acisf11715/products/events/fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1220 counts
[Fri Sep 30 07:47:02 2011] ../../acisf11715/products/images/fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_src.img and ../../acisf11715/products/images/fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 07:47:02 2011] ../../acisf11715/products/spectra/fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_src.pi and ../../acisf11715/products/spectra/fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 07:47:02 2011] Not generating rmf since there are only 72 counts
[Fri Sep 30 07:47:06 2011] ../../acisf11715/products/lightcurves/fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_src.lc and ../../acisf11715/products/lightcurves/fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 07:47:33 2011] 165.248
[Fri Sep 30 07:47:41 2011] Updating aperture counts using extracted products
[Fri Sep 30 07:47:41 2011] Error reading totcts from fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 07:47:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 07:47:41 2011] Using photon index=1.80, rate=0.000993, arf fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 07:47:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 07:47:42 2011] Updating source flux to 1.4e-14
[Fri Sep 30 07:53:37 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 07:53:54 2011] acisf11715/analysis//spectral/fullrun_ccd3_acisf11715_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete